MIND Electronics

Complete vehicle lighting product line built on millimeter-scale RGB tri-color LED arrays. Independently designed drive control modules deliver colorful animated welcome effects and graphic light language for front and rear interactive display. The Mini-LED interactive screen integrates 96,000 LED light sources and 288,000 sub-pixels, supports customizable HD image display, and can perform rhythmic light shows together with the tail lamps.

Resolution: 4K; LED count: 96000; Sub-pixels: 288000; Viewing angle: 180°; Brightness: 2000 cd/m²; Communication protocol: CAN FD; Operating temperature: -40 ℃ ~ +85 ℃

• Front/rear interactive display
• Colorful animated welcome
• Graphic light language
• Multi-scenario communication between human, vehicle and environment
• Rhythmic light shows

Headlamp lighting module product line achieving illumination functions through multi-lens sequencing. The 22mm×44mm combination lighting module delivers LB 1000lm and HB 1600lm with a C-NCAP score above 8. The 15mm×100mm ultra-narrow high/low beam and ADB module supports free combinations of high beam, low beam and ADB with 20 zones, delivering LB 850lm, HB 1800lm and ADB 2000lm, all with passive cooling.

22mm×44mm combination module: LB 1000lm, HB 1600lm; 15mm×100mm ultra-narrow module: LB 850lm, HB 1800lm, ADB 2000lm, all passively cooled.

• High/low beam headlamp illumination
• ADB adaptive high beam
• Slim headlamp design
• Custom headlamp styling adaptation

Platform-based headlamp driver product line covering most customer headlamp project requirements with high, medium and low configurations. The LGDX29 to LGDX43 series integrated headlamp drivers support low beam, high beam, 24-zone ADB, daytime running/position/turn functions, with CAN bus control, FBL, FOTA, UDS diagnostics and network management, all at ASIL B functional safety level.

Zones: 24; Communication protocol: CAN FD; Functions: Low/high beam/DRL; Functional safety: ASIL B; Diagnostics: UDS / FOTA; Rated voltage: 12 V DC; Operating temperature: -40 ℃ ~ +85 ℃

• Headlamp LED drive control
• ADB adaptive high beam algorithm
• Dynamic welcome and flowing turn signals
• Vehicle lighting diagnostics and protection

Product line for new energy vehicle thermal management systems, developed with a nested family-style heat pump system concept offering differentiated system and component solutions. The platform-designed electric compressors cover 27-55cc displacement and support high-voltage platforms. The heat pump system operates reliably at -18°C with high efficiency and low power consumption, helping reduce vehicle energy consumption and extend cold-weather range.

Platform electric compressors cover 27-55cc displacement with high-voltage platform support; the heat pump system operates reliably at -18°C.

• NEV vehicle thermal management
• Heat pump air conditioning heating and cooling
• Battery fast-charging cooling
• High-voltage platform vehicles
• Low-energy vehicles for dual-carbon strategy

Cabin thermal management product line with integrated comprehensive management that improves the thermal environment, keeps thermal management electrical units in their optimal temperature range, and raises overall vehicle energy efficiency. The split HVAC unit saves energy and reduces noise by 5dB; its compact platform design delivers high capacity in small volume, integrating sterilization and mosquito-repellent functions to meet performance needs of different vehicle segments.

Cooling capacity: 5 kW; Heating capacity: 6 kW; COP: 3.5; Noise: ≤ 45 dB(A); Refrigerant: R134a / R1234yf; Voltage platform: 400 V DC; Weight: 18 kg; Operating temperature: -40 ℃ ~ +85 ℃

• Cabin air conditioning system
• HVAC heating and cooling
• Cabin health sterilization
• Multi-segment vehicle adaptation

Engine thermal management product line that continuously improves thermal efficiency and versatility through efficient operation, integrated management, and compact lightweight design. Products serve multiple purposes with flexible design, and modular supply improves vehicle assembly efficiency. Over 10 million units in the AC market with 18 years of accumulated experience.

Cooling capacity: 8 kW; Flow rate: 40 L/min; Working pressure: 0.2 MPa; Rated voltage: 12 V DC; Weight: 10 kg; Material: Aluminum alloy; Operating temperature: -40 ℃ ~ +120 ℃

• Engine cooling system
• Charge air cooling
• Vehicle aerodynamic drag optimization (AGS)
• Modular vehicle assembly

Complete vehicle wiring harness product line, the backbone of the automotive network. Based on the spatial positions and circuit logic of electrical equipment, sensors and control modules, it achieves physical electrical connections using wires and connectors. Capabilities include schematic design, 3D routing, 2D drawings and experimental simulation for complete vehicle E/E architecture or harnesses, customizable for new energy models.

Rated voltage: 600 V AC / 1000 V DC; Rated current: 200 A; Temperature rating: 125 ℃; Wire gauge: 0.5 ~ 120 mm²; Flame class: UL94 V-0; Length: Custom; Operating temperature: -40 ℃ ~ +125 ℃

• Vehicle LV power distribution and signal transmission
• NEV high-voltage power connection
• Vehicle E/E architecture design
• Automotive neural network cabling

Provides primary/secondary power distribution system integration solutions for vehicle E/E architecture and domain-control redundant power distribution solutions, integrating power distribution system integration, smart grid management, redundant power supply and fault diagnosis/self-recovery. E-fuse modules enable fine-grained control with 20% power wire gauge optimization, and power driver chip modules achieve microsecond-level intelligent control and monitoring.

Rated voltage: 48 V DC; Rated current: 300 A; Number of channels: 16; Ingress protection: IP67; Response time: 1 μs; Communication protocol: CAN FD; Operating temperature: -40 ℃ ~ +85 ℃

• Vehicle primary/secondary power distribution
• Redundant power for advanced autonomous driving
• Zonal electrical architecture
• Domain-control redundant power distribution

Automotive data transmission line product line. These dedicated cables transmit onboard AM/FM, 4G/5G, GPS, audio/video and inter-controller communication data in the vehicle electrical system, mainly connecting antennas, T-BOX, AV systems, displays, 360 surround view, DMS and various controllers. Strong anti-interference capability ensures effective RF signal transmission.

Data rate: 10 Gbps; Impedance: 50 Ω; Frequency range: DC ~ 6 GHz; Shielding: Double shielding; Temperature rating: 105 ℃; Length: Custom; Flame class: UL94 V-0

• Onboard antenna and T-BOX connection
• AV systems and displays
• 360 surround view cameras
• DMS driver monitoring
• Inter-controller communication

ADAS product line of the perception and intelligent control segment, offering 4D high-resolution point-cloud imaging millimeter-wave radar and ADAS cameras in multiple specifications. The radar supports BSD, LCA, DOW, RCW, CTA/CTB and other combined assisted driving functions; cameras cover 1M-8M resolutions with low-latency RAW data transmission and high dynamic range, supporting L2 and above assisted driving and urban NOA.

4D millimeter-wave radar with high-resolution point-cloud imaging; cameras cover 1M-8M resolutions with low-latency RAW transmission and high dynamic range.

• Combined assisted driving (L2/L2+/NOA)
• Blind spot monitoring and lane change assist
• 360 surround view imaging
• Door opening and rear collision warning

Product line for cabin health and experience. The sterilization module achieves a 99.9% cabin air sterilization rate with hidden, HVAC-integrated placement that saves space. The car refrigerator is mounted at the center console with compressor cooling, 16L large capacity and three adjustable modes (cooling 0-15°C, heating 35-50°C, keep-warm at 10°C), plus variable ambient lighting and an electrically self-locking pop-out drawer.

99.9% sterilization rate; 16L car refrigerator with three modes: cooling 0-15°C, heating 35-50°C, keep-warm at 10°C.

• Cabin air sterilization
• In-vehicle cooling and heating
• Center console storage experience
• HVAC-integrated health solution

Sends shifter position information as electronic signals via CAN bus to the TCU (transmission control unit) to realize automatic transmission PRND. The knob type offers 360° rotation with 16 stable positions; the lever type uses a 5-point single-stable pushrod structure; the column type consists of a combination switch, clock spring and angle sensor. All use dual-chip/dual-core MCU technology; knob and lever types reach ASIL-B and column type ASIL-D, with FOTA remote upgrade capability.

Knob type: 360° rotation with 16 stable positions; dual-chip/dual-core MCU, ASIL-B to ASIL-D, with FOTA support.

• Automatic transmission PRND shifting
• Shifting for BEV and MPV models
• Integrated steering wheel heating control
• Combined cruise, lighting and wiper control

Electrically openable and closable body components involving stamping, hemming and welding, parts assembly and module assembly processes, among the most complex body components to manufacture. The electric side step uses genuine imported motors with 80N·m torque, operating from -40°C to 85°C. The electric spoiler adjusts angle and height according to vehicle speed signals, optimizing drag coefficient and increasing rear downforce.

Electric side step: 80N·m torque, operating from -40°C to 85°C; electric spoiler adjusts adaptively with vehicle speed.

• Passenger entry/exit assistance
• High-speed driving stability improvement
• Drag optimization for lower fuel consumption and longer range
• Electric side steps for SUV/off-road vehicles