Shaoxing BYD Semiconductor Co., Ltd.

IGBT power modules from the Shaoxing site of BYD Semiconductor, listed under the power semiconductor catalogue with 96 part numbers. Module-format IGBTs cover 650 V to 1200 V platforms in industrial and automotive quality grades.

Model: BG series, 96 variants; Package series: 34 mm / 62 mm / genePACK2; VCES (V): 650-1200; IC (A): 25-1100; VCE(sat) (V) @25°C: 2.3 / 2.05 / 2.1; Eon (mJ) @25°C: 1.9 / 4 / 6; Eoff (mJ) @25°C: 2.8 / 2.6 / 5; Topology: half-bridge / half-bridge common-emitter / six-unit; Quality: industrial / automotive grade

• New energy vehicles
• Industrial control
• Inverter home appliances
• Photovoltaics
• Energy storage

Discrete IGBTs from BYD Semiconductor's Shaoxing site, with 36 part numbers under the power semiconductor section. Single-tube IGBT devices span 650 V to 1200 V platforms and serve industrial, appliance and new-energy vehicle markets.

Model: BGN/BGNE/BGME/BGQE/BGTE/BGKE/BGAE series, 36 variants; VCES (V): 650-1200; IC (A): 15-200; VCE(sat) (V) @25°C: 1.45-2.2; Eon (mJ) @25°C: 0.21-41; Eoff (mJ) @25°C: 0.26-11; Frequency (kHz): <=15 / <=20 / <=50; Quality: industrial / automotive grade; Topology: IGBT+FRD / IGBT

• New energy vehicles
• Industrial control
• Inverter home appliances
• Photovoltaics

Bare-die IGBT chips catalogued under the power semiconductor section with 45 codes. In-house IGBT generations (IGBT4.0 to IGBT6.0) back the module and discrete product lines across 650 V to 1200 V.

Model: BCG series, 45 variants; Type: IGBT4.0 / IGBT5.0 / IGBT6.0; VCES (V): 650-1200; IC (A): 15-280; VGS(th): 5-7 / 4.9-6.5 / 4-5.8; VCE(sat) (V) @25°C: 2.1 / 2.3 / 1.85; Frequency (kHz): 5-12 / >=12 / 40-80; TjMax (°C): 175

• New energy vehicles
• Industrial control
• Inverter home appliances
• Photovoltaics
• Energy storage

Fast-recovery diode bare chips matched to the IGBT die portfolio, 29 codes under the power semiconductor section. They are used together with IGBT chips in industrial control and automotive semiconductor applications.

Model: BCF series, 29 variants; Type: FRD 1.0 / FRD 2.0 / Bootstrap; VR (V): 650-1200; IF (A): 1-300; TjMax (°C): 150; VF (V): 1.5-24.7; trr (ns): 20-388

• Industrial control
• New energy vehicles

Intelligent power modules in DIP25 packages, 13 part numbers under the power semiconductor section. Driver and protection ICs are built in alongside low-loss IGBT dies, delivering efficient and reliable inversion for compact motor drive circuits.

Model: BIP/BIPE series DIP25, 13 variants; Series: DIP25; VCES (V): 600; IC (A): 10-30; VCE(SAT) (V) @25°C: 1.5-1.7; VISO (Vrms): 1500; Rbs (ohm): 30-230; VOT: available; Size (mm): 38x24

• Inverter home appliances
• Industrial control
• Motor drive

Low-loss intelligent power module in the DIP25-B-3215 package family, listed with 1 part number. Driver and protection ICs are integrated to support compact inverter designs for appliance motor drives.

Model: BIP60006B / BIP60010B; PN: DIP25-B-3215; VCES (V): 600; IC (A): 6-10; VCE(SAT) (V) @25°C: 1.7; VISO (Vrms): 1650; Rbs (ohm): 100; VOT: available; Size (mm): 32x15

• Inverter home appliances
• Motor drive

Intelligent power module in the DIP26-S package, catalogued with 1 part number. Built-in drive and protection functions make it suitable for motor-drive inverter stages in home appliances.

Model: BIPE60015S / BIPE60015S-T; PN: DIP26-S; VCES (V): 600; IC (A): 15; VCE(SAT) (V) @25°C: 1.5-1.7; VISO (Vrms): 2000; Rbs (ohm): 230; VOT: available; Size (mm): 32.8x18.8

• Inverter home appliances
• Motor drive

Intelligent power module of the BIP27-4426 package family, listed with 1 part number. With integrated driver and protection ICs, it realizes high-efficiency inversion for appliance and industrial motor control.

Model: BIPN60030C / BIPN60015C / BIPN60020C; PN: DIP27-4426; VCES (V): 600; IC (A): 15-50; VCE(SAT) (V) @25°C: 1.6-2; VISO (Vrms): 2500; Rbs (ohm): 25; VOT: without / available; Size (mm): 44x26

• Inverter home appliances
• Industrial control
• Motor drive

Intelligent power module of the BIP30-7931 package series, catalogued with 1 part number. It targets compact and efficient motor-drive control, with the bootstrap supply taken externally.

Model: BIP120035V; PN: DIP30-7931; VCES (V): 1200; IC (A): 35; VCE(SAT) (V) @25°C: 2.2; VISO (Vrms): 2500; Rbs (ohm): external bootstrap supply; VOT: available; Size (mm): 79x31

• Industrial control
• Motor drive

Silicon-carbide MOSFET single-tube products, 17 part numbers under the power semiconductor section. High switching frequency and low switching losses make them suitable for new energy vehicles and high-efficiency power supplies.

Model: BSKE/BSK/BSZE series, 17 variants; VDSS (V): 750-1500; RDS(on) (mohm): 15-105; ID (A): 22-100; Eon (mJ) @25°C: 0.08-2.39; Eoff (mJ) @25°C: 0.11-1.74; Frequency (kHz): <=200; Package: TO-247-4L / QDPAK

• New energy vehicles
• Industrial power supplies
• Photovoltaics

Shielded-gate trench MOSFETs, 5 part numbers under the power semiconductor section. Aimed at power supplies, DC-DC conversion modules, motor control and automotive electronics, they combine best-in-class performance with efficiency and thermal gains.

Model: BMSE/BMLE series, 5 variants; VDSS (V): 40-150; RDS(on) (mohm): 1.3-6; ID (A): 56-293; VGS(th) (V): 2.0-4.0 / 1.0-2.5 / 2.4-3.6; TJ (°C): -55 to 175 / -55 to 150; Package: PDFN5x6 / TO-220-3L

• New energy vehicles
• Power supplies
• DC-DC conversion
• Motor control

Superjunction MOSFET devices, 6 part numbers under the power semiconductor section. They serve power supplies, DC-DC conversion and motor control scenarios where high voltage and low on-resistance are required.

Model: BMLE/BMNE/BMKE series, 6 variants; VDSS (V): 650; RDS(on) (mohm): 41-110; ID (A): 30-80; VGS(th) (V): 3.0-5.0; TJ (°C): -55 to 150; Package: TO-220-3L / TO-247-3L / TO-247-4L

• Power supplies
• Industrial control
• New energy vehicles

Superjunction MOSFET power module, 1 part number under the power semiconductor section. Multiple die are integrated in one module package for compact power conversion stages.

Model: BMP110N65HN; VDSS (V): 650; RDS(on) (mohm): 105; ID (A): 30; Topology: half-bridge; Package: SOP-9

• Power supplies
• Industrial control
• New energy vehicles

Silicon-carbide MOSFET power modules, 7 products under the power semiconductor section. With half-bridge, six-unit and T-type three-level topologies on automotive package platforms, they target NEV motor controllers and high-efficiency power conversion.

Model: BM840/BM1040 series and V-305 platform, 7 products; VDSS (V): 750-1500; RDS(on) (mohm): 3.7 / 2.8 / 2.9; ID (A): 840 / 1040 / 1400; Eon (mJ) @25°C: 51 / 119 / 172.7; Eoff (mJ) @25°C: 25 / 92 / 100.1; Topology: six-unit / T-type three-level / half-bridge; Package: V305S6D / V305N6D / V305A6D

• NEV main drive
• On-board charging
• Industrial power supplies

Transient-voltage-suppression diodes, 6 part numbers under the power semiconductor section. They guard circuits against surges and ESD events and are widely used in industrial control and automotive electronics.

Model: BVE series, 6 variants; PPP (W): 400-5000; VPP (V): 12-54; IPP (A): 18-119; Polarity: unidirectional / bidirectional; Quality: automotive grade; Package: DO-214AC (SMA) / DO-214AA (SMB) / DO-214AB (SMC)

• Automotive electronics
• Industrial control
• Port protection

BYD automotive-grade MCU series validated to AEC-Q100 Grade 1 under IATF16949 production control, with safety capability up to ISO 26262 ASIL-B. It addresses body electronics such as vehicle lamps, motor control and charging connectors.

Model: BS32F030xBx6; Quality standard: AEC-Q100 Grade 1; Safety level: ISO 26262 ASIL-B (max); Core: 8-bit / 32-bit

• Vehicle lamps
• BLDC motor control
• Sensor detection
• Charging connectors
• Control panels
• PM2.5 detection

BS32G0 automotive-grade MCU certified to AEC-Q100 Grade 1, targeted at vehicle lamps, BLDC motor control and other body electronics functions.

Model: BS32G030xBx6; Quality standard: AEC-Q100 Grade 1; Safety level: ISO 26262 ASIL-B (max); Core: 8-bit / 32-bit

• Vehicle lamps
• BLDC motor control
• Charging connectors
• Body electronics

BS32F1 automotive-grade MCU with a 32-bit core, aimed at vehicle lamps, BLDC motor control and general body electronics duties.

Model: BS32F103xBx6; Quality standard: AEC-Q100 Grade 1; Safety level: ISO 26262 ASIL-B (max); Core: 8-bit / 32-bit

• Vehicle lamps
• BLDC motor control
• Body electronics

8-bit MCUs with integrated touch-key function, 4 part numbers under the smart control IC section. They fit smart locks, touch panels and household appliance controls.

Model: BF7112A, BS9000/BS9001 series, 4 variants; Core: 8051 4T / 8051 1T; Flash (byte): 30K / 30.5K / 62K; EEPROM (byte): 2K / 1K; RAM (byte): 1K / 2.25K / 4.25K; Frequency: 24 MHz; Voltage (V): 2.7-5.5 / 3.0-5.5; Temperature (°C): -40 to 125; Package: TSSOP / QFN

• Smart lock control
• Touch panels
• Home appliances

Dedicated 8-bit MCU for automotive ambient lighting, 1 part number under the smart control IC section. It targets LED lighting control scenarios such as in-car ambient light strips.

Model: BS9200AMXX; Core: 8051 1T; Flash (byte): 30.5K; EEPROM (byte): 1K; RAM (byte): 2.25K; Frequency: 24 MHz; Voltage (V): 6.0-18; Temperature (°C): -40 to 125; Package: ESOP

• Automotive ambient lighting
• Smart lighting

General-purpose MCUs with 32-bit cores, 6 part numbers under the smart control IC section. Based on Arm Cortex-M0/M0+/M4F, they cover home appliances, industrial control and consumer electronics.

Model: BF7006 and BS9018/BS9044/BS9046 series, 6 variants; Core: Arm Cortex-M0 / Cortex-M0+ / Cortex-M4F; Flash (byte): 96K / 256K / 512K; EEPROM (byte): 2K / 64K; RAM (byte): 4K / 6K / 32K; Frequency: 32 / 48 / 80 MHz; Voltage (V): 2.7-5.5 / 3.3-5.5 / 3.6-5.5; Temperature (°C): -40 to 125 / -40 to 105; Package: LQFP / TSSOP / QFN

• Home appliances
• Industrial control
• Consumer electronics

Application-specific MCUs for smart lock control, 2 part numbers under the smart control IC section. Lock control and security functions, including RF and touch keys, are integrated on chip.

Model: BF5820AM32 / BF5823AM48, 2 variants; Function: rear-board lock chip / 3-in-1 lock main controller with RF and touch keys; Package (mm): QFN32 4x4 / QFN48 5x5; Typical application: smart door lock rear board / main control; Power consumption: 10 uA @ 3.3 V / 55 uA (2 Hz card, 2 Hz key)

• Smart door locks
• Security

8-bit MCUs integrating touch, display and control in one chip, 4 part numbers under the home-appliance MCU section. Designed for appliance control panels with capacitive touch interaction.

Model: BF7611/BS7612/BF7613/BF7615 series, 4 variants; Core: 8051 1T; ROM (byte): 8K / 16K / 32K; DATA (byte): 1024-2048; RAM (byte): 512-4352; Voltage (V): 2.5-5.5 / 2.7-5.5; Temperature (°C): -40 to 105; Package: SOP / TSSOP / LQFP

• Home appliances
• Touch panels

General-purpose 8-bit MCUs, 4 part numbers under the home-appliance MCU section. They cover household appliance boards and generic control scenarios.

Model: BF7511/BS7512/BF7513/BF7515 series, 4 variants; Core: 8051 1T; ROM (byte): 8K / 16K / 32K; DATA (byte): 1024-2048; RAM (byte): 512-4352; Voltage (V): 2.1-5.5 / 2.7-5.5; Temperature (°C): -40 to 105; Package: SOP / TSSOP / LQFP

• Home appliances
• Industrial control

Industrial-grade 32-bit MCU integrating touch, display and control functions, 1 part number under the industrial 32-bit MCU section. Built for industrial human-machine panels and motor drive boards.

Model: BF7807AMXX; Core: Arm Cortex-M0+; ROM (byte): 128K; DATA (byte): 512; RAM (byte): 16K; Voltage (V): 2.7-5.5; Temperature (°C): -40 to 105; Package: LQFP

• Industrial control
• Motor drive

Industrial-grade general-purpose 32-bit MCUs, 2 part numbers under the industrial 32-bit MCU section. They serve industrial control boards, power stages and motor control units.

Model: BF7707AMXX / BF7905AMXX, 2 variants; Core: Arm Cortex-M0+; ROM (byte): 128K / 64K; DATA (byte): 512; RAM (byte): 12K; Voltage (V): 2.6-5.5; Temperature (°C): -40 to 105; Package: LQFP

• Industrial control
• Motor control
• Power supplies

Dedicated 32-bit motor-control MCU with on-chip motor control peripherals, 1 part number under the industrial 32-bit MCU section. Intended for BLDC and PMSM drives in industrial equipment.

Model: BF7905AMXX; Core: Arm Cortex-M0+; ROM (byte): 64K; DATA (byte): 512; RAM (byte): 12K; Voltage (V): 2.6-5.5; Temperature (°C): -40 to 105; Package: TSSOP

• Motor drive
• Variable-frequency control
• Industrial control

AC-DC power supply chip delivering a precise 5 V / 3 A output, 1 part number under the power IC section. A high-efficiency converter solution for chargers, adapters and appliance auxiliary supplies.

Model: BF1524; Package: SOT23-6; Voltage accuracy: ±5%; Current accuracy: ±5%; Conversion efficiency: >87%; No-load consumption: <75 mW; Integration: external MOS; Max output power: 15 W

• Chargers
• Adapters
• Appliance auxiliary power

AC-DC power supply chip with a 20 V / 3.25 A output, 1 part number under the power IC section. High output precision and energy efficiency target fast-charger and adapter designs.

Model: BF1526; Package: SSOP10; Voltage accuracy: ±3%; Current accuracy: ±3%; Conversion efficiency: >88%; No-load consumption: <75 mW; Integration: external MOS; Max output power: 65 W

• Fast chargers
• Adapters

AC-DC power supply chip with 20 V / 3.25 A output, 1 part number under the power IC section. Synchronous rectification support and a compact BOM enable high-density, high-efficiency adapter designs.

Model: BF1592; Package: SOT23-6; Static current: <460 uA; Reference accuracy: ±1%; Main function: synchronous rectification; Integration: external MOS; Max output power: 65 W

• Fast chargers
• Adapters

AC-DC power chips for EV charging connectors and charging-station auxiliary supplies, 2 part numbers under the power IC section. Built-in MOSFET simplifies the 12 W and 24 W auxiliary power designs.

Model: BF1554C / BF1554D, 2 variants; Package: SOP8; Voltage accuracy: ±5%; Current accuracy: ±5%; Conversion efficiency: >80%; No-load consumption: <75 mW; Integration: built-in MOS; Max output power: 12 W / 24 W

• EV charging connectors
• Charging pile auxiliary power

Protection IC for single-cell lithium-ion and LiFePO4 batteries with precision resistors on chip, 3 part numbers under the protection IC section. Integrating the resistors trims external component count for consumer battery packs.

Model: BM186 series, 3 variants; Normal current Typ: 2.0 uA; Overdischarge current Max: 0.5-1 uA; Overcharge detection voltage: 4.53-4.58 V; Overdischarge detection voltage: 2.4-2.53 V; Discharge overcurrent detection voltage 1: 4.380 V; Charge overcurrent detection voltage: 2.6-2.91 V; Short-circuit detection current: 16-21.5 A

• Lithium-ion battery protection
• Consumer electronics

Single-channel gate driver IC with magnetic isolation, 2 part numbers under the driver IC section. Rated for 600 V and 1200 V bus levels, it drives both IGBT and SiC power switches in industrial inverters.

Model: BF1181C / BF1182, 2 variants; Package: SOW16; Desaturation threshold: 12 V; Primary-side UVLO/recovery: 13 V; Secondary-side UVLO/recovery: 100 V; CMTI: >100 V/ns; Source current: 8 A; Sink current: 8 A

• IGBT gate driving
• SiC gate driving
• Industrial frequency conversion

Dual-channel gate driver IC with capacitive isolation, 5 part numbers under the driver IC section. Compatible with 600 V and 1200 V IGBT and SiC power devices for industrial inverter stages.

Model: BF1186 family, 5 variants; Package: SOW16 / SOW18; VVDDA/B off: 7 V / 12 V; VVDDA/B on: 8 V / 13 V; CMTI: >100 V/ns; Source current: 4 A / 10 A; Sink current: 6 A / 10 A

• IGBT gate driving
• SiC gate driving
• Industrial frequency conversion

DC-DC type LED driver chip for lighting and backlight, 1 part number under the driver IC section. Spread-spectrum operation and wide dimming range suit both lighting fixtures and display backlights.

Model: BF1061; Package: TSSOP14 (EP); Recommended input voltage: 8-40 V; Operating frequency range: 100-500 kHz; Max duty cycle: 91%; Built-in spread-spectrum frequency: 7 kHz; Shutdown current: <=12 uA; Dimming ratio: 1/1000

• LED lighting driver
• Backlight driving

First-generation DC-DC boost converter chip, 1 part number under the DC-DC section. It steps up battery voltage for portable and consumer electronics power rails.

Model: BF1231; Quiescent consumption: 1.25 mA; UVLO voltage: 3.3 V; FB reference voltage: 1.26 V; Current-sense threshold VSEN: 160 mV; FA pin voltage: 4.12 V; SD on-voltage: 0.48 V; SD off-voltage: 0.55 V

• Consumer electronics
• Portable device power

Second-generation DC-DC boost converter chip, 1 part number under the DC-DC section. Efficiency and integration are further improved with wide input range and programmable soft-start.

Model: BF1232; Package: WSON12; VFB: 1 V; VIN: 3.5-45 V; FSW: 100 kHz-1.75 MHz; PGOOD: yes; Adjustable soft-start time: yes; Operating temperature: -40 to 125 °C

• Consumer electronics
• Portable device power

Operational amplifier IC series, 1 part number under the amplifier section. General-purpose op-amp for signal amplification and conditioning in sensing and current-sense paths.

Model: BF1902; Package: SOP8; Vos Typ: ±500 uV; Vos Max: ±1 mV; SR: 5 V/us; GBW: 6 MHz; IO: 100 mA; Ta: -40 to 125 °C

• Signal conditioning
• Current sensing
• Sensor front end

Single-cell battery protection solution combining the BM11X protection IC with a discrete protection MOSFET, 27 part numbers under the protection IC section. Flexible overcharge, overdischarge and overcurrent thresholds cover diverse consumer cells.

Model: BM112 / BM115 / BM117 series, 27 variants; Normal current Typ: 1.5-4 uA; Overdischarge current Max: 0.05-2 uA; Overcharge detection voltage: 4.175-4.575 V; Overdischarge detection voltage: 2.41-2.9 V; Discharge overcurrent detection voltage 1: 0.025-0.2 V; Charge overcurrent detection voltage: -0.145 to -0.025 V; Short-circuit detection voltage: 0.075-0.8 V

• Single-cell lithium battery protection
• Consumer electronics

Single-cell protection chip family with integrated current-sense resistor, 26 part numbers under the protection IC section. The built-in resistor saves board space in TWS earphones, wearables and small packs.

Model: BM114-DE6 / DE6A / DE6C series, 26 variants; Normal current Typ: 2 uA; Overdischarge current Max: 0.5 uA; Overcharge detection voltage: 4.425-4.625 V; Overdischarge detection voltage: 2.1-2.5 V; Discharge overcurrent detection voltage 1: 10.5-35 mV; Charge overcurrent detection voltage: -33 to -15 mV; Discharge overcurrent detection voltage 2: 15 / 16.5 / 30 mV

• Single-cell lithium battery protection
• TWS earphones
• Wearables

Single-cell 2-in-1 protection chips integrating the protection IC and MOSFET in one package, 79 part numbers under the protection IC section. The BM19X family spans multiple current and threshold options for consumer cells.

Model: BM187 / BM191 / BM192 / BM195 / BM197 / BM198 / BM199 subseries, 79 variants; Normal current Typ: 0.5-4 uA; Overdischarge current Max: 0.05-3 uA; Overcharge detection voltage: 4.225-4.555 V; Overdischarge detection voltage: 2.3-3.03 V; Discharge overcurrent detection voltage: 0.025-0.2 V; Charge overcurrent detection voltage: -0.465 to -0.025 V; Rss(on) @3.8 V: 15.5-65 mohm

• Single-cell lithium battery protection
• Consumer electronics

Single-cell 2-in-1 protection chips in ultra-small DFN packages, 2 part numbers under the protection IC section. The ultra-low-power BM197/BM198 solutions suit compact and long-standby consumer devices.

Model: BM197-DE / BM198-DE series; Package: DFN2x2-6LT / DFN1.5x2.0-6L; Package size (mm): 2.00x2.00x0.50 / 1.50x2.00x0.55; Rss(on) @3.8 V: 60 mohm / 45 mohm; Special function: self-recovery on light-load overcurrent; Power consumption: normal 3.5 uA max, sleep 500 nA max / normal 2.5 uA max, sleep 50 nA max

• Single-cell lithium battery protection
• Ultra-compact designs

Dedicated two-cell battery protection IC, 9 part numbers under the protection IC section. Optional sleep recovery and low-voltage charging allowance extend applicability across two-cell consumer packs.

Model: BM210 family, 9 variants; Key features: two-cell protection, optional sleep recovery, low-voltage charging allowed; Overdischarge threshold: 3.65-4.475 V / 2.25-4.475 V; Charge overcurrent threshold: 0.15-0.2 V / -0.2 to -0.15 V; Overdischarge protection delay: 1 s; Charge overcurrent protection delay: 10 ms

• Two-cell battery protection
• Consumer electronics

Multi-cell battery protection IC with selectable 3, 4 or 5-cell configuration, 19 part numbers under the protection IC section. Balancing options, multi-chip cascading and wire-break protection serve power tools and storage batteries.

Model: BM3451 family, 19 variants; Key features: 3/4/5-cell selectable, optional balancing, multi-chip cascading, wire-break protection; Normal current Typ: 25 uA; Sleep current Typ: 5 uA; Overcharge detection voltage: 3.65-4.425 V; Overcharge release voltage: 3.55-4.3 V; Overdischarge detection voltage: 2-2.85 V; Overdischarge release voltage: 2.5-3 V; Discharge overcurrent detection voltage 1: 0.1 V

• Multi-cell battery pack protection
• Power tools
• Energy storage

Dedicated four-cell protection IC in the T16 package, 8 part numbers under the protection IC section. Fixed 4-cell configuration without balancing keeps the design simple for power tool packs.

Model: BM3451 T16A variants, 8 variants; Key features: 4-cell protection without balancing; Normal current Typ: 25 uA; Sleep current Typ: 5 uA; Overcharge detection voltage: 3.65-4.3 V; Overcharge release voltage: 3.55-4.18 V; Overdischarge detection voltage: 2.35-2.8 V; Overdischarge release voltage: 2.55-3 V; Discharge overcurrent detection voltage 1: 0.05-0.1 V

• Four-cell battery pack protection
• Power tools

Dedicated three-cell protection chip for lithium and LiFePO4 batteries, 5 part numbers under the protection IC section. Added temperature protection makes it fit small energy storage units.

Model: BM301 family, 5 variants; Key features: 3-cell protection with temperature protection; Normal current Typ: 12 uA; Sleep current Typ: 5 uA; Overcharge detection voltage: 3.65-4.25 V; Overcharge release voltage: 3.45-4.13 V; Overdischarge detection voltage: 2.13-2.8 V; Overdischarge release voltage: 2.41-3 V; Discharge overcurrent detection voltage 1: 0.1 V

• Three-cell battery pack protection
• Small energy storage

Dedicated 4, 5 and 6-cell protection IC series, 31 part numbers under the protection IC section. Low-temperature protection and discharge-state identification strengthen battery pack safety in tools and storage systems.

Model: BM3540 / BM3550 / BM3560 / BM3560-D series, 31 variants; Key features: 4/5/6-cell protection with low-temperature or temperature protection and discharge-state identification; Normal current Typ: 20 uA; Sleep current Typ: 5 uA; Overcharge detection voltage: 3.65-4.35 V; Overcharge release voltage: 3.45-4.23 V; Overdischarge detection voltage: 2-2.8 V; Overdischarge release voltage: 2.41-3 V; Discharge overcurrent detection voltage 1: 0.05-0.1 V

• Multi-cell battery pack protection
• Power tools
• Energy storage

Selectable 3, 4 or 5-cell protection IC, 14 part numbers under the protection IC section. Low-temperature protection, discharge-state identification and multi-chip cascading serve tool and storage packs.

Model: BM3551 / BM3551-D family, 14 variants; Key features: 3/4/5-cell selectable with low-temperature protection, discharge-state identification and multi-chip cascading; Normal current Typ: 20 uA; Sleep current Typ: 5 uA; Overcharge detection voltage: 3.65-4.35 V; Overcharge release voltage: 3.5-4.23 V; Overdischarge detection voltage: 2-2.8 V; Overdischarge release voltage: 2.5-3 V; Discharge overcurrent detection voltage 1: 0.1 V

• Multi-cell battery pack protection
• Power tools

Protection IC series covering 6-10-cell and 11-15-cell battery packs, 6 part numbers under the protection IC section. Low-temperature protection and discharge-state identification support storage and light electric mobility batteries.

Model: BM6101 / BM1015 L32/L48 variants, 6 variants; Key features: 6-10-cell or 11-15-cell selectable with low-temperature protection and discharge-state identification; Normal current Typ: 20 uA; Sleep current Typ: 5 uA; Overcharge detection voltage: 3.65-4.25 V; Overcharge release voltage: 3.45-4.13 V; Overdischarge detection voltage: 2.13-2.8 V; Overdischarge release voltage: 2.41-3 V; Discharge overcurrent detection voltage 1: 0.1 V

• High-series-count battery pack protection
• Energy storage
• Light electric mobility

Selectable protection IC series for 2-5, 6-10 and 11-15-cell lithium and LiFePO4 packs, 18 part numbers under the protection IC section. Built-in 1-4 s selectable delay and multi-chip cascading fit storage and power tool packs.

Model: BM3051 / BM6051 / BM1051 series, 18 variants; Key features: built-in delay selectable 1-4 s, multi-chip cascading; Overcharge protection voltage: 4.350 V / 3.800 V / 3.950 V; Overcharge hysteresis: 0.360 V / 0.200 V / 0.100 V; Overcharge protection delay: 2 s / 4 s / 1 s; Package: TSSOP28 / DFN-8L / MSOP8; CO output: CMOS dynamic H

• Multi-cell battery pack protection
• Energy storage
• Power tools

Selectable 2-5 cell protection IC series, 17 part numbers under the protection IC section. Built-in 1-4 s selectable delay, cascading and wire-break protection fit tool packs with different CO output options.

Model: BM3051 M8 series, 17 variants; Key features: 2-5-cell selectable, built-in delay 1-4 s optional, cascading and wire-break protection; Normal current Typ: 1.5 uA; Overcharge detection voltage: 4.200 V / 4.175 V / 4.225 V; Overcharge release offset: 0.050 V / 0.100 V / 0.200 V; Overcharge protection delay: 1 s / 2 s / 4 s; CO output: CMOS dynamic H / N-channel open-drain dynamic L

• 2-5 cell battery pack protection
• Power tools

BM199 series battery secondary protection chip, 1 part number under the protection IC section. It adds an independent overcharge protection layer with shipping mode for safer pack storage and transport.

Model: BM199 series; Package: DFN1x1-4L; Overcharge protection voltage VOVP: 4.475 V; Overcharge protection delay TOVP: 1 s; CO output: CMOS active H; Power consumption: 0.5 uA; Special function: shipping mode

• Secondary protection
• Battery pack safety

Secondary protection chip of the BM3051X family for 2-5-cell lithium and LiFePO4 packs, 2 part numbers under the protection IC section. It serves as the independent second overcharge guard with wire-break monitoring.

Model: BM3051HAA-M8D / M8E, 2 variants; Overcharge protection voltage VOVP: 4.200 V; Hysteresis VHYS: 0.050 V; Overcharge protection delay TOVP: 1 s; Package: MSOP8; CO output: CMOS dynamic H / N-channel open-drain dynamic L; Wire-break protection: yes

• 2-5 cell secondary protection
• Battery pack safety

Secondary protection chip of the BM3051X family for 2-5-cell lithium and LiFePO4 packs, 1 part number under the protection IC section. DFN2x2-8 package suits compact pack boards needing an independent overcharge guard.

Model: BM3051OCB-D8A; Package: DFN2x2-8; Ground current Ignd: 1.5 uA / 5 uA; VOVP: 4.350 V ±25 mV; VHYS: 0.200 V ±50 mV; TOVP: 2 s ±0.6 s; CO output: CMOS active H

• 2-5 cell secondary protection
• Battery pack safety

Secondary protection chip of the BM3051X family for 11-15-cell lithium and LiFePO4 packs, 1 part number under the protection IC section. The TSSOP28 device guards large storage and light-mobility packs against overcharge.

Model: BM1051ODB-T28A; Package: TSSOP28; Ground current Ignd: 1.5 uA / 5 uA; VOVP: 4.350 V ±25 mV; VHYS: 0.360 V ±50 mV; TOVP: 2 s ±0.6 s; CO output: CMOS active H

• 11-15 cell secondary protection
• Energy storage
• Light electric mobility

Single-channel analog front-end (AFE) battery management chip, 1 part number under the battery management IC section. It acquires and monitors battery voltage with automotive-qualified reliability.

Model: BF8920A; Operating voltage: 3.6-5.5 V; Communication: 1 Mbps daisy-chain SPI and standard SPI; QC grade: AEC-Q100 Grade 1, -40 to 125 °C; Package: TSSOP16

• Industrial battery management
• Automotive battery management

16-channel analog front-end chip, 2 part numbers under the battery management IC section. It provides high-accuracy voltage and temperature acquisition with balancing support and cascaded communication for automotive and industrial BMS.

Model: BF8915A-1 / BF8915B-1, 2 variants; Voltage sensing channels: 16; Temperature sampling channels: 8; Acquisition accuracy: <=±3 mV @3.3 V & 25 °C, <=±5 mV @-40 to 85 °C / <=±2 mV @(1.5-4.5 V) & 25 °C; Operating voltage: 16-100 V; Balancing: internal and external; Communication: 1 Mbps daisy-chain SPI and standard SPI; Package: HLQFP64

• Automotive BMS
• Industrial energy storage BMS

4-channel analog front-end battery management chip, 1 part number under the battery management IC section. It combines voltage, current and temperature acquisition with hardware overcurrent protection and high-side NMOS drive in one device.

Model: BF8410A; Voltage sensing: 4 channels, 16-bit ADC, <=±2 mV @(1.5-4.5 V) & 25 °C; Current sensing: 1 channel, 16-bit ADC, <=±0.3% @(-100 to +100 mV); Balancing: internal and external @50 mA & 40 ohm & 4.2 V; Overcurrent protection: hardware, -200 to +200 mV; High-side NMOS drivers: 3 channels @4 mA with built-in charge pump; Communication: 1 CAN FD transceiver, 1 2 Mbps standard SPI; Package: HLQFP64

• Industrial battery management
• Small battery packs

Smart management chip for 12 V battery packs, 1 part number under the battery management IC section. Sensing, protection and an Arm Cortex-M0+ subsystem with CAN FD bridge the pack to the vehicle network.

Model: BF8411A; Voltage sensing: 4 channels, 16-bit ADC, <=±2 mV @(1.5-4.5 V) & 25 °C; Current sensing: 1 channel, 16-bit ADC, <=±0.3% @(-100 to +100 mV); Balancing: internal and external @50 mA & 40 ohm & 4.2 V; Overcurrent protection: hardware, -200 to +200 mV; High-side NMOS drivers: 3 channels @4 mA with charge pump; System: Arm Cortex-M0+, P-Flash 96K, D-Flash 2K; Communication: 1 CAN FD transceiver and controller, 1 SCI (LIN/UART); Package: HLQFP64

• 12 V lithium battery packs
• Automotive low-voltage power

Automotive-grade current and voltage sensors based on fluxgate or Hall principles, 10 part numbers under the smart sensor section. They deliver accurate current detection for NEV electronic control and on-board power systems.

Model: BCD/BCF3/BCT1/BCX/BSA/BST series, 10 variants; Current measurement range: ±300 A & ±600 A / ±300 A / ±150 A & ±300 A & ±500 A; Bandwidth: 40 kHz / 100 kHz / 25 kHz @-3 dB; Linearity: <=±0.5% / <=±0.1% / <=±1%; Accuracy: <=±1% / <=±0.5%; Operating temperature: -40 to +125 °C / -40 to +105 °C / -40 to +85 °C; Response time: <6 us / <1 us / <8 us

• New energy vehicles
• On-board charging
• Motor controllers
• Photovoltaics

Industrial-grade current and voltage sensor series from BYD Semiconductor, offering 10 models for precise current detection in industrial drives, inverters and power supply systems. The family covers a wide span of measuring ranges, bandwidths and accuracy classes to match different converter topologies.

Measuring current range: ±500A / ±25A~±50A / ±1500A; Bandwidth: 100kHz@-3dB / 120kHz@-3dB / 150kHz@-3dB; Linearity: ≤±0.1% / ≤±0.5% / ≤±1%; Accuracy: ≤±0.4% / ≤±1% / ≤±0.3%; Operating temperature: -25~+70°C / -40~+105°C / -40~+85°C; Response time: <1μs / <3μs / <10μs

• Industrial frequency conversion
• Photovoltaic inverters
• Energy storage
• Welding machines

Temperature sensor series for battery and electric drive systems, listed with 4 models. NTC-based devices deliver stable resistance characteristics and fast thermal response for battery pack, motor and HVAC monitoring.

B-value: 3485K±1% / 4390K±2% / 3485K±2%; Resistance at 150°C: 1.998kΩ±1% / 1.196kΩ±3% / 1.908~2.091kΩ; Response time: <10s / <5s; Operating temperature: -40~140°C / -40~200°C / 80~110°C

• Automotive electronics
• Industrial temperature measurement

Pressure sensor series covering 5 models for gas and liquid pressure detection. Devices combine high burst-pressure margins with millisecond response for transmission, fuel tank and process monitoring duties.

Working pressure: 0~250MPaG / 0.1~2MPaA / -20~50KPaA; Burst pressure: 40MpaG / 6MpaA / 310KpaA; Accuracy: ±2.2% / ±2% / ±2.5%; Response time: <10ms / <1ms; Operating temperature: -40~125°C / -40~140°C / -40~85°C

• Automotive electronics
• Industrial process control

Combined temperature and pressure sensor in a single packaged unit, listed with 1 model. Designed for automotive air-conditioning systems that require simultaneous pressure and refrigerant temperature monitoring.

Working pressure: 3518Kpa; Burst pressure: 7000KpaA; Pressure accuracy: ±2%; Temperature accuracy: ±3%; Response time: <10ms; Operating temperature: -30~130°C

• Automotive electronics
• Air conditioning system

Integrated sensor module series with 2 models, combining gearbox gear-position and speed sensing in one packaged unit for automotive transmission control.

Input voltage: 5±0.5V; PWM frequency: (1000±10%)HZ; Linearity: ≤±3%; Operating temperature: -40~+150°C; Temperature drift: ≤±2%

• Automotive electronics
• Industrial detection

Bare sensing-element series with 9 models, covering position, speed and steering-angle detection. These discrete sensing cores serve as building blocks for sensor integration and module manufacturing.

Input voltage: 5±0.5V / 15±0.5V / 14V; Accuracy: ≤±0.4% / ≤±1% / ≤±3%; Operating temperature: -40~+125°C / -25~+70°C / -40~+80°C

• Sensor integration
• Module manufacturing

Consumer-grade CMOS image sensor chips with 5 models, spanning 0.3MP to 5MP resolutions on compact optical formats. Suited to mobile phones, tablets and wearable devices via DVP or MIPI interfaces.

Product series: 5MP / 2MP / 0.3MP; Optical format: 1/5 / 1/10 / 1/15; Pixel size (μm): 1.12×1.12 / 1.75×1.75 / 2.25×2.25; Data interface: DVP MIPI / MIPI / DVP, SPI; Output format: RAW / YUV, RAW; Application: mobile phones, MID / smart wearables

• Mobile phones
• Tablets
• Consumer electronics

CMOS image sensors for security surveillance and automotive imaging, with 8 models covering 1080P to 4K. Deployed in HD IP cameras, dash cameras, and license-plate and face recognition systems.

Product series: security digital output 1080P (2MP) / 960P (1.3MP) / 720P (1MP); Optical format: 1/2.7 / 1/3 / 1/3.8; Pixel size (μm): 3.0×3.0 / 2.7×2.7 / 2.9×2.9 BSI; Data interface: DVP MIPI / DVP / CVBS; Output format: RAW / YUV / CCIR656; Application: HD IP camera, dash cam, plate & face recognition / 360° surround camera / front-mounted vehicle camera

• HD IP camera
• Dash camera
• License plate & face recognition
• Automotive imaging

Capacitive fingerprint recognition module series with 3 models in round and square form factors, with or without indicator lighting. Designed for smart door locks, identity verification and mobile devices.

Pixel matrix: 160*160; Module type: round without LED / round with LED / square with LED; Typical application: smart door locks and similar products; Power consumption: 7uA@5HZ

• Mobile phones
• Fingerprint door lock
• Identity verification

Capacitive fingerprint sensor chip family with 5 models and pixel arrays up to 256*360. LGA-packaged dies serve luggage locks, drawer locks, safes, smart door locks and institutional identification terminals.

Sensor pixel array: 96*96 / 160*160 / 256*360; LGA package die size (mm): rect. 10*10~11.5*11.5, round Ф10~Ф11.5 / rect. 10.4*10.4~14.3*13.6, round Ф12.8~Ф13.6 / round Ф12.8~Ф16.2; Typical application: luggage locks, drawer locks, safes, padlocks / smart door locks / banking, customs, public security; Power consumption: 10uA@7HZ / 120uA@20HZ

• Mobile phones
• Fingerprint door lock

Multi-sensing fingerprint chip BF5622A integrating the sensor array and control logic, housed in a 32-pin package with 2M flash. The -40 to +125°C operating range suits demanding lock and terminal designs.

Package interface: 32pin; Memory: 2M flash; Operating temperature: -40~+125°C

• Fingerprint identification terminals

Fingerprint multi-sensing chip BF5623A in a 32-pin package with 512K flash, a cost-optimized member of the family for fingerprint terminals. Full functionality is retained across the -40 to +125°C range.

Package interface: 32pin; Memory: 512K flash; Operating temperature: -40~+125°C

• Fingerprint identification terminals

Lock-control MCUs for biometric smart locks, offered in 3 models around an 8051 or Cortex-M0 core with up to 128K flash. Integrated UART, SPI and IIC interfaces connect fingerprint sensors, motor drivers and communication modules.

Operating voltage: analog 2.7~5.5V, digital 1.8~5.5V / analog 2.5~5.5V, digital 2.5~5.5V; Core: 8051 / Cortex-M0; Flash: 59K / 63K / 128K Bytes; EEPROM: 4K / 1K / -; SRAM: 256+4K / 8K Bytes; UART: 2 channels / 5 channels; SPI: 1 channel / 2 channels; IIC: 1 channel

• Smart door lock
• Biometric terminal

Fingerprint MCU integrating recognition control on a 32-bit core running at 168MHz, with 2M flash and 128K SRAM. A single-chip solution for smart locks and fingerprint terminals.

Operating voltage: 2.6~3.6V; Operating frequency: 168MHz; Core: 32-bit; Flash: 2M Bytes; SRAM: 128K Bytes; UART: 2 channels (2 port mappings each); SPI: 2 channels; IIC: 1 channel

• Smart door lock
• Fingerprint terminal

Biometric fingerprint module series with 4 models combining sensor, DSP and dual-mode algorithm. Recognition rates above 95% with a false-acceptance rate below 1/100000 make it fit for smart locks and terminals.

Form: with LED ring / without LED; Sensor pixels: 108~160; DSP flash: 2M; Algorithm: dual-mode algorithm; False acceptance rate: <1/100000; Recognition rate: >95% / >98.5% / >96.5%

• Smart door lock
• Fingerprint terminal

Fingerprint recognition chips for biometric applications, listed in 4 models with pixel matrices from 96 to 160. Round and rectangular LGA dies are offered, pin-to-pin compatible with the BF5835R-S.

Sensor pixel matrix: 96~160; LGA package die size (mm): round Ф10~Ф11.5, rect. max 10*10 / round Ф12.8~Ф13.6, rect. max 14.3*13.6 / round Ф12.8~Ф16.2; Note: pin-to-pin compatible with BF5835R-S

• Smart door lock
• Fingerprint terminal

Face recognition chip BF6068S with stereo dual-camera support, delivering liveness detection rates above 98%. Targeted at face-recognition door locks and anti-spoofing terminals.

Form: dual-camera single board; Liveness detection rate: >98% @ FAR 1/100000; Face recognition rate: >98% @ FAR 1/1000000

• Face recognition door lock
• Liveness detection

2016 series LED light sources for automotive lamps, winner of the 2018 GALED Golden Ball Award and Guangdong high-tech product certification. Eight models in white, yellow and red cover daytime running, reading, turn-signal and brake lighting.

Color: white / yellow / red; Application: DRL, reading lamp / turn signal / brake lamp; Photoelectric parameter: 250~1200; Photoelectric parameter: 150~1000; Photoelectric parameter: 2~3.3; Photoelectric parameter: 16~320; Photoelectric parameter: 0.323/0.323 / 0.57/0.42 / 620; Photoelectric parameter: 150

• Automotive headlamps
• Vehicle lighting

Headlamp LED light source family with 3 models for high and low beam, honored with the 2019 GALED Golden Ball Award and Guangdong high-tech product certification. It delivers bright, precisely focused forward illumination.

Color: white; Application: high/low beam; Photoelectric parameter: 1200~1500; Photoelectric parameter: 1000; Photoelectric parameter: 6.4~12.8; Photoelectric parameter: 660~1320; Photoelectric parameter: 0.325/0.335; Photoelectric parameter: 150

• High/low beam headlamps
• Vehicle lighting

3528 package LED light source series with 3 models in white, Iceland blue and red. Used for position lamps, interior lighting, ambient lighting, display backlighting and brake lamps.

Color: white / Iceland blue / red; Application: position/interior lamp / ambient lamp, backlight / position, brake lamp; Photoelectric parameter: 40~50; Photoelectric parameter: 20; Photoelectric parameter: 2~2.9; Photoelectric parameter: 1100~1500; Photoelectric parameter: 0.31/0.31 / 0.19/0.28 / 620; Photoelectric parameter: 125

• Vehicle lamps
• Indicator lighting

2835 package LED light source range with 7 models in red, yellow and white. Serves brake lamps, turn signals and position lamps with a broad span of photoelectric ratings.

Color: red / yellow / white; Application: brake lamp / turn signal / position, brake lamp; Photoelectric parameter: 40~240; Photoelectric parameter: 20~150; Photoelectric parameter: 2.1~3.1; Photoelectric parameter: 6.5~65; Photoelectric parameter: 617 / 590 / 0.31/0.31; Photoelectric parameter: 125

• Vehicle lamps
• Lighting

0603 miniature-package LED light source series with 7 models in Iceland blue, green and yellow-green. Optimized for automotive dashboard and display backlighting.

Color: Iceland blue / green / yellow-green; Application: automotive backlight; Photoelectric parameter: 20; Photoelectric parameter: 5~20; Photoelectric parameter: 2~2.9; Photoelectric parameter: 32~480; Photoelectric parameter: 0.19/0.27 / 522 / 568; Photoelectric parameter: 100~125

• Vehicle lamps
• Indicator lamps

Capacitive Touchkey solution for automotive climate control panels, supplied in 1 model. Operates from a 9-16V supply across -40 to +85°C for reliable in-cabin touch interaction.

Supply voltage: 9-16V; Operating temperature: -40~+85°C

• Automotive climate panel
• Touch interaction

Automotive display series with 2 models, a roof-mounted screen and a transparent screen, both rated for 9-16V supply and -40 to +85°C operation.

Supply voltage: 9-16V; Operating temperature: -40~+85°C

• Automotive display
• Center console display

Automotive night vision system combining near- and far-infrared modules, detecting pedestrians and vehicles through darkness, haze and oncoming glare. Automatic exposure control keeps imaging clear at night, with recognition out to 100 m for pedestrians and 120 m for vehicles.

Supply voltage: 12V (far-IR module) / 9~16V (near-IR module) / 22V×2 (fill light); Resolution: 1280*720P; Field of view: H48*V33 (far-IR) / H46*V27 (near-IR); Detection distance: pedestrians 10~100m / vehicles 15~120m; Detection accuracy: pedestrians ≥95% / vehicles ≥98%; Transmission: LVDS; Distortion: ≤5%; Operating temperature: -40~85°C

• Automotive night vision
• Pedestrian & vehicle detection

In-vehicle PM2.5 detector for real-time monitoring of particulate concentration inside the cabin. The LVDS-linked unit starts in under 5 s and measures 0-999 μg/m³ on a nominal 12V supply.

Supply voltage: nominal 12V (range 9~16V); Operating current: <500mA; Standby current: ≤30μA; Power consumption: 6W; Measuring range: 0-999μg/m³; Dynamic range: <30dB; Startup time: <5s; Transmission: LVDS

• In-cabin air quality monitoring

Stereo front-viewing road preview system that captures road surface information ahead of the vehicle in real time, supporting intelligent driving and predictive suspension or headlamp control.

Supply voltage: 12V; Resolution: 1920×1080; Baseline: 160mm; HFOV: 60° (native) / >50° (corrected); Shutter type: rolling shutter; Dynamic range: 120dB; Depth of field: 1.5m~∞; Connector: FAKRA Z

• Intelligent driving
• Suspension & headlamp preview

Streaming media interior mirror delivering 1080P full-HD rearview imaging with a wide field of view and 120dB dynamic range, replacing conventional glass mirrors.

Supply voltage: 9-16V; Resolution: 1920*1080 (1080P); Frame rate: 30fps; Field of view: HFOV >80°; Dynamic range: ≥120dB; Startup time: <50ms; Transmission: LVDS; Connector: FAKRA

• Automotive rearview imaging

AR-HUD picture generation unit (PGU) built on an LCOS image source chip, projecting 1080P imagery at 90 lm for automotive head-up displays.

Image source chip: LCOS; Exit angle: 20*15°; Projection brightness: 90lm; Throw ratio: 1.6; Resolution: 1920*1080; Uniformity: 80%; Color gamut (NTSC 1931): ≥80%; Offset: 100%

• AR-HUD head-up display

MEMS silicon microphone series with 4 models for smartphone and headset ENC/ANC as well as in-car voice pickup. Packages down to 2.75×1.85×0.90 mm with SNR up to 65 dB and AOP up to 128 dBSPL.

Application field: smartphones, headset ENC/ANC / headset ENC / smart home and automotive calls, ENC, ANC; Package (mm): 2.75×1.85×0.90 / 3.50×2.65×0.98; Sensitivity (dBV): -38~-26; SNR (dB): 62~65; Frequency response (Hz): 50-10000 / 20-10000; AOP (dBSPL): 120~128; Operating voltage (V): 2.0 normal mode / 2.7 high-range mode / 2.0 / 1.8

• Smartphone/headset ENC/ANC
• Automotive voice

MEMS airflow sensor for airflow-triggered detection, listing 1 model with a trigger threshold of -300 to -100 Pa. The compact 2.75×1.85×0.90 mm package draws only 3~5 μA of quiescent current.

Application field: e-cigarettes; Package (mm): 2.75×1.85×0.90; Trigger threshold (Pa): -300~-100; Quiescent current (μA): 3~5; Operating voltage (V): 2.4~5.5

• E-cigarettes
• Airflow detection

Automotive fragrance control module JG-HC-XF communicating over LIN, with POGO PIN contact IIC scent identification, OTA upgrade support and large-screen or voice control.

Minimum input voltage: 9V; Maximum input voltage: 16V; Rated voltage: 12V; Rated current: <300mA; Communication: LIN; Identification: POGO PIN contact, IIC; Upgrade: OTA supported; Static average current: ≤0.1mA

• Automotive fragrance system

Automotive fragrance module JG-JKX1-XF using CAN communication and NFC-based scent identification, operable via large screen, voice or remote app; noise stays at or below 32 dB at 50 cm.

Minimum input voltage: 9V; Maximum input voltage: 16V; Rated voltage: 12V; Rated current: <300mA; Communication: CAN; Identification: NFC; Static average current: ≤0.1mA; Noise: ≤32dB (at 50cm)

• Automotive fragrance system

1-megapixel high-definition surround-view camera module for 360-degree parking systems, outputting YUV422 over LVDS at 30 fps with an RGGB color filter array.

Supply voltage: DC5~12V; Operating current: <150mA@9V; Resolution: 1280×960 (1MP); Frame rate: 30fps; Image format: YUV422; Startup time: ≤300ms; CFA (color filter array): RGGB; Transmission: LVDS

• 360 surround view
• Automotive imaging

2- and 3-megapixel surround-view modules with functional safety support, delivering 1920×1200 or 1920×1536 imagery at 30 fps over LVDS for safety-relevant parking and maneuvering.

Supply voltage: DC5~12V; Operating current: <100mA@11V; Resolution: 1920×1200 / 1920×1536; Frame rate: 30fps; Image format: YUV422; Startup time: ≤300ms; CFA (color filter array): RGGB; Transmission: LVDS

• 360 surround view
• Functional-safety imaging

2- and 3-megapixel ADAS modules for side and rear perception, outputting RAW12 over LVDS at 30 fps from a 9-16V rail for blind-zone and trailing-vehicle monitoring.

Supply voltage: DC9~16V; Operating current: <120mA@11V; Resolution: 920×1200 / 1920×1536; Frame rate: 30fps; Image format: RAW12; Startup time: ≤300ms; CFA (color filter array): RGGB; Transmission: LVDS

• ADAS side/rear perception

8-megapixel front stereo ADAS module mounted at the vehicle nose, streaming 3840*2160 RAW12 imagery to the domain controller to assist driving and parking.

Supply voltage: DC9~16V; Operating current: <200mA@11V; Resolution: 3840*2160; Frame rate: 30fps; Image format: RAW12; Startup time: ≤300ms; CFA (color filter array): RGGB; Transmission: LVDS

• ADAS front perception
• Assisted driving & parking

Wide-angle camera module feeding streaming media rearview mirrors, capturing 1920×384 imagery at 60 fps over LVDS.

Supply voltage: DC5~12V; Operating current: <150mA@9V; Resolution: 1920×384; Frame rate: 60fps; Image format: YUV422; Startup time: <300ms; CFA (color filter array): RGGB; Transmission: LVDS

• Streaming media rearview mirror

Scanner module CSM3112 for 1D and 2D code reading, built around an OV09281 global-shutter sensor with laser aiming and white LED illumination over a 6-80 cm scan range.

Image sensor: OV09281; Maximum resolution: 1280*800; Sensor device: 1/4" global shutter sensor; Lens: 3G+IR FNO=5.95; Aiming aid: laser, wavelength 650nm, power <5mV; Illumination aid: LED, white 5000K, 80-100Lm@350mA; Frame rate: 30fps@1280*800; Scan range: 6cm~80cm

• Code scanning devices
• Identification terminals

In-cabin video module for driver and occupant monitoring, pairing a CL220 lens with 144° FOV optics and delivering 1280H×720V at 30 fps with ≥85dB dynamic range.

Supply voltage: 8V DC from host device (operates 6~12V); Operating current: <150mA; Resolution: center ≥500 Lp/mm, corners ≥350 Lp/mm; Effective pixels: 1280H×720V; Frame rate: 30fps; Lens: CL220; Field of view: FOV 144±3°, HFOV 144°; Dynamic range: ≥85dB

• In-cabin monitoring
• DMS

1080P dash camera module with a 1/2.7-inch sensor and 120dB dynamic range, recording forward road scenes at 30 fps on a 9-16V supply.

Supply voltage: 9-16V; Operating current: <1A; Sensor optical size: 1/2.7 inch; Resolution: 1080P; Frame rate: 30fps; Field of view: HFOV 120°, VFOV 60°; Dynamic range: 120dB; ISP: FH8322

• Dash camera

Integrated in-vehicle imaging system combining a head unit and camera modules. One platform covers driver monitoring and authentication, gesture control, left-object detection, rear occupant monitoring, dash recording, 360-degree surround view and 24-hour vehicle surveillance.

Driver state monitoring: fatigue, distraction and dangerous-behavior detection; Driver authentication: FaceID with multi-user profiles after boarding; Gesture recognition: 3+X gestures for media volume, rear monitoring and trip photo; Left-object alert: reminders after power-off, pushed to owner app; Rear occupant monitoring: rear video view via IVI for children and pets; Dash recording: forward scene recording with in-cabin audio and emergency clips; 360 surround view: 4 HD modules stitched for surround display; 24-hour surveillance: perimeter watch after locking against scratches, collisions and theft

• Driver monitoring
• 360 surround view
• Dash recording
• Occupant monitoring

1-megapixel infrared DMS module with 940nm LED illumination, using global-shutter 1280*800 imaging at 30 fps for driver state monitoring.

Supply voltage: 6-12V; Effective pixels: 1280*800; Exposure method: global shutter; Resolution: 720P; Frame rate: 30fps; Field of view: HFOV 66°, VFOV 51°; ISP: 2650; LED: 940nm, 3W, 90°

• Driver state monitoring (DMS)

Dual-channel RGB+IR DMS module combining visible and 940nm infrared imaging, with 1936*1188 effective pixels and rolling-shutter exposure for driver monitoring.

Supply voltage: 6-12V; Effective pixels: 1936*1188; Exposure method: rolling shutter; Resolution: 1080P; Frame rate: 30fps; Field of view: FOV 74°, HFOV 60°, VFOV 36°; LED: 940nm, 3W, 120°; Number of LEDs: 2

• Driver state monitoring (DMS)

2-megapixel functional-safety DMS module with global-shutter 1600*1300 imaging and GW5200 ISP, delivering 1080P at 30 fps for safety-relevant driver monitoring.

Supply voltage: 6-12V; Effective pixels: 1600*1300; Resolution: 1080P; Frame rate: 30fps; Field of view: HFOV 60°, VFOV 40°; Dynamic range: 68dB (GS); ISP: GW5200; LED: 940nm, 1W

• Driver state monitoring (DMS)

MPC automotive camera module with MIPI/RAW output and 120dB HDR, capturing 1824H*940V at up to 60 fps from a 1.8V/3.3V supply for machine-vision tasks.

Supply voltage: 1.8V/3.3V DC; Rated power: ≤1.5W; Resolution: 1824H*940V@60fps; Pixel size: 4.2um; Maximum frame rate: 60FPS; Data format: MIPI/RAW; HDR: up to 120dB; Operating temperature: -40~85°C

• Automotive imaging
• Machine vision

Fine-pitch Meiying series LED displays for indoor close-viewing, offered in pitches from M2.5 down to M0.9 for conference and control-room video walls.

Supply voltage: 9-16V; Operating temperature: -40~+85°C

• Indoor fine-pitch display
• Meeting-room display

Indoor Xuancai series LED display in X4.0 and X3.0 pitches for general indoor video wall applications.

Supply voltage: 9-16V; Operating temperature: -40~+85°C

• Indoor display

Indoor Huguang series LED display covering pitches A1.2 to A4.0 for conference rooms, showrooms and other interior installations.

Supply voltage: 9-16V; Operating temperature: -40~+85°C

• Indoor display

Outdoor Fuguang series LED display spanning pitches S2.5 to S10.0 for advertising screens, facades and outdoor information displays.

Supply voltage: 9-16V; Operating temperature: -40~+85°C

• Outdoor display

LED display screens for advertising machines, with outdoor model GGJ002-P2.5 and indoor model GGJ001-P2.5 for commercial signage installations.

Supply voltage: 9-16V; Operating temperature: -40~+85°C

• Advertising machine
• Commercial display

LED ceiling light family with 4 CL-series models rated for a 9-16V supply and -40 to +85°C operation, serving home and commercial lighting.

Supply voltage: 9-16V; Operating temperature: -40~+85°C

• Home lighting
• Commercial lighting

IGBT wafer foundry service with multiple process platforms, offering voltage classes from 600V to 1200V and customer-specified current ratings for power device manufacturing.

VCES (V): 600~1200; IC (A): customer specified; VGES (V): ±20; VCE(sat) (V): customer specified; VGE(th) (V): 5.5~6; ICES (μA): 2; IGES (nA): 200; TJ (°C): 150

• IGBT device manufacturing
• Wafer foundry

Fast-recovery diode (FRD) wafer foundry service covering 200~1200V reverse-voltage platforms, with VF and Trr parameters tuned to customer requirements.

VRRM (V): 200~1200; IF(AV) (A): customer specified; IR (μA): 2; VBR (V)@IR=0.25mA: 300~1380 / 240~1270; TJ (°C): 150; Note: VF/Trr adjustable per customer requirements

• FRD device manufacturing
• Wafer foundry

CMOS process wafer foundry with multiple process platforms from 12V to 40V devices, supporting mixed-voltage options such as 12V/5V.

L (um): 3; S (um): 1.5~3; Vdsmax (V): -40~40; Vgsmax (V): -40~40; Vth (V): -2.5~2.5; Vsnapback (V): >20 / <-20 / <-50; BV (V): >20 / <-20 / <-50; Pitch,Asym (um): 7.2~9.8

• CMOS process manufacturing
• Wafer foundry

Trench Schottky (TMBS) wafer foundry service covering 20~150V platforms on 0.7um process options, with VF and IR tailored to customer requirements.

VRRM (V): 20~150; IF(AV) (A): customer specified; VBR (V)@IR=0.25mA (TYP.): 30~165; VBR (V)@IR=0.25mA (MIN.): 25~155; TJ (°C) (MAX.): 125; Note: VF/IR adjustable per customer requirements

• Schottky device manufacturing
• Wafer foundry

Automotive-grade IGBT power modules covering the 650V-1700V platform range in 34mm and 62mm standard packages. Half-bridge and six-pack topologies serve motor inverters, on-board chargers and auxiliary power conversion in new energy vehicles.

Voltage class VCES: 650~1700V; Current IC: 50~600A; Conduction drop VCE(sat)@25°C: 1.65~2.35V; Topology: half-bridge / six-pack / single switch; Package series: 34mm / 62mm; Quality grade: automotive grade

• NEV traction inverter
• On-board charger (OBC)
• Electric A/C and power steering auxiliaries

SiC MOSFET power modules built on in-house silicon carbide dies, spanning 750~1200V with RDS(on) from 1.7 to 22 mΩ. V305, V205 and MePack2 automotive packages target traction inverters and high-efficiency power conversion.

Voltage class VDSS: 750~1200V; On-resistance RDS(on): 1.7~22mΩ; Current ID: 65~840A; Switching energy Eon/Eoff@25°C: several mJ to tens of mJ; Topology: half-bridge / six-pack; Packages: V305 / V205 / MePack2 automotive platforms

• NEV traction inverter
• On-board charging & DC-DC
• High-efficiency industrial power

Battery management analog front-end (AFE) chips in 16-channel and 4-channel versions, providing high-accuracy cell voltage and temperature acquisition, balancing control and daisy-chain communication for automotive and industrial BMS.

Voltage acquisition channels: 4~16; Temperature sampling channels: up to 8; Acquisition accuracy: ≤±3mV@3.3V&25°C; Operating voltage: 16V~100V; Balancing: internal / external balancing supported; Communication: 1Mbps daisy-chain SPI and standard SPI

• Automotive power battery BMS
• Industrial & storage battery management

Automotive-grade current and voltage sensor family covering current-type and voltage-type devices, delivering isolated, accurate current measurement for traction inverters, on-board chargers and electric compressor drives in new energy vehicles.

Measuring current range: ±300A / ±600A automotive ranges; Bandwidth: 40kHz@-3dB; Linearity: ≤±0.5%; Accuracy: ≤±1%; Operating temperature: -40~+125°C; Response time: <6μs

• NEV traction inverter current detection
• On-board charger (OBC)
• Electric compressor and e-drive auxiliaries