Innuovo Technology Co., Ltd.

Core product category of Innuovo's magnetic materials and devices segment. The official website states that the company's magnetic materials and devices portfolio comprises three major categories, namely sintered NdFeB, bonded NdFeB and magnet assemblies, while also providing one-stop integrated magnetic application services covering product design, manufacturing and product technology; developed and produced by entities such as Zhejiang Innuovo Magnetics Co., Ltd., it ranks among China's leading rare-earth permanent magnet manufacturers.

Three major product lines: sintered NdFeB, bonded NdFeB and magnet assemblies; combined annual output of 6,500 t of sintered and bonded NdFeB magnets; plant site of 160,000 square metres with 90,000 square metres of floor area; ISO9001, ISO14001 and ISO/TS16949 management systems in place.

• New energy vehicles
• Electroacoustic devices
• Smart home appliances
• Wind power generation
• Elevator traction machines
• Industrial motors
• Automotive motors
• Air-conditioning compressors
• Mobile terminals
• Aerospace
• Medical equipment (MRI)
• Sensor devices

Sintered NdFeB is a contemporary high-strength magnetic material offering high remanence, high coercivity, a high maximum energy product and an excellent performance-to-cost ratio, and it is easily machined into a wide range of shapes and sizes, making it particularly suitable for high-power, high-field applications and for downsized, lightweight replacement products. The official website provides complete magnetic property parameter tables and demagnetisation curves for the seven grade series N, M, H, SH, UH, TH and EH.

Grade series: N (up to 80 °C), M (up to 100 °C), H (up to 120 °C), SH, UH, TH and EH; typical grade N35 with remanence Br of at least 11.8 kG / 1.18 T, magnetic induction coercivity Hcb of at least 10.8 kOe, intrinsic coercivity Hcj of at least 12 kOe and maximum energy product (BH)max of 33 to 37 MGOe; grade N54 reaching (BH)max of 51 to 55 MGOe; machined shapes cover blocks, arc segments, cylinders and rings; surface treatments include zinc plating (trivalent chromium blue-white or coloured zinc, salt spray over 48 h), tin plating, nickel plating (Ni-Cu-Ni, 10 to 30 µm) and electrophoresis, with coatings meeting ROHS and REACH requirements.

• New energy vehicle traction motors
• Aircraft
• MRI scanners
• Energy-saving inverter air-conditioning compressors
• Mobile phones
• Computers
• Wind power generation
• Maglev trains
• Elevator traction machines
• Industrial motors
• High-fidelity loudspeakers
• Instrumentation

Bonded NdFeB is a new type of composite permanent magnet material and device made from rapidly quenched nanocrystalline NdFeB powder bound with polymer binders such as thermosetting epoxy resin and thermoplastic engineering plastics; it is mainly used in permanent magnet motors and sensors for IT and office automation, smart home appliances and automotive applications. The official website also highlights product features such as magnet assemblies, a rich product range and multi-pole high-efficiency magnetisation.

Complete range of moulding presses: 3 T, 6 T, 16 T, 25 T, 40 T, 100 T and 315 T, with moulds designed and manufactured in house; magnetisation capabilities include inner-diameter multipole, outer-diameter multipole, planar multipole, skewed or helical magnetisation, differential magnetisation and combined magnetisation; surface treatment options include epoxy electrophoresis, acrylic electrophoresis, epoxy spray coating, PTFE spray coating, parylene deposition and vacuum impregnation, which may be selected and stacked according to the operating environment.

• IT and office automation
• Smart home appliances
• Automotive motors
• Sensors
• Permanent magnet motors

Magnet assemblies are one of the three product forms of Innuovo's magnetic materials and devices segment. Through injection moulding, adhesive bonding and similar processes, the company combines magnets with shafts, housings, plastic gears and other plastic or hardware parts to form assemblies, which facilitates direct installation by customers and reduces their secondary machining steps.

Combination methods: injection moulding and adhesive bonding; combinable parts include shafts, housings, plastic gears and other plastic or hardware components; supplied together with sintered and bonded NdFeB magnets; magnetising fixture design and magnetic circuit design are supported according to customer magnetic circuit requirements.

• New energy vehicles
• Electroacoustic devices
• Smart home appliances
• Sensor devices
• Industrial motors
• IT electronics

High-density tungsten alloy is a material based on tungsten (82% to 98% tungsten content) with additions of nickel, copper, iron, cobalt, manganese and other elements, produced by a special powder metallurgy route of mixing, forming, high-temperature sintering and finish machining, resulting in materials and parts with distinctive properties.

Grade categories: 90W, 91W, 91.5W, 92.5W, 93W, 94W, 95W, 95.5W and 96W, each available in NF, NF/H and NC conditions; density 17.1 ± 0.15 to 18.4 ± 0.15 g/cm³; yield strength 600 to 1,300 MPa; ultimate strength 650 to 1,400 MPa; elongation 2% to 30%; impact toughness at least 30 to at least 130 J/cm²; hardness HRC 24 to 44.

• Aerospace navigation devices
• Counterweights and shielding parts
• Instrumentation
• Medical equipment
• Industrial machinery

Core product category of Innuovo's electromechanical intelligent manufacturing segment, whose main entity is Zhejiang Lianyi Motor Co., Ltd. under the LINIX brand. The official website states that this segment covers AC, DC, brushless, stepper and servo micro special motors and electric linear actuators, parallel-shaft, worm and planetary gearboxes, professional controllers for motor drives and mobility scooters, and end products such as electric wheelchairs and mobility scooters.

Series products covering more than 200 specifications and over 5,000 models have been developed; subsidiary Zhejiang Lianyi Motor Co., Ltd. is the first Chinese motor enterprise to obtain IRIS certification (ISO/TS 22163) for the global rolling stock industry; ingress protection up to IP68, brushless motor frame sizes covering five series from 42ZWN to 130ZWN with power from 30 W to 2,000 W.

• Rail transit
• Security systems
• Smart gardening
• Smart home
• Smart logistics
• Mobility and health transport
• New energy
• Industrial automation
• Robotics
• Machine tool loading and unloading
• Textile machinery
• Printing machinery

LINIX AC micro special motors, part of the general-purpose category of the electromechanical intelligent manufacturing segment. The structural parts are designed with full allowance for overload capacity and have undergone rigorous verification calculations and testing, giving high strength and long service life; frame range 60 to 100 and power range 4 W to 200 W.

Frame range 60 to 100; power range 4 W to 200 W; stator and rotor cores use high-speed stamping dies across the range, stator machining runs on fully automatic lines and other structural parts are produced on high-precision automated equipment; starting performance is optimised for on-load starting requirements; individual customisation and team support are available.

• Smart home
• Small home appliances
• Industrial automation
• Packaging and printing machinery
• Medical machinery

LINIX DC micro special motors, part of the general-purpose category of the electromechanical intelligent manufacturing segment. Internationally advanced electromagnetic design software is used to fully calculate electromagnetic performance at an early stage and to simulate and compare multiple schemes, giving high efficiency; brush and electromagnetic noise control are both addressed, backed by extensive experience in brush selection, which determines service life.

High efficiency through optimisation with internationally advanced electromagnetic design software; low noise thanks to extensive design experience in brush and electromagnetic noise control; long service life with brushes from first-tier suppliers and rich selection experience; high protection with ingress protection up to IP68; tailor-made designs to customer requirements are supported.

• Smart home
• Smart logistics
• Industrial automation
• Automotive
• Security systems

LINIX brushless DC micro special motors, part of the general-purpose category of the electromechanical intelligent manufacturing segment. The products are highly standardised as a series; efficiency is raised through optimised motor design, while noise is effectively reduced by optimising the air-gap magnetic field and lowering torque ripple.

Frame sizes covering five series from 42ZWN to 130ZWN; power range 30 W to 2,000 W; efficiency more than 3% above conventional designs; ingress protection of IP65 or better; insulation class F.

• Robotic lawn mowers
• Smart logistics AGVs
• Smart home
• Industrial automation
• Garden machinery
• Security systems

Rare-earth permanent magnet AC servo motors built with proprietary design technology to deliver high efficiency, high power density and precise reliability, with performance indices reaching internationally advanced levels; they come with fully digital AC servo drives and high-precision planetary gearboxes.

Frames covering six series: 40, 60, 80, 100, 130 and 180; power from 50 W to 5 kW; maximum speed up to 6,000 rpm; high power density of 1.2 kW/kg at 3x overload; high instantaneous maximum torque at 300% of rated; cogging torque to rated torque ratio of 1%; totally enclosed self-cooled design with ingress protection IP65 (excluding shaft rotating parts and lead ends); equipped with 17 to 23 bit high-resolution encoders; equipped with low-backlash brakes; continuous duty; insulation class F; vibration grade V15; standard flange mounting.

• Robotics
• Machine tool loading and unloading devices
• Textile machinery
• Printing machinery
• Automated production lines

LINIX electric linear actuators use special corrosion-resistant and UV-resistant coatings together with a high-protection structural design, and offer an integrated structure with a built-in drive controller and position feedback, covering both outdoor industrial and household applications.

Salt spray resistance over 500 h and ingress protection IP69K; integrated structural design driven by brushless or servo motors, high-efficiency transmission, built-in drive controller, fast response, high speed and accurate positioning with a service life of more than one million cycles; compact and small in size with a quiet design at average noise below 45 dB, built-in limit switches and position feedback enabling position memory.

• Solar tracking
• Lawn mowers
• Sweepers
• Electric wheelchair seat height, backrest and leg adjustment
• Industrial automation

The LBDA048D10 intelligent brushless motor drive is compact and fully featured. Controlled by a microcontroller, it provides control modes such as start and stop, braking, forward and reverse rotation, AVI speed regulation, PWM speed regulation and RS-485 communication, together with multiple speed output modes; it also offers fault-tolerant protection including current limiting, overvoltage, undervoltage, thermal protection, sensor error checking and winding phase-loss detection.

Operating voltage 24 VDC; speed reference input 0 to 5 VDC, programmer setting or communication port setting; speed output as a 50% square wave signal proportional to speed; closed-loop control; square-wave modulation; protection includes stall protection, overcurrent protection and Hall sensor protection; model LBDA048D10 with input voltage range 15 V to 48 V, maximum motor current 10 A, matching brushless DC motors with 15 V to 48 V input voltage and operating current below 10 A; LNXT-122 hand-held programmer available as an option.

• Textile machinery
• Pumps
• Mobile shelving
• Centrifuge equipment

This intelligent MCU-controlled speed controller for single-phase AC asynchronous motors is compact, rich in functions, wide in speed range, low in energy consumption, long in service life and stable in operation; it can be paired with single-phase asynchronous motors manufactured at home and abroad to achieve feedback speed regulation and stepless speed regulation.

Supply voltage AC 220 V ±10%; speed range 90 to 1,400 rpm at 50 Hz; VR speed regulation; functions include soft start, soft stop and stall alarm; power range 6 to 250 W; switching power supply for stable voltage with low sensitivity to grid fluctuation plus lightning protection; rotational speed regulated by MCU-based digital intelligent PI control.

• Packaging machinery
• Printing machinery
• Food machinery
• Electronic instruments
• Garment machinery
• Medical machinery

This intelligent digital-display MCU-controlled speed controller for single-phase AC asynchronous motors is compact, rich in functions, wide in speed range, low in energy consumption, long in service life and stable in operation; it can be paired with single-phase asynchronous motors manufactured at home and abroad to achieve feedback speed regulation and stepless speed regulation, and it features a digital display panel.

Supply voltage AC 110 V ±10% and AC 220 V ±10%; speed range 90 to 1,400 rpm at 50 Hz; VR speed regulation; functions include soft start, soft stop and stall alarm; power range 6 to 250 W; switching power supply for stable voltage with low sensitivity to grid fluctuation plus lightning protection; rotational speed regulated by MCU-based digital intelligent PI control.

• Packaging machinery
• Printing machinery
• Food machinery
• Electronic instruments
• Garment machinery
• Medical machinery

The DYLC220 series AC servo drives use a high-performance microprocessor as the core control unit and implement an advanced fully digital motor vector control algorithm, allowing free switching among current-loop, speed-loop and position-loop closed-loop servo control modes with good compatibility and adaptability.

Output power range 100 W to 750 W; model DYLC220-400-01 is rated 400 W with continuous output current 2.5 A and maximum output current 7.5 A with ModBus and CANopen bus plus digital pulse control; DYLC220-400-02 is 400 W with EtherCAT plus digital pulses; DYLC220-750-01 is 750 W with continuous output current 4.5 A and maximum output current 13.5 A with ModBus and CANopen plus digital pulses; DYLC220-750-02 is 750 W with EtherCAT plus digital pulses; supports high-speed pulses below 2 MHz and analogue control, ModBus and CANopen bus control, 8 digital inputs and 8 digital outputs, 17-bit and 23-bit absolute and incremental encoders, dynamic field-weakening control, multiple built-in filters and notch filters, multi-segment speed and position profile modes with S-curve motion control, and a 3x overload design.

• Packaging machinery
• Printing machinery
• Conveying and handling machinery
• High-precision torque, speed and position control applications

These drives adopt an advanced fully digital dedicated motor control processor and a high-speed, accurate vector control algorithm, and are suitable for precise torque, speed and position control of low-voltage permanent magnet synchronous motors rated 24 to 60 V and 200 to 400 W; in some applications using low-voltage permanent magnet synchronous motors they achieve high-performance control comparable to high-voltage AC servo systems with a clear cost advantage.

Wide voltage input 24 V to 55 VDC; compatible feedback signals 2,500 P/R (incremental differential 5 V encoder), magnetoelectric encoder and absolute encoder; overcurrent, overtemperature, overvoltage and motor IIt protection; 4 digital inputs and 2 digital outputs with user-definable functions; supports Modbus, CANopen and EtherCAT communication control.

• Logistics AGV carts
• Logistics electric rollers
• Applications requiring fast response and high positioning and speed-holding accuracy

The LVCA024D05-01 on-board controller is a high-performance permanent magnet brushed motor controller that controls motor speed and torque smoothly and quietly and provides multiple safety protection functions, making it an ideal choice for various electric mobility scooters, electric sweepers, electric tricycles, electric leisure vehicles and electric carriers.

Ingress protection IP54 with a fully cast aluminium housing and waterproof sealing ring; 32-bit high-performance CPU; more than 70 programmable parameters configurable with a hand-held programmer; functions include downhill speed limiting and anti-rollback, high pedal detection, overvoltage protection, undervoltage deceleration, thermal protection (current halved at 75 °C, output cut off at 85 °C), current limiting, emergency stop, emergency reverse, cruise control, diagnostics, 2 operating modes, walk-along, electromagnetic brake detection, reverse beeper, load compensation and voltage compensation; models cover LVCA012D11-01 (12 V / 110 A, matched to 12 V 300 W), LVCA024D11-01 (24 V / 110 A, matched to 24 V 550 W), LVCA036D11-01 (36 V / 110 A, matched to 36 V 800 W) and LVCA012D07-01 (12 V / 70 A, matched to 12 V 180 W).

• Electric mobility scooters
• Electric sweepers
• Electric tricycles
• Electric leisure vehicles
• Electric carriers

A harmonic gearbox consists of three components: the circular spline, the flexspline and the wave generator. The circular spline is a rigid internal gear ring, usually with two more teeth than the flexspline, and is normally fixed to the housing; the flexspline is a thin-walled metal elastic part with gear teeth on the outer circumference of its open end, which deforms periodically as the wave generator rotates and is usually connected to the output shaft; the wave generator consists of an elliptical cam and a flexible bearing and is usually connected to the input shaft. Lianyi has carried out multiple iterations of theoretical design analysis plus experimental verification, so performance directly targets the latest generation of high-torque products from well-known foreign brands.

Single-stage gear ratio i = 50 to 300; transmission error generally below 1 arcmin; high load capacity because teeth contact along their flanks and many teeth mesh simultaneously; low weight because the core flexspline is a thin-walled part; smooth transmission, low impact noise and high transmission accuracy; naming rule LXC: LX denotes a Lianyi harmonic gearbox, C denotes a cup-shaped flexspline, -20 denotes a gear pitch circle diameter of 50 mm (20 × 2.54), -50 denotes a reduction ratio of 1:50 (wave generator input, circular spline fixed, flexspline output), -II denotes the structure type and -001 denotes the derivative code.

• Robot joints
• Industrial automation
• Precision transmission
• Machine tools
• Semiconductor equipment

Drive motors aimed at the pool cleaner industry, exported in large volumes to Europe, America and the Middle East, with stable partnerships established with leading international companies in the sector and a leading industry market share. The products use special stainless steel, environmentally friendly brass and other materials that resist corrosion and oxidation, and comply with the latest RoHS 3 and REACH standards.

Frame sizes include 35 mm, 43 mm, 52 mm, 63 mm and 80 mm diameters; product series are divided into mini, classic and watertight versions; fully automatic rotor production lines and automated assembly lines are in place with 100% automatic collection of key data; product operating life can reach more than 3,000 hours.

• Pool cleaners
• Underwater cleaning equipment
• Garden machinery

Drive motors for the drive mechanism of large ride-on mowers, suitable for vehicle weights above 280 kg, with a maximum speed of 10 km/h and a maximum climbing angle of 15 degrees; because grass juice is mildly corrosive, structural parts use a special anti-rust process and high-strength differential assemblies.

Suitable for vehicle weights up to more than 280 kg; maximum speed 10 km/h; maximum climbing angle 15 degrees; internal temperature sensor and controller can be fitted; gearbox ratios available in 13.5G, 20G, 24G and 29G; ingress protection IP54; EMC requirements met; thermal protection function included.

• Ride-on mowers
• Garden machinery
• Outdoor power equipment

Travel motors and blade-disc motors for robotic lawn mowers: the travel motor is a brushless DC motor, while the blade-disc motor is a 12-slot 8-pole brushless DC motor with an external iron housing that shields the control system from interference; rotational speed consistency is stable so the mower does not drift off course.

Travel motor: brushless DC motor, 42 mm outer diameter, torque up to 3.5 N·m, steel housing and high-strength wear-resistant gears, compact design, customisable mounting plate and connector, reinforced wheel axle and enlarged flange fixing screws, service life over 5,000 hours; blade-disc motor: brushless DC motor, 12 slots and 8 poles, 60 mm outer diameter, power up to 50 W, external iron housing for interference shielding, customisable shaft dimensions and deeper mounting holes for firm and reliable installation.

• Robotic lawn mowers
• Garden machinery
• Smart home

Drive units for solar photovoltaic panel cleaning equipment; the product has ingress protection IP65 and is suitable for locations with a large high-to-low temperature span, withstanding ambient temperatures down to -40 °C and up to +60 °C, so it can be used for long periods in weather with prolonged direct sunshine.

Ingress protection IP65; operating ambient temperature -40 °C to +60 °C; the product surface uses highly weather-resistant powder coating with adhesion grade 1; resistant to neutral salt spray; humidity-heat test of 500 hours or more.

• Solar photovoltaic panel cleaning equipment
• Solar power plant operation and maintenance
• New energy

Solar tracker drive motors consist of a planetary gearbox, the motor body and a double protective housing, with a load torque of 300 Nm; the product surface uses a special UV-resistant coating. An STG electric linear actuator series is also available for distributed multi-point support structures.

STG electric linear actuator series: distributed multi-point support structure, static load capacity 6 times the dynamic value, resistant to strong wind and snowstorms, ingress protection IP68, salt spray resistance over 500 h, applicable range extendable to near-shore areas, design safety factor 1.6 and design life 25 years; 90ZY24-130-01 and PC92-610A2566: load torque 300 Nm, ingress protection IP66 or better, environmental resistance class ISO12944-5-C4, design safety factor 1.4; products with design lives of 10, 15 or 20 years can be customised.

• Solar tracking mounts
• Photovoltaic power plants
• Harsh coastal, desert and plateau climates
• New energy

Servo motors for automated guided vehicles (AGVs). By improving the rotor pole structure and using an encoder with a memory structure, closed-loop control of current, speed and position is achieved, giving low torque fluctuation and precise positioning and meeting the varying path requirements of inertial guidance combined with high-precision drive and steering systems.

High-precision drive and steering system; three-loop closed-loop control of current, speed and position; low torque fluctuation and precise positioning; compatible with inertial guidance and other navigation methods; able to meet the varying path planning requirements of intelligent warehousing and logistics.

• Intelligent warehousing and logistics
• AGV carts
• Industrial logistics
• Automated handling

A full range of independently developed hydraulic oil pump motors for electric forklifts, with 24 V and 48 V voltage series and power ratings of 360 W, 500 W and 800 W, available in classic, disassembly-free and integrated valve block versions; the motors use ball bearing designs and are supplied with highly wear-resistant carbon brush materials.

Voltage series 24 V and 48 V; power ratings 360 W, 500 W and 800 W; versions include classic, disassembly-free and integrated valve block; ball bearing design; supplied with highly wear-resistant carbon brush materials; product operating life can reach more than 50,000 cycles.

• Electric forklift hydraulic systems
• Industrial logistics
• Warehousing and handling equipment

A custom-developed product for electric forklift steering systems; it uses a skewed-slot design for good low-voltage starting performance and is suited to speed regulation and low-speed operation; the external carbon brush design allows the brushes to be replaced independently, extending product service life.

Rated output torque 18.5 Nm; maximum breaking torque 60 Nm; can be supplied with encoders and resolvers; skewed-slot design for good low-voltage starting performance; external carbon brush design allowing independent brush replacement.

• Electric forklift steering systems
• Industrial logistics
• Warehousing and handling equipment

A classic geared motor series intended for flap barrier and access gate mechanisms. The motor uses all-stainless-steel screw fastening, making it suitable for outdoor gate mechanisms in rainy seasons and humid southern regions and tolerant of low temperatures; it can be supplied for different speed requirements.

Complete range of reduction ratios (3 to 360); maximum output torque 5 Nm; the motor uses all-stainless-steel screw fastening; tolerant of low temperatures; 25 W and 30 W motors are available according to gate weight in different situations, or custom development services can be provided.

• Flap barriers
• Access gates
• Security systems
• Rail transit

DC motors for sliding gates must switch frequently between forward and reverse, requiring a gearbox with high mechanical strength and long life. LINIX brushless geared motors adopt a parallel-shaft concept so that the gate can pass under the lintel; high-strength material treatment processes are used and the gearbox has been changed from a three-unit to a two-unit combination for higher assembly precision.

Gearbox hardness above 60 HRC for excellent wear resistance; the brushless geared motor adopts a parallel-shaft design so the gate can pass under the lintel; the gearbox has been changed from a three-unit to a two-unit combination, giving higher assembly precision and ensuring product consistency and stability; motors are available in high-power and standard versions.

• Sliding gates
• Security systems
• Smart home
• Access gates

A transverse geared motor product for advertising gate applications. Compared with axial geared motors, the transverse JC series gearbox can withstand a larger output torque, and the hollow output shaft mounting method is more flexible.

Transverse JC series gearbox; can withstand a larger output torque than axial geared motors; hollow output shaft mounting method for more flexible installation.

• Advertising gates
• Security systems
• Access gates

Because access swing gates start frequently and must also resist deliberate external force, they are used in a wide range of indoor and outdoor conditions. LINIX reduction mechanisms have good mechanical strength, resisting kicks, and the brushless motors provide a low temperature rise, high torque and high power density per unit volume.

Reduction mechanism with good mechanical strength, resisting kicks; brushless motor with low temperature rise and high torque; high power density per unit volume; suitable for a wide range of indoor and outdoor conditions and frequent starting scenarios.

• Swing gates
• Access gates
• Security systems
• Rail transit

Innuovo's geared motors for lane barriers and advertising barriers are built for gate drives at communities, parking lots and commercial entrances. They span 60 W to 200 W of power and let the specific power and RV gearbox be tailored to the customer's duty cycle, ensuring reliable operation across different boom lengths and open/close rhythms.

Type: geared motor; power range: 60–200 W; customizable: power and RV gearbox per duty; use: lane / advertising barriers; trait: smooth start-stop

• Lane barriers
• Advertising barriers
• Security systems
• Car park management

Mainly used in slow juicers in the small home appliance industry. The slow screw-extrusion technology of a slow juicer presses juice out gradually like wringing a towel, without destroying the cell structure of the fruit, so nutrients are preserved; the low-speed juicing generates no high heat, avoiding thermal oxidation of the juice.

Voltage and frequency 100-120 V / 50/60 Hz and 220-240 V / 50/60 Hz (optional); 2-pole motor; insulation class B; winding type copper or aluminium wire (optional); rated output power 100 W; reduction ratios 50:1, 72:1 and 81:1 (optional); maximum torque at least 33 N·m (at 60 Hz with a 72:1 reduction ratio), customisable; temperature rise at most 75 K (30 min at no load); no-load noise at most 50 dB; gear service life over 10,000 cycles; motor noise as low as 47 dB; styrene gas concentration from insulating varnish 0 ppm; motor load temperature rise as low as 50 K; food-grade gear grease and food-grade stainless steel output shaft.

• Slow juicers
• Small home appliances
• Smart home

Mainly used in the smart home electric curtain industry. The motor is concealed inside the roller tube and drives the transmission shaft to raise and lower the roller blind slats: when raising, the slats wind around the roller; when lowering, they slide down along the inside of the guide rail; a remote control operates the curtain to rise, stop and descend.

Models SJ-0126, SJ-0127 and SJ-0128; voltage and frequency 220-240 V / 50/60 Hz; 2-pole motor; insulation class F; copper wire winding; rated output power 11 W, 19 W and 33 W (customisable); rated torque 0.04 N·m, 0.07 N·m and 0.12 N·m (customisable); rated speed 2,500 ±10% r/min (customisable); small size and long life; strong overload capacity with a stall time of up to 6 minutes; high dimensional accuracy of stator and rotor for good performance consistency and low noise.

• Electric curtains (tubular motors)
• Smart home
• Smart shading

The ice-extrusion motor for ice makers is specially designed to meet the industry requirements of low noise and high load torque, with product power covering 11 W to 80 W; a specially designed gearbox solves the effect of axial impact loads during ice extrusion on operating life; voltage and reduction ratio can be customised on request.

Voltage 120 V / 60 Hz, 220 V / 50 Hz and 220 V / 60 Hz; reduction ratios 640 and 500; output power 11 W; no-load speed 5.4 rpm (60 Hz, n=640), 6.9 rpm (60 Hz, n=500), 4.55 rpm (50 Hz, n=640) and 5.8 rpm (50 Hz, n=500); rated load 20 N·m; safety protection includes a resettable thermal protector and a one-shot thermal fuse; insulation class B; noise 40 dB (standard quiet room, at 100 cm); power coverage 11 W to 80 W.

• Ice makers
• Small home appliances
• Smart home

The stirring motor for biological food waste disposers is specially designed to meet the industry requirements of low noise and low vibration; product power covers 4 W to 60 W and satisfies processing capacities of 1 kg to 5 kg; voltage and reduction ratio can be customised on request, and the motor can be fitted with a speed feedback device.

Voltage 220 V / 60 Hz and 120 V / 60 Hz; reduction ratio 100; output power 4 W; no-load speed 8.1 rpm (60 Hz); rated load 3 N·m; insulation class B; noise 40 dB (standard quiet room, at 45 cm); power coverage 4 W to 60 W.

• Biological food waste disposers
• Kitchen waste processing equipment
• Smart home

Drive motor solutions that Lianyi Motor supplies for electric wheelchairs, with series solutions for weights from 250 lbs to 450 lbs and speeds from 6 kph to 12 kph; gearbox options include involute gears, worm gears, planetary gears and worm plus planetary reducers, and they are matched to various vehicle models with front-wheel, mid-wheel and rear-wheel installation configurations.

Load capacity from 250 lbs to 450 lbs; speed 6 kph to 12 kph; gearbox options include involute gears, worm gears, planetary gears and worm plus planetary reducers; the gearbox adopts a parallel-shaft central output structure covering a wide reduction ratio range of 1:10 to 1:20; by ensuring a speed difference within plus or minus 2% between the left and right drives, precise and reliable drive solutions are provided; optimised electromagnetic field design gives high motor efficiency over a wide range; special gear materials achieve a quiet design; the coupling combines metal and rubber to reduce noise and improve reliability.

• Electric wheelchairs
• Mobility scooters for the elderly
• Rehabilitation medicine
• Mobility and health transport

The electric wheelchair product line of Zhejiang Innuovo Rehabilitation Equipment Co., Ltd. (the Innuovo Health Equipment Division), presented on the official website in three major series: Tiangong, Kaiwu and Changle. The products use lightweight materials such as carbon fibre, aluminium alloy and one-piece magnesium alloy frames, and are equipped with Lianyi brushless power systems, FOC controllers and intelligent electromagnetic brakes.

Frame materials carbon fibre plus aluminium alloy, all carbon fibre or one-piece magnesium alloy; maximum load 100 kg to 150 kg; vehicle weight as low as 9.9 kg to 19 kg; folding methods include front-rear folding and one-lift folding; wheel hub materials aluminium alloy or carbon fibre; power system Lianyi third-generation brushless motor; battery system ternary lithium; control system FOC controller; braking system intelligent electromagnetic brake; maximum speed 0-4.5 km/h; tyre sizes front 6 inch and rear 12 inch; ageing test over 200,000 cycles; lifetime frame warranty and 2-year warranty for the lithium battery and motor.

• Travel for the elderly
• Mobility for people with limited movement
• Rehabilitation medicine
• Mobility and health transport

The electric mobility scooter product line of Zhejiang Innuovo Rehabilitation Equipment Co., Ltd., presented on the official website in three major series: Zhiyu, Zhiya and Zhixing, aimed at the daily travel scenarios of elderly users and using Lianyi high-efficiency motors together with an intelligent battery protection system.

Load capacity up to 120 kg; uses Lianyi high-efficiency motors for strong, quiet and smooth power; the battery system has intelligent protective measures including 15 battery protections to prevent overcharging and over-discharging; a single charge gives a range of at least 20 km; high-brightness front headlight; electric folding function; intelligent controller design for intuitive operation.

• Daily travel for the elderly
• Neighbourhood mobility
• Rehabilitation medicine
• Mobility and health transport

The manual wheelchair product line within Innuovo Rehabilitation Equipment's other categories, under the Shunxing brand. The products target travel by the elderly and focus on being ultra-light and easy to fold and carry, ready to go with one lift and effortless to pick up with one hand.

Aluminium alloy frame (carbon fibre transfer printing process), high strength and light weight; vehicle weight as low as 10.7 kg; front and rear tyres are puncture-proof or honeycomb puncture-proof; dual shock absorption structures front and rear; split braking system with parking lock to prevent rolling; one-step or two-step folding for compact storage; can be taken directly onto aircraft; fits easily into a car boot.

• Travel for the elderly
• Rehabilitation care
• Home-based elderly care
• Travel and transport

The walking aid product line within Innuovo Rehabilitation Equipment's other categories, under the Xianyu brand. The products are positioned as sit-and-push rehabilitation walking aids, supporting a rest mode, a walking mode, a shopping mode and a wheelchair mode so that one unit serves several purposes, and they fold compactly for easy carriage onto aircraft, metro and buses.

Vehicle weight 5.5 kg; maximum load 100 kg / 115 kg; frame material carbon fibre; 6 height adjustment positions; large 200 mm front wheels; ergonomic handles; detachable large-capacity storage bag; one-step folding; colours available including black.

• Travel for the elderly
• Rehabilitation walking support
• People with limited movement
• Mobility and health transport

The sports walking stick product line within Innuovo Rehabilitation Equipment's other categories, under the Anbu brand. The products are lightweight and portable and are aimed at daily walking and hiking scenarios.

The shaft material undergoes surface treatment; colours are selectable; the overall weight is measured in grams thanks to a lightweight design; two models, S1 and S2.

• Daily walking assistance
• Hiking and mountaineering
• Travel for the elderly
• Rehabilitation assistance

The relay product line of Innuovo's incubation segment. The relevant newly incubated product forms include circuit safety controllers (including high-voltage DC relays) and intelligent high-voltage control boxes, as well as various magnetic materials, assemblies, functional modules and magnetisation test systems, aimed at new energy and power electronics safety control scenarios.

High-voltage DC relay products represented by the INVE01 series, with stroke models covering INVE01 60, INVE01 150B, INVE01 250, INVE01 600B AHTEL and INVE01 1000CS AHTEL; the product form is a circuit safety controller including high-voltage DC relays.

• High-voltage electrical systems of new energy vehicles
• Energy storage systems
• Power electronics safety control
• Industrial automation

The control box product line of Innuovo's incubation segment; the product form is an intelligent high-voltage control box used for circuit safety control and integrated power distribution in new energy vehicles and equipment. The official website presents models such as the 5G Century Hengxing control box, the Jiuzhou control box and the Chery control box as project-matched items.

Product form is an intelligent high-voltage control box; used together with circuit safety controllers such as high-voltage DC relays; serves high-voltage electrical integration scenarios in new energy vehicles and energy storage.

• High-voltage power distribution in new energy vehicles
• Energy storage systems
• Engineering vehicles
• Power electronics integration

One of the product lines of Innuovo's electroacoustic segment, undertaken by entities including Zhejiang Quanfang Technology Co., Ltd., Ruijin Quanfang Electronic Technology Co., Ltd. and Shenzhen Quanfang Audio Co., Ltd. Loudspeaker products are mainly used in sectors such as televisions, automobiles and smart homes. Note: this segment's former standalone website domain was trefan.cn, which is now invalid and unreachable, so the group website's industry segment page is used here as a verifiable source.

The product category is loudspeakers; application areas cover televisions, automobiles and smart homes; together with consumer electronics finished products, it belongs to the electroacoustic segment.

• Televisions
• Car audio
• Smart home
• Consumer electronics

One of the product lines of Innuovo's electroacoustic segment, undertaken by entities including Zhejiang Quanfang Technology Co., Ltd., mainly covering true wireless TWS earphones, Bluetooth speakers, soundbars and innovative consumer electronics. Note: this segment's former standalone website domain was trefan.cn, which is now invalid and unreachable, so the group website home page is used here as a verifiable source.

Products cover true wireless TWS earphones, Bluetooth speakers, soundbars and innovative consumer electronics; together with loudspeaker products, they belong to the electroacoustic segment.

• Consumer electronics
• Smart home
• Personal audio
• Automotive aftermarket