CALB Technology (Changzhou) Co., Ltd.

CALB's flagship passenger-car power battery for BEV applications, engineered for all-climate use and ultra-long range. It adopts a high-nickel/high-voltage multi-element material system with ONE-STOP minimalist design, and integrates TPP thermal-propagation suppression and lossless cell heating (rapid heating at 6C/min, temperature difference <8C), delivering near-zero degradation at -20C and 400 km of range from a 5-minute charge. Pack capacity exceeds 120 kWh with over 1000 km of full-charge range, and it passes nail-penetration and gunshot tests without fire.

Full-charge range: 1000 km; Fast-charging replenishment: 400 km/5 min; All-climate temperature range: -20C; Pack capacity: 120 kWh+; Ultra-fast charging: 8 min (20%-80% SOC)

• BEV passenger cars (A0-segment to D-class SUV/coupe/MPV)
• Long-range mobility in severely cold regions
• 800V high-voltage fast-charging platform vehicles

A Topstream ultra-fast-charging battery for EREV (extended-range electric vehicle) applications, built on a high-voltage LFP architecture for superior energy efficiency. High specific-energy cells and extreme space optimization create a 63 kWh high-voltage LFP range-extender pack with 400 km+ of pure-electric range, sustained 10C+ discharge and 400 km of replenishment in 5 minutes. Combined fuel consumption drops to 4.0 L/100km with a total range of 1000 km; the pack meets the 2026 national standard and features 15 layers of hardcore safety protection.

Sustained discharge rate: 10C+; High-voltage platform: 900V; Fast-charging replenishment: 400 km/5 min; Pure-electric range: 400 km+; Combined fuel consumption: 4.0 L/100km; Cycle life: 1500 cycles

• EREV SUVs and sedans
• Intercity long-distance hybrid travel
• High-voltage fast-charging EREV platforms

The industry's first phosphate-family cylindrical battery with the highest energy density for PHEV applications: volumetric energy density reaches 430 Wh/L for LFP and 480 Wh/L for LMFP, with discharge capability above 20C and manufacturing efficiency over 300 ppm. Pairing the combustion engine and electric motor at their best, it eliminates pure-electric range anxiety while enabling low-cost mobility and full power delivery.

LFP volumetric energy density: 430 Wh/L+; LMFP volumetric energy density: 480 Wh/L+; Discharge rate: 20C+; Manufacturing efficiency: 300 ppm+

• PHEV SUVs and sedans
• High-performance hybrid platforms
• AI hybrid and off-road super-hybrid models

A platform-based large-capacity battery system of the FarReach family for light commercial vehicles, delivering 200 Wh/kg system energy density and a 500 km range. It covers vans, light trucks and buses: the light-truck solution uses stacked LFP cells with dual-pillar dual-gun charging to replenish 20%-80% SOC in 18 minutes for 350 km of range, while the bus solution offers a 10-year/1,000,000 km vehicle-battery equal-life warranty with energy density above 170 Wh/kg and 260 Wh/L, GB 38031-2025 compliance, IP68 protection and a wide -30C to 65C operating window.

System energy density: 200 Wh/kg; Range: 500 km; Light-truck energy density: 160 Wh/kg+; Bus energy density: 170 Wh/kg; Fast charging: 18 min (20%-80% SOC); Light-truck warranty: 8 years / 800,000 km

• Van-based logistics and delivery vehicles
• Urban and intercity light trucks
• Battery-electric buses and BRT

A standardized battery system for heavy trucks and construction machinery, supporting 4C ultra-fast charging, a 15-year design life and up to 3,000,000 km of service. The heavy-truck solution achieves an industry-leading 167 Wh/kg system energy density with at least 94% enclosure volume utilization, 12-minute minimum 20%-80% SOC charging and an 8-year/1.8-million-km long-cycle warranty. The construction-machinery variant passes IP68/IP6K9K and 1000-hour acidic/alkaline salt-spray tests with an 8-year/4500-cycle warranty, flexibly configurable in rear-mount, under-chassis (chargeable/replaceable) or hybrid layouts.

Ultra-fast charge rate: 4C; Design life: 15 years; Cycle mileage: 3,000,000 km; Heavy-truck system energy density: 167 Wh/kg; Heavy-truck ultra-fast charge: 12 min (20%-80% SOC); Machinery cycles: 4500 cycles

• Tractors, dump trucks and mixer trucks
• Electric loaders, excavators and wheel loaders
• Trunk-line logistics and high-duty-cycle construction machinery

The FarReach marine battery system for electric vessels worldwide, the first to achieve a service life beyond 15 years in marine use, with 4C ultra-fast charging and 12,000 ultra-long cycles. It holds type approvals from the CCS, ABS, LR, BV, RINA and DNV class societies, provides IP68 protection, up to 3C power output and a pack energy density of 147 Wh/kg or more, pioneering the industry's nano-separation active safety protection technology. It serves four scenarios: passenger ships, offshore engineering vessels, merchant ships and special-purpose vessels.

Ultra-fast charge rate: 4C; Design life: 15 years+; Cycle life: 12,000 cycles; High-rate charge/discharge: 3C; Pack energy density: 147 Wh/kg+

• Zero-emission passenger ships and cruise ferries
• Offshore engineering vessels and drilling platforms
• Green merchant ships and special vessels such as tugs and dredgers

CALB's first-generation flight-dedicated battery for eVTOL low-altitude mobility, built on 9-series high-nickel/silicon chemistry with 300 Wh/kg energy density and 6C fast-charging capability. Semi-solid-state technology and highly integrated CTP design deliver aviation-grade safety with multi-level 4X safety redundancy and triple protection against 1000C, providing lightweight, high-power flight energy for urban passenger transport, sightseeing, logistics transport and emergency rescue.

Energy density: 300 Wh/kg; Fast-charge rate: 6C; Cathode system: 9-series high-nickel silicon; Safety redundancy: 4X

• eVTOL urban passenger transport and hub shuttles
• Low-altitude sightseeing flights
• Logistics transport and emergency-rescue aviation

CALB's second-generation eVTOL flight battery raises energy density to 360+ Wh/kg. A hybrid semi-solid-state system withstands extreme temperatures up to 200C, while the Topstream structure cuts DCR by 50%, balancing higher power with higher safety. It suits long-endurance low-altitude scenarios such as high-range full-tilt flying cars and compound-wing passenger aircraft.

Energy density: 360 Wh/kg+; Extreme temperature tolerance: 200C; DCR reduction: 50%; Safety redundancy: triple (1000C)

• High-speed long-range full-tilt flying cars
• Compound-wing passenger eVTOL
• Crewed/uncrewed flight transport platforms

The second-generation product of CALB's Everlast storage-cell line, first in the industry to reach mass production, with 15,000-cycle life and zero degradation over the first 1000 CLS+. As the core cell of 5MWh-class liquid-cooled container systems, it pairs with the 314Ah-1P104S liquid-cooled battery box and the 20-ft 5MWh high-voltage liquid-cooled container for generation-side, grid-side and user-side storage.

Capacity: 314Ah; Cycle life: 15,000 cycles; Zero-degradation cycles: 1000 CLS+; Matching system: 5MWh container

• Grid-side peak shaving and frequency regulation
• Generation-side wind/solar storage
• User-side commercial and industrial storage

CALB's large-capacity storage cell, the optimal cell solution for 6.25MWh systems. Fully compatible with existing production lines and technology, it was brought to market at the industry's fastest mass-production pace; it pairs with the 392Ah-1P104S liquid-cooled battery box and the 20-ft 6.25MWh+ high-voltage liquid-cooled container, raising area energy density and system integration.

Capacity: 392Ah; Matching system capacity: 6.25MWh; Area energy density: 424kWh/m2; System cycles: 8000 cycles+

• Large independent storage power stations
• Generation-grid-load-storage integrated bases
• Grid-side high-voltage liquid-cooled containers

A large-capacity CALB storage cell with 440Wh/L or more energy density, achieving 3 years of zero degradation and 15,000+ cycles. It is also compatible with marine scenarios (capacity up to 588Ah for energy-type products), combining high energy density with ultra-long life for long-duration and high-energy storage applications.

Capacity: 588Ah; Energy density: 440Wh/L+; Cycle life: 15,000 cycles+; Zero degradation: 3 years

• Long-duration storage stations
• High-energy storage systems
• Marine energy-type power batteries

CALB's new-generation large-capacity stacked storage cell with 440Wh/L or more energy density, paired with 6.8MWh+ 20-ft standard container systems. The stacking process delivers higher volume utilization and integration, targeting the cost-reduction needs of ultra-large storage stations.

Capacity: 684Ah; Energy density: 440Wh/L+; Matching system capacity: 6.8MWh; Enclosure: 20-ft standard container

• Gigawatt-scale generation/grid-side storage
• Ultra-high-voltage renewable energy bases
• Ultra-large independent storage stations

A 1P104S liquid-cooled battery box built on 314Ah cells, whose minimalist design achieves higher energy density per box. It meets seismic intensity 8 and new-national-standard vibration tests, with a pressure withstand rating of 4380VDC and system voltage of 1500V. Cell-level thermal insulation, pack-level thermal-runaway suppression and one-pack-one-detection, one-pack-one-fire-suppression are provided, while an independent liquid-cooling plate keeps the maximum temperature difference at 3C or below.

Cell capacity: 314Ah; System voltage: 1500V; Pressure withstand rating: 4380VDC; Liquid-cooling temperature difference: 3C or less; Protection: IP67

• Storage for grid companies and energy groups
• Support for large power generators
• High-voltage liquid-cooled container integration

A 20-ft 5MWh high-voltage liquid-cooled container delivering 35% higher volumetric energy, 20% longer cycle life and low degradation, with 95% energy efficiency. Rack-level IP67 sealing against water, dust and condensation plus system-level submerged water fire suppression; intelligent variable-frequency control cuts self-consumption by 20%, reducing overall investment and levelized cost of energy by 15%.

System capacity: 5MWh; Volumetric energy gain: 35%; Energy efficiency: 95%; Cycle life gain: 20%; Self-consumption reduction: 20%

• Grid-side peak shaving and frequency regulation
• Large generation-grid-load-storage bases
• Industrial and commercial park storage

The overseas-market version of the 314Ah-1P104S liquid-cooled battery box, adopting CIR box-integrated minimalist design. It meets seismic intensity 8 and road-condition class 3 requirements; key components carry UL safety certification, and pack-level thermal-runaway suppression complies with and exceeds NFPA, UL, IEC and UN standards. Optimized active-lithium utilization extends service life.

Cell capacity: 314Ah; System voltage: 1500V; Certifications: UL/NFPA/IEC/UN; Seismic rating: intensity 8

• European high-voltage electric bus storage
• Overseas grid-side projects
• Overseas commercial and industrial storage

The overseas-market 314Ah 20-ft ISO container features a highly integrated, efficient layout that saves 22.5% of footprint, with a design life of up to 20 years. Multi-angle monitoring with tiered intelligent fire suppression, three-layer cell-pack-container explosion protection, integrated air cooling that lowers auxiliary power draw, and factory pre-assembly with commissioning reduce lifecycle cost.

Design life: 20 years; Footprint saving: 22.5%; Self-consumption reduction: 20%; Explosion-protection layers: 3; Container: 20-ft ISO

• Overseas large storage power stations
• Overseas renewable plant support
• Overseas independent storage

A 1P104S double-row large-module liquid-cooled battery box built on 392Ah cells; high integration delivers higher energy density per box. The high-strength roll-formed enclosure meets seismic intensity 8, road class 3 and new-national-standard vibration requirements. PACK-level fusing and multi-layer insulation protection are provided, with third-generation cell-level thermal barriers and fourth-generation intelligent liquid cooling keeping the temperature difference at 2.5C or below.

Cell capacity: 392Ah; Liquid-cooling temperature difference: 2.5C or less; Seismic rating: intensity 8; Thermal barrier: 3rd-generation cell-level; Protection: IP67

• 6.25MWh container integration
• Grid-side high-voltage liquid cooling
• Generation and grid-side storage

A 20-ft 6.25MWh+ high-voltage liquid-cooled container with 424kWh/m2 area energy density, supporting back-to-back and side-by-side layouts. PACK-level fire suppression and third-generation thermal barriers, IP67 pack protection against windblown sand and salt fog, fourth-generation intelligent thermal control with a temperature difference of 2.5C or below, 8000+ cycles and 95%+ DC-side efficiency; zero newly developed parts ensure mature reliability.

System capacity: 6.25MWh; Area energy density: 424kWh/m2; Cycle life: 8000 cycles+; Energy efficiency: 95%+; Liquid-cooling temperature difference: 2.5C or less

• Gigawatt-scale storage stations
• Desert and wasteland mega-bases
• Grid-side and independent storage

A high-voltage liquid-cooled outdoor cabinet for commercial and industrial scenarios, with a split design enabling 1-10 parallel groups and 350kW/373kWh continuous output. It suits high-profit applications such as frequency-regulation ancillary services. Each cabinet integrates a dehumidifier, BMS and fire suppression, with 3-level venting at cell-pack-cabinet and independent grounding and lightning protection; intelligent thermal management supports a 15-year service life, while the standalone cabinet plus intelligent combiner with cloud AI enables seamless 200-5000kWh configurations.

System capacity: 373kWh; Continuous output: 350kW; Design life: 15 years; Parallel expansion: 1-10 groups; Energy density: 210+kWh/m2

• Commercial and industrial peak shaving
• Frequency-regulation ancillary services
• Smart park storage

A low-voltage liquid-cooled outdoor cabinet for commercial and industrial scenarios, forming a product portfolio with the 373kWh high-voltage cabinet. It offers one-stop services from the battery system and EMS to intelligent monitoring, with 20% less floor space and high integration, adapting to SME power needs with an efficient, intelligent and safe storage solution.

System capacity: 261kWh; Floor space reduction: 20%; Integration: high; Protection: cabinet-level BMS + fire suppression; Service life: 15 years

• SME commercial and industrial storage
• Park peak shaving
• Backup power

CALB's standardized modular residential energy-storage product. Series and parallel expansion meets diverse capacity requirements, and it is widely used in Europe, North America and Australia. Friendly app interaction, reduced purchase and electricity costs, compatibility with mainstream inverters and multi-layer safety protection (easy interaction, high return, high compatibility, high safety).

Nominal voltage: 51.2V; Module capacity: 5.12kWh; Cycle life: 6000 cycles+; Compatibility: mainstream inverters; Interaction: APP

• Residential storage in Europe
• Household storage in North America/Australia
• Off-grid and backup power

CALB's large-capacity standardized modular residential storage product, forming a capacity ladder with the CJ160F5AA. Standard modular series/parallel expansion, compatibility with mainstream inverters, app interaction, high return and multi-layer safety protection cover diverse household energy demands overseas.

Nominal voltage: 51.2V; Module capacity: 10.24kWh; Cycle life: 6000 cycles+; Compatibility: mainstream inverters; Interaction: APP

• Residential storage in Europe
• Household storage in North America/Australia
• Off-grid and backup power

CALB's first-generation Topstream high-energy LFP power battery for light power applications (electric motorcycles, e-bikes, e-trikes, forklifts, AGVs), with volumetric energy density of 385+Wh/L, 10-16C discharge power and -20C chargeability. Automotive-grade cells plus no-fire, no-smoke safety; ultra-high energy density (ternary above 300Wh/kg, LFP above 180Wh/kg), 20-minute 10%-80% charging, 5-year warranty and 10-year design life, covering 1-30kWh and over 700 km of motorcycle range.

Volumetric energy density: 385Wh/L+; Discharge rate: 10-16C; Charging temperature range: -20C; Fast charging: 20 min (10%-80%); Design life: 10 years

• Electric motorcycles and premium e-mopeds
• E-bikes and e-trikes
• Forklifts and AGV industrial vehicles

CALB's second-generation Topstream high-energy LFP power battery for light power and robotics, raising volumetric energy density to 430+Wh/L with 10-16C discharge power and -20C chargeability. World-first fitment on new-national-standard premium urban e-bikes and luxury e-mopeds, it retains automotive-grade cells and multi-level safety management, with ultra-high energy density, extreme fast charging, wide temperature range and ultra-long warranty.

Volumetric energy density: 430Wh/L+; Discharge rate: 10-16C; Charging temperature range: -20C; Fast charging: 20 min (10%-80%); Design life: 10 years

• Luxury e-mopeds
• New-national-standard e-bikes
• Light power and robotics platforms

CALB's 9-series ternary 4695 cylindrical battery for robotics, with 310-360Wh/kg energy density and 2C fast-charging support, meeting humanoid and industrial robots' demand for ultra-high energy density and rapid replenishment in high-duty operation, based on advanced automotive-grade cell technology to deliver efficient, stable and economical power.

Energy density: 310-360Wh/kg; Fast-charge rate: 2C; Cell format: 4695 cylindrical; Chemistry: 9-series ternary; Use: humanoid/industrial robots

• Humanoid robots
• Industrial robots
• High-duty mobile equipment

CALB's Boundless solid-state battery on the solid-state roadmap, reaching 450Wh/kg energy density as the flagship of the solid-state direction of materials innovation, also covering robotics and humanoid scenarios (solid-state energy density 350-600Wh/kg). High safety and high energy density empower frontier applications such as the low-altitude economy and robotics.

Energy density: 450Wh/kg; System: solid-state; Robotics solid-state energy density: 350-600Wh/kg; Safety: aviation-grade multi-layer protection

• eVTOL flight batteries
• Humanoid and industrial robots
• High-end power and storage frontiers

CALB's previous-generation large-capacity storage cell with 280Ah capacity, a proven product for large high-voltage storage projects (such as State Grid Jiangsu Phase II Kunshan and the China Resources Alashan/Urat wind-storage grid-side projects). It laid the foundation for the later 314/392/588/684Ah generations and was widely deployed in early generation and grid-side storage demonstration projects.

Capacity: 280Ah; Application: large high-voltage storage projects; System voltage class: 1500V; Positioning: previous-generation mass-production cell

• Grid-side lithium storage stations
• Wind-storage and PV support
• Early generation-grid-load-storage demonstration