Sungrow

The IDC480 is Sungrow's industry-first high-protection isolated air-cooled ultra-fast charger with a maximum output of 480 kW. Its original isolated air-duct design fully seals the power-electronics chamber, separating internal components from the cooling airflow to combine high efficiency with high protection. Rated IP65, it is maintenance-free and washable with low-noise operation for optimal lifecycle cost. A 5-minute charge delivers 400 km of range, easing range anxiety. It is widely used at urban roads, highway service areas, industrial parks and scenic parking lots across more than 20 countries.

Max output: 480 kW (5 min charge for 400 km range); Protection: IP65 (C5 anti-corrosion); Cooling: industry-first isolated air-cooling, independent duct, fully sealed power chamber; Max current: 600 A (liquid-cooled terminal); Noise: low-noise operation; HMI: spring-assisted cable arm, RFID/QR/plug-and-charge unlock; Thermal: intelligent 3D cooling, module temp difference <=2C; Reliability: 100% full-load high-temp aging, failure rate below half the industry; Compatible with PV-storage-charging and cloud platform.

• Urban public charging stations
• Highway service-area ultra-fast stations
• Industrial-park PV-storage-charging sites
• Scenic and commercial parking lots

The CDC2880/1920/960 is Sungrow's split-type ultra-fast charging group offering 2880 kW, 1920 kW and 960 kW ratings, downward compatible with 800 kW and 720 kW. The IP55 enclosure withstands harsh outdoor environments. AI diagnostics and active protection raise safety and uptime. It supports instant charging and always-on operation for high-traffic stations.

Rated power: 2880/1920/960 kW (compatible 800/720 kW); Protection: IP55 enclosure; Type: split-type charging group, flexible multi-terminal; Safety: AI diagnostics, active protection; Uptime: >97%; Environment: harsh outdoor; O&M: cloud central management, remote diagnostics.

• Urban charging hubs
• Highway ultra-fast networks
• Large industrial-park stations
• Bus and logistics fleet depots

The CDC720 split-type DC charging stack offers 720/640/600 kW. Its ring-shaped intelligent dynamic power allocation dispatches at 40 kW granularity for higher efficiency. With PV-storage communication it supports source-grid-load-storage aggregation and cloud O&M.

Rated power: 720/640/600 kW; Allocation: ring intelligent dynamic allocation, 40 kW granularity; Interface: PV-storage comms, energy aggregation; Safety: AI diagnostics, active protection; Terminals: 250A fast charge and 600A liquid-cooled; O&M: cloud platform.

• Large public charging stations
• PV-storage-charging sites
• Truck and machinery depots
• Urban fast-charge networks

The CDC480 DC charging stack provides 480/360 kW with efficiency above 96% and up to 600 A. Its ring full-flexible dynamic power allocation maximizes utilization, mixing fast and liquid-cooled terminals. Uptime exceeds 97% with 100% full-load aging; optional IP65 terminals and PV-storage integration avoid transformer upgrades.

Rated power: 480/360 kW; Efficiency: >=96%; Max current: 600 A; Uptime: >97%; Allocation: ring full-flexible, 40 kW granularity; Noise: <=65 dB; Terminals: 250A and 600A liquid-cooled; PV: storage integration, no transformer upgrade; Reliability: 100% full-load aging.

• Urban public stations
• PV-storage-charging stations
• Highway service areas
• Industrial-park lots

The CDC400-C DC charging stack offers 400/360/320 kW. Built-in AC contactors give zero standby loss, and dual-gun/dual-pile charging fits heavy trucks and machinery. High-quality components ensure long-term reliability.

Rated power: 400/360/320 kW; Standby: built-in AC contactor, zero loss; Charging: dual-gun and dual-pile; Fit: heavy trucks and machinery; Components: high-quality; O&M: cloud.

• Logistics-park truck charging
• Mining machinery depots
• Port vehicle charging
• Urban heavy-freight depots

The CDC160 low-power DC charging stack offers 160/120/80 kW. Built-in AC contactors give zero standby loss for economical running. Ordered charging adapts to grid load, ideal for communities and parks.

Rated power: 160/120/80 kW; Standby: built-in AC contactor, zero loss; Strategy: ordered charging, smart regulation; Components: high-quality; O&M: cloud, remote; Use: distributed low-power.

• Residential community charging
• Town and rural charging spots
• Park and office parking
• Small commercial sites

Sungrow's integrated DC chargers cover IDC30E (30 kW), IDC180E (120/150/180 kW) and IDC480E/IDC480E-C (240-480 kW) in a compact, easy-to-deploy form. Isolated air-cooling with IP65 and C5 protection suits outdoor and coastal sites. Flexible modules and multi-gun terminals with iEnergyCharge cloud management cover destination, fleet and overseas use.

Power: IDC30E 30 kW; IDC180E 120/150/180 kW; IDC480E/IDC480E-C 240-480 kW; Protection: IP65, C5 anti-corrosion; Cooling: isolated air-cooled, sealed chamber, <=2C; Expansion: 240-480 kW modular; Terminals: up to 4 guns, 3 liquid-cooled; Unlock: RFID/QR/card/plug-and-charge; Platform: iEnergyCharge; PMLM life management.

• Destination and campus charging
• Operator public stations
• Overseas varied-climate sites
• Urban and community fast charge

The AC7 is Sungrow's AC charging pile for slow and destination charging. Rated IP65 with UV protection it withstands harsh outdoor use. Ordered charging and smart power adjustment are grid-friendly, and it pairs with the SunGrow platform for remote management.

Type: AC charging pile (slow); Protection: IP65, UV-resistant; Strategy: ordered charging, smart regulation; Environment: harsh outdoor; Connectivity: platform, remote; Install: wall/stand; Output: ~7 kW AC.

• Residential community slow charge
• Commercial-complex parking
• Public destination parking
• Campus and workplace charging

SunGrow EV Charging Operation & Management Platform is a cloud platform using big data and IoT for refined operation, automated O&M and intelligent diagnostics. It is compatible with mainstream platforms to maximize station efficiency and lower cost. It supports monitoring, orders, billing, fault diagnosis and remote upgrade, deeply integrated with IDC/CDC chargers.

Type: SaaS charging operation cloud; Tech: big data, IoT, AI diagnostics; Functions: refined operation, automated O&M, diagnostics, monitoring, orders, billing, fault warning, remote upgrade; Compatibility: mainstream platforms, per-terminal access; O&M: higher uptime, lower cost; Deployment: cloud, multi-site.

• City-level charging infrastructure O&M
• Highway and public network management
• PV-storage-charging site operation
• Industrial-park charging O&M

Sungrow EV (subsidiary) supplies high-power-density, platform-based motor controllers (MCU) for passenger NEVs. They support multiple powertrain platforms and fit A00 to B-segment cars. Developed under IPD with IATF 16949 and CNAS lab, they already power models like Chery QQ Ice Cream, Wuling Bingo and Lynk 08.

Type: passenger MCU; Features: high power density, platform-based, high reliability; Fit: A00 to B-segment; Quality: IATF 16949, CNAS lab; R&D: IPD, ~40% engineers; Mfg: automated, full digital traceability; Models: Chery QQ Ice Cream, Wuling Bingo, Lynk 08.

• A00 micro EVs
• Mainstream passenger NEVs
• PHEV and range-extender
• Powertrain system integration

Sungrow EV supplies on-board chargers (OBC), DCDC converters and power-system integration for passenger NEVs. These combine flexibly with MCUs for efficient platform-scale production. Leveraging Sungrow's power-electronics heritage they offer high reliability and density for stable vehicle power and charging conversion.

Type: OBC, DCDC converter, power integration; Features: high density, platform, reliable; Combination: flexible with MCU; Quality: IATF 16949, full traceability; Fit: A00 to B-segment; R&D: IPD, CNAS lab.

• Passenger on-board charging
• Vehicle low-voltage conversion
• PHEV and range-extender
• Platform power integration

Sungrow EV offers platform-based MCUs for commercial NEVs with extensible power fitting vans, light trucks and buses. High protection and reliability simplify vehicle layout. They enable efficient integration and volume production for high-frequency urban logistics and passenger transport.

Type: commercial MCU; Design: platform, extensible power; Fit: vans, light trucks, buses; Protection: high-grade, reliable, simpler layout; Quality: IATF 16949; Use: urban logistics, bus transit.

• Urban logistics vans
• Light trucks and cargo
• NEV buses
• Bus and transit fleets

Sungrow EV supplies OBC, DCDC converters and power integration for commercial NEVs, combining flexibly with MCUs to simplify layout. High protection and reliability suit the demanding duty cycles of commercial fleets.

Type: commercial OBC, DCDC, power integration; Features: platform, high protection, reliable; Combination: flexible with MCU; Fit: vans, light trucks, buses; Quality: IATF 16949, traceability.

• Commercial on-board charging
• Commercial low-voltage conversion
• Urban logistics fleets
• Passenger and bus vehicles

Sungrow EV provides motor controllers and on-board power with multiple power options for construction-machinery electrification. They support single-motor, range-extender or multi-motor modes for excavators, loaders and mining trucks. High integration, reliability and efficiency suit harsh, high-load duty.

Type: machinery MCU, on-board power, multi-motor drive, integration; Drive: single, range-extender, multi-motor; Features: high integration, reliability, efficiency; Duty: harsh, high-load; Expansion: multi-power, platform; Quality: IATF 16949.

• Electric excavators and loaders
• Mining electric trucks
• Machinery electrification retrofit
• Port and mine heavy equipment