Rosenberger Asia Pacific Electronic Co., Ltd.

1/4"R copper-conductor standard RF coaxial cable, foamed PE insulation, 50 ohm impedance, black UV-resistant jacket

1/4"R copper-conductor standard RF coaxial cable, foamed PE insulation, 50 ohm impedance, black UV-resistant jacket; 1/2"R aluminium-conductor standard RF coaxial cable, foamed PE insulation, 50 ohm impedance, black UV-resistant jacket; 1/4"S copper-conductor ultra-flexible RF coaxial cable, foamed PE insulation, 50 ohm impedance, black UV-resistant jacket; 1/2"R copper-conductor low-loss RF coaxial cable, foamed PE insulation, 50 ohm impedance, black UV-resistant jacket; 1/2" radiating leaky cable, foamed PE insulation, 50 ohm impedance, black flame-retardant jacket

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

3/8" two-hole feeder cable fixing clip, stainless steel bracket, UV-resistant modified PP fixing clamp, providing safe and reliable performance

Insulating tape 19 mm x 20 m, used with waterproof putty for waterproofing feeder connectors; insulating tape 50 mm x 10 m, used with waterproof putty for waterproofing feeder connectors; premium insulating tape 19 mm x 20 m, used with waterproof putty for waterproofing feeder connectors; premium insulating tape 50 mm x 10 m, used with waterproof putty for waterproofing feeder connectors; self-adhesive tape 19 mm x 9 m, used together with insulating tape for waterproofing feeder connectors

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Remote radio units have become one of the key subsystems in present and future distributed wireless transmission facilities, improving the efficiency of existing signal transmission and extending network coverage within an easily deployable architecture. They separate part of the former base station module and detach it from the RRH through radio baseband control (Radio Server, RS), simplifying maintenance to the RS side; one radio baseband RS can connect several RRHs over optical fibre, saving space, reducing cost and raising networking efficiency. Remote radio units are generally fitted with standard or customised optical, power, data and RF transmission interfaces for network transmission and connection.

Product series composition: base station fibre-optic connection products, base station multi-core optical/electrical cable connection solutions, base station composite optical-electrical cable connection solutions, base station power cable assemblies and power connectors; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Rosenberger supplies connection solutions for mobile communications, industry, aerospace and data centres, including a wide range of general-purpose RF coaxial connectors, cable connectors, PCB connectors and custom connectors. RF connector specifications, installation guides and other documents can be downloaded online. Rosenberger PCB connectors generally cover board-to-board and board-to-filter scenarios. Board-to-board connectors accommodate a certain axial and radial tolerance and suit fast blind-mate assembly between boards, saving assembly cost. Typical connectors: SMP, Longwipe SMP, P-SMP, Mini-SMP, W-SMP and others.

Product series composition: PCB connectors, push-pull self-locking connectors and cable assemblies; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The Rosenberger 2.0 mm indoor single-core optical cable (CPR Dca) is designed specifically for indoor communications. Rosenberger’s consistently high standards in material selection ensure outstanding flame-retardant performance, making it an ideal solution for applications with stringent flame-retardant requirements.

The Rosenberger 2.0 mm indoor single-core optical cable (CPR Dca) is designed specifically for indoor communications; Rosenberger’s consistently high standards in material selection ensure outstanding flame-retardant performance, making it an ideal solution for applications with stringent flame-retardant requirements; the Rosenberger 3.0 mm indoor single-core optical cable (CPR Dca) is designed specifically for indoor communications; Rosenberger’s consistently high standards in material selection ensure outstanding flame-retardant performance, making it an ideal solution for applications with stringent flame-retardant requirements

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

With the rapid development and wide deployment of FTTx technology, Rosenberger is committed to providing end-to-end network infrastructure solutions; the product range suits scenarios including the central office (CO), the optical distribution network (ODN), end-user access and in-building applications. Rosenberger optical products are widely used in end-to-end EPON and GPON systems and meet next-generation network upgrade requirements. Rosenberger’s structured and modular product design and configuration not only match existing networks but also enable economical upgrades to next-generation networks.

Fibre type: OS2 9/125 µm singlemode / OM3-OM4 multimode; Operating wavelength: 1310 / 1550 nm; Minimum bend radius: 7.5-15 mm; Insertion loss: <= 0.3 dB; Return loss: >= 50 dB UPC / >= 60 dB APC; Connector styles: LC / SC / MPO; Cable attenuation: <= 0.35 dB/km at 1310 nm; Operating temperature: -40 °C to +85 °C; Applicable standard: IEC 61753-1

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

A high-speed interconnect product line for data centres in the AI era, covering ultra-high-count fibre solutions and direct attach copper/active copper/active electrical cable (DAC, ACC, AEC) products, providing a high-density, low-latency interconnect foundation for intelligent computing clusters and hyperscale data centres.

For AI intelligent computing cluster interconnection; ultra-high-count fibre solutions; DAC direct attach copper, ACC active copper and AEC active electrical cables; high-density, low-latency interconnection

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Pyxis is an efficient intelligent infrastructure management system (iIMS) that combines dedicated hardware and software in its technical and management approach, effectively planning and managing IT infrastructure elements such as overall system network connections, equipment rack space, cabinet power supply status and video surveillance in real time. Besides ensuring normal network communications, Pyxis iIMS also acts as an intelligent infrastructure configuration and management tool, delivering more efficient maintenance and management through intelligent process control; by continuously adopting this advanced IT infrastructure management model, enterprises can greatly increase their return on IT investment (ROI).

Product series composition: Pyxis system overview, intelligent monitoring host, intelligent management unit, intelligent copper patch panel, intelligent modular optical patch panel and intelligent all-in-one optical patch panel; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

EDA cabling for equipment cabinets in data centres; optical-copper hybrid application scenarios

1HU and 4HU modular optical patch panels for optical backbone connection and patch management in MDA, IDA or HDA distribution areas; 1HU, 4HU modular optical patch panels for optical backbone connection and patch management in MDA, IDA or HDA distribution areas; the 1HU, 4HU modular optical patch panels are designed for standard 19-inch racks and used for optical backbone connection and patch management in MDA, IDA or HDA distribution areas; the Vela 1HU 96-core patch panel can be installed in cable trays and standard cabinets in MDA, IDA or HDA distribution areas of data centres; the modular design with mounting brackets allows installation both on cable trays and inside cabinets

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Connectors recommended by EN 50173 with mechanical locking structure, compliant with TIA/EIA 568 and IEC 874-10

Connectors recommended by EN 50173 with mechanical locking structure, compliant with TIA/EIA 568 and IEC 874-10; connectors recommended by EN 50173 with push-pull mechanical locking structure, compliant with TIA/EIA 568 and IEC 874-14; technical conditions compliant with IEC 61754-13, threaded coupling mechanism, ferrule geometry: spherical, FC-APC angle: 8 degrees; HDCS CAT.6A LAN cable patch cords dedicated to structured cabling, transmitting voice, data and video signals and supporting high-bandwidth applications now and for a long time to come, particularly suited to Class Ea solutions; CAT.6A LAN cables dedicated to structured cabling, transmitting voice, data and video signals and supporting high-bandwidth data services now and for a long time to come, particularly suited to Fast Ethernet protocol transmission at all performance classes

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

HSD cable-end connector, right-angle female, single cavity, non-waterproof, cable outlet downwards

Product series composition: FAKRA, HFM, HSD, MTD, H-MTD and AMEC; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

FAKRA cable assembly, straight male single cavity + cable + straight male single cavity

Product series composition: FAKRA cable assemblies, HFM cable assemblies, HSD cable assemblies, MTD cable assemblies, H-MTD cable assemblies and RoPD cable assemblies; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

High-voltage fuse, straight jack, adaptor

Product series: HVR® 260 three-pole high-voltage connector; Number of poles: 3; Rated voltage: 1000 V DC; Rated current: 270 A continuous; Cable cross-section: 35-70 mm²; Shielding: collective 360° shielding; Contact resistance: <= 0.5 mΩ; Insulation resistance: >= 500 MΩ; Ingress protection: IP67 / IP6K9K; Operating temperature: -40 °C to +140 °C; Mating cycles: >= 100

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

Rosenberger’s magnetic connector product line is based on magnetic self-centring and automatic attraction structures that achieve reliable connections in confined spaces, blind-mate conditions and scenarios requiring rapid disconnection, covering the RoPD power-data connector and the MagCode series.

Magnetic self-centring structure; supports blind mating and rapid disconnection; covers data, power and combined data-power transmission versions

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

In industrial manufacturing, efficient factory testing is essential when pursuing the tightest tolerances, maximum repeatability, high precision and quality, and a long production life cycle. Moreover, by minimising replacements, making test procedures programmable and reducing recalibration, calibration tools help cut manufacturing costs.

Product series composition: coaxial calibration kits, portable calibration tools, verification tools and metrology tools; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Network analyser port test cables offer excellent phase and amplitude stability; Rosenberger supplies both customised products and standard sets. The standard set contains two cable assemblies of 60 cm standard length and comes in a fine wooden case.

High-performance RF cables with frequencies up to 110 GHz, suitable for 5G antenna testing, 400G optical module testing, chip testing and other industrial test and measurement applications; Rosenberger also supplies low-frequency flexible cables with a frequency range of DC-18 GHz.

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Rosenberger can supply RF precision adapters with standard interfaces, both within-series and between-series.

Product type: in-series and between-series RF precision adapters; Frequency range: DC to 110 GHz; Interface sizes: SMA / 2.92 mm / 2.4 mm / 1.85 mm; VSWR: <= 1.25; Insertion loss: <= 0.3 dB; Return loss: >= 20 dB; Housing material: passivated stainless steel / gold-plated beryllium copper; Mating cycles: >= 500; Operating temperature: -55 °C to +155 °C

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Rosenberger precision connectors include connectors and mating cable connectors. Interface types: search the products; RPC-N, RPC-TNC, RPC-7, RPC-SP, RPC-3.50, RPC-2.92, RPC-2.40, RPC-1.85, RPC-1.35, RPC-1.00 and RPC-0.80. Product features: premium raw materials such as stainless steel and beryllium bronze; good durability; high precision; 100% mechanical and electrical testing

Product series composition: precision connectors; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Rosenberger offers a broad range of PCB connectors for demanding industrial testing. The portfolio includes many common standard series such as SMP, WSMP, Mini-SMP and SMA, as well as innovative coaxial series such as RPC-2.92, RPC-1.85 and RPC-1.0. For specific test and measurement applications Rosenberger develops and manufactures modular connectors for DC-50 GHz and solderless or SLC spring-contact connectors for ultra-high-frequency applications below 110 GHz (over 2500 mating cycles, 10 ps standard paired phase matching, various cable lengths). Rosenberger supplies precise pad dimensions to improve product performance.

Rosenberger modular connector systems cover DC-50 GHz and convert between different connection interfaces using a single connector; the Rosenberger RPC-1.00 connector (50 ohm, 1 mm inner diameter of the outer conductor) serves test and measurement up to 110 GHz; the SLC series features quick connection, high reliability, low wear and direct PCB interconnection, with frequencies of 18 GHz, 40 GHz and 70 GHz, and can be used on single-layer or multilayer boards with the signal layer on top; board-to-board connectors offer axial and radial tolerance (SMP, longwipe SMP, P-SMP, Mini-SMP, EBC, VIA, SMP Infinity); SMA/QMA/SMB/MCX/Mini-Coax board-end RF connectors can be customised on request; tape-and-reel packaging supports automated assembly

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing
• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Rosenberger codes: 60S101-KIMN1, 60S101-SIMN1, 60K101-KIMN1, 60S153-KIMN1, 53S160-KIMN1

Product series composition: handheld passive intermodulation analysers, desktop passive intermodulation analysers, cabinet passive intermodulation analysers, benchtop passive intermodulation analysers, PIM field passive intermodulation analysers and test accessories; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

With the widespread use of electrical and electronic equipment, electromagnetic pollution is intensifying. To reduce such pollution, shielding measures should be applied to all unit components throughout an electronic system, especially connecting cables and connectors, which requires a standardised measurement method. Compared with various shielding structures characterised by transfer impedance in mΩ/m or mΩ, users of RF cables, cable assemblies and connectors are also more concerned with shielding performance expressed in decibels (dB), i.e. shielding attenuation. The CoMeT test system is based on the internationally standardised triaxial measurement standard and uses a coupling test tube for comprehensive testing of cables, connectors and devices.

Product series composition: CoMeT 40 and CoMeT 90; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The Rosenberger power-data connection is a magnetic connection system. Besides conventional characteristics such as a high number of mating cycles, shock resistance and combined current, data, LAN and RF connections, magnetic connection also offers self-aligning magnets that prevent incorrect mating and are easy to clean, thus ensuring correct connection in the most difficult-to-reach positions. The "tear-off" function in particular prevents damage to the application caused by accidental disconnection.

Product series composition: magnetic USB, MultiMag multi-type magnetic connectors, RoDI data connectors, RoPD power-data connectors, magnetic XLR plugs, magnetic RJ45 connectors, PowerSystem magnetic products and custom magnetic 24-pin solutions; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

Non-magnetic products address applications sensitive to magnetism, such as MRI medical equipment environments, using non-magnetic materials and structures to avoid interfering with the magnetic field environment.

Non-magnetic materials and structure; avoids magnetic interference; suits connection requirements in magnetically sensitive environments

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

Rosenberger can provide customised solutions according to customer requirements and differences between industry applications in order to meet varying performance demands for waterproofing, shielding, signal loss, high insertion and removal cycles, hybrid configurations and high-temperature cleaning. Through in-depth exploration and learning in the medical and industrial fields, solutions such as connectors and cable assemblies are already available.

Product series composition: circular hybrid connectors; refer to the official product page and data sheets for detailed electrical, mechanical and environmental parameters

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

Rosenberger’s diverse product range covers a broad spectrum of optical communication testing and high-speed digital applications. To meet the constantly challenging technical requirements and growing test demands of the optical communication test equipment industry, Rosenberger develops and manufactures a series of coaxial connectors for PCBs, together with various multi-port miniature coaxial connectors, cable assemblies and probes for applications below 100 GHz. Rosenberger also undertakes custom work optimised for high-speed digital testing, designing high-density, low-loss, high-performance coaxial-to-PCB transitions and cable assemblies. Features: impedance 50 ohm; frequency range 110 GHz; high-density packaging, dimensions; multi-port quick mating.

Impedance: 50 ohm; frequency range: 110 GHz; temperature range: -40 °C to +115 °C

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

The ablation needle consists of a rigid needle with an integrated microwave antenna; this cable is inserted into diseased tissue in the body, and the key requirements are a small diameter, good mechanical strength and excellent cooling performance. Rosenberger leverages its design and processing strengths in RF and microwave energy transmission cable assemblies, combining the microwave source with the output connector; the result offers low loss and high power, and thanks to excellent production processes and a rigorous quality assurance system it safeguards signal transmission for ablation procedures. Energy transmission cable assembly features: high power, low loss; good stability; small relative bend radius with high flexibility; excellent shielding characteristics; the cable withstands high temperature, corrosion and ablation.

Customised cable assemblies; covering signal, power and imaging transmission; meeting the reliability and safety requirements of medical equipment

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

Rosenberger fibre-optic products can be used in sensor systems, data transmission in high-voltage systems, medical applications (MRT, laser), robotics, shipbuilding, offshore oil and gas drilling platforms, broadcasting, mining, aircraft and laser systems.

Fibre-optic transmission connection products; immunity to electromagnetic interference and galvanic isolation; supports high-bandwidth imaging and signal transmission

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

Rosenberger offers 8-pin connectors with high voltages up to 5000 V, based on a cost-effective standard D-SUB port design that can be fixed with fastening bolts; other high-voltage connectors are also available on request, for example MHV (High Voltage BNC), SHV (Safe High Voltage), HV 4-10 (High Voltage C), HN (High Voltage N) and Power Inserts DIN 41626-T1 & -T2 and D-Sub.

For high-voltage and power supply circuits of medical equipment; power connectors and assemblies; meeting the safety and reliability requirements of medical equipment

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

Rosenberger industrial circular connector product line, including M8 and M12 threaded locking circular connector series, aimed at sensor, actuator and equipment wiring on industrial automation sites and providing reliable interfaces for data and power transmission.

Threaded locking circular interface; includes M8 and M12 series; supports data and power transmission; suits industrial site cabling

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

RoProxCon non-contact data and power transmission products use non-contact (near-field) coupling to transmit data and power simultaneously without any physical contact, suiting industrial and medical scenarios that require wear-free, plug-free operation.

Non-contact coupling; simultaneous data and power transmission; wear-free and plug-free; suits industrial and medical equipment; microwave and millimetre-wave over-the-air bridging; withstands 200 W power transmission; supports sealed isolation and maintenance-free design

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT
• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

The HySpeedVision (HYV) machine vision connection solution carries power supply and high-speed data transmission over a single cable, achieving one-cable integration of the machine vision system and ensuring stable, low-latency operation in industrial environments.

A single cable carries both power supply and high-speed data transmission; suits convenient integration; designed for stable, low-latency operation in industrial environments

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Magnetic connectors offer a distinctive connection concept: Rosenberger has developed a product series that provides an intelligent alternative to mechanical docking. Our magnetic self-docking connector series has all the general functions and suits both power and data transmission. Self-docking principle: when the plug approaches the socket it is attracted by magnetic force and can almost slide into the socket by itself to complete the connection. This design is not only efficient and convenient to operate but also ensures an accurate connection. Efficient, reliable and convenient, magnetic self-docking connectors align automatically and prevent accidental disconnection, making them very suitable for scenarios that require frequent mating.

Cable assembly 0.35 mm², 1 RoDC male connector; cable assembly 0.35 mm², 1 RoDC female connector

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

The EBM expanded-beam multi-core fibre-optic connector uses expanded-beam fibre technology to significantly reduce sensitivity to dust, contamination and connection offset, maintaining stable multi-core optical connection performance in harsh environments.

Expanded-beam fibre technology; multi-core fibre connection; resistant to dust, particulate contamination and connection offset; suitable for long-term operation in harsh environments

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Single Pair Ethernet (SPE) product line for industrial and medical scenarios, based on differential connection systems such as RoSPE-HMTD, achieving high-speed data transmission and power supply over a single pair of wires while supporting long-distance transmission.

Single Pair Ethernet (SPE) differential connection; 360° full shielding structure; supports high-speed data transmission and long-distance links; industrial-grade compact housing

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Rosenberger RJ45 connectors are CAT5E-grade double-shielded Ethernet interfaces used to interconnect servers, switches and other equipment in data centers and office LANs with stable high-speed data transmission.

CAT5E; double-shielded twisted pair; 24AWG; 4 pairs; RJ45 to RJ45 interface

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Industrial electronics power connector product line, covering connectors dedicated to energy storage batteries, DC power connectors (50 A) and RJ45 power connectors, providing combined power and data connections for industrial equipment and energy storage systems.

Covers energy-storage battery dedicated connectors, DC power connectors/50 A and RJ45 power connectors; supports combined power and data transmission

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Rosenberger's smart-home measurement cable technology works with force, pressure, acceleration and torque sensors to capture physical quantities with high precision, meeting the cabling needs of smart-home and industrial sensing systems.

force/pressure/acceleration/torque measurement; highly insulated coaxial cable and connectors; insulation resistance greater than 10^14 ohm; high-insulation measurement chain

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Industrial Internet of Things (IoT-M2M) product line, centred on reliable device-to-device and machine-to-machine communication, providing connectors, cable assemblies and related connection solutions that support long-term stable operation on industrial sites.

For reliable IoT/M2M communication; provides connectors and cable assemblies; suits long-term stable operation on industrial sites

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Standard feeder cables cover coaxial feeder cables in various specifications for RF signal transmission in base station antenna feeder systems, balancing loss and cost.

1/4"R copper-conductor standard RF coaxial cable, foamed PE insulation, 50 ohm impedance, black UV-resistant jacket; 1/2"R aluminium-conductor standard RF coaxial cable, foamed PE insulation, 50 ohm impedance, black UV-resistant jacket; 1/4"S copper-conductor ultra-flexible RF coaxial cable, foamed PE insulation, 50 ohm impedance, black UV-resistant jacket; 1/2"R copper-conductor low-loss RF coaxial cable, foamed PE insulation, 50 ohm impedance, black UV-resistant jacket; 3/8"R copper-conductor standard RF coaxial cable, foamed PE insulation, 50 ohm impedance, black UV-resistant jacket

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Fixing devices that meet the different installation requirements of the coaxial cables, optical fibres and waveguides used in telecommunication systems.

Cable fixing clips for a range of cable diameters; single-hole/double-hole and pole-mounted types; suitable for feeder cables, leaky cables and composite optical-electrical cables

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Optical-electrical direct connection is a relatively traditional connection method that supports many mobile base station installation scenarios: whether the RRH/RRU is mounted at the tower top or on a building roof, fibre and power can be interconnected point-to-point from the base station to the RRH/RRU. The outdoor cable assemblies mainly used include LC-LC, RDC-LC, RQC-LC, RFE-LC and RMC-LC.

Base station FTTA outdoor optical connection; waterproof and dustproof structure; supports fast installation and maintenance

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Rosenberger optical distribution frames are used for splicing, terminating and storing optical cables. Rosenberger supplies both drawer-type and fixed-type products. The frames can be fitted with adapters compliant with various industry standards, including SC, FC, ST, LC, MU, MT-RJ, E2000, DIN and others. Rosenberger optical distribution frames can be installed in EIA-compliant 19-inch cabinets and multimedia network cabinets.

Optical cable termination and distribution; rack-mounted/wall-mounted structure; supports optical cable management, labelling and capacity expansion

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The Pyxis intelligent infrastructure management system is particularly suitable for data centres with relatively complex network structures, as well as for telecommunications rooms and equipment rooms that manage the network systems of various commercial buildings.

A hardware-software infrastructure management system; plans and manages network connections, rack space, cabinet power supply and video surveillance in real time; improves operations and maintenance efficiency through intelligent process control

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

For data centre optical backbone cabling, such as connecting MDA to IDA or HDA, and HDA to EDA or ZDA.

Factory pre-terminated and factory tested; plug and play on site; shortens cabling lead time and ensures link performance

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Rosenberger HDCS supplies customers with field-installable optical cables. The design exceeds the requirements of IEC 11801, EN 50173 and ANSI/TIA-568-C. Performance is determined by key factors such as attenuation and bandwidth. As light travels through the fibre, its intensity gradually weakens with distance, and signal attenuation is expressed in dB/km. A lower attenuation value ensures a longer transmission distance and keeps the system stable. Bandwidth is the parameter that measures data transmission capability; in general, this capability decreases as cable length increases. Multimode optical cables are specified by a bandwidth-length product expressed in MHz per km.

On the official website this series is presented mainly as model selection and installation compatibility guidance, covering 6 model(s); refer to the official product page/data sheets for detailed electrical, mechanical and environmental parameters

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Rosenberger low-loss, amplitude-stable and phase-stable high-performance RF cables reach up to 110 GHz and provide stable, reliable signal transmission for 5G antenna, 400G optical-module and chip industrial testing and measurement.

frequency up to 110 GHz; low loss; amplitude stability; phase stability; for 5G antenna testing, 400G optical module testing, chip testing

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Rosenberger precision connectors include connectors and mating cable connectors. Interface types: search the products; RPC-N, RPC-TNC, RPC-7, RPC-SP, RPC-3.50, RPC-2.92, RPC-2.40, RPC-1.85, RPC-1.35, RPC-1.00 and RPC-0.80. Product features: premium raw materials such as stainless steel and beryllium bronze; good durability; high precision; 100% mechanical and electrical testing

On the official website this series is presented mainly as model selection and installation compatibility guidance, covering 1 model(s); refer to the official product page/data sheets for detailed electrical, mechanical and environmental parameters

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The Rosenberger modular connector system uses a single connector to flexibly convert between different interface types, suited to RF test and measurement systems that frequently change interface configurations.

frequency range DC to 50 GHz; modular structure; single connector for multi-interface conversion; for RF testing and measurement

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The handheld passive intermodulation analyser offers multiple test functions including intermodulation testing, intermodulation localisation, standing wave testing, standing wave localisation and isolation testing. It meets the needs of fault diagnosis for outdoor base stations and indoor distributed systems, is small and light for easy carrying, and is powered by a replaceable lithium battery.

On the official website this series is presented mainly as model selection and installation compatibility guidance, covering 1 model(s); refer to the official product page/data sheets for detailed electrical, mechanical and environmental parameters

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The Rosenberger magnetic USB is the cleverest connection method since the invention of the USB flash drive.

On the official website this series is presented mainly as model selection and installation compatibility guidance, covering 1 model(s); refer to the official product page/data sheets for detailed electrical, mechanical and environmental parameters

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

FAchKReis Automobil: Rosenberger FAKRA RF connectors are specially designed to meet the demanding requirements of the automotive industry. Standard plastic housings with a sophisticated coding system provide 13 mechanical and colour codings plus one universal coding. Stamping and forming technology (SF) is being used increasingly. These precision-manufactured FAKRA-SF products are highly suitable for safe production and fully automated assembly, effectively ensuring a significant cost reduction. Rosenberger fully meets and responds to customer requirements, supplying finished products and custom parts designed to customer specifications.

Rosenberger FAKRA products comply with ISO 20860 as well as USCAR 17 and USCAR 18; single-cavity and multi-cavity plastic housings (single cavity 8 mm, double cavity 12.7 mm, double cavity, four cavities); operating temperature range from -40 °C to +105 °C

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

The automotive electronics RoPD power-data connector uses a magnetic self-centring structure to transmit power and data at high speed within a single interface, supporting blind mating and rapid disconnection.

Magnetic self-centring structure; simultaneous power and data transmission; supports blind mating and rapid disconnection; suits vehicle operating environments

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

FAKRA cable assemblies are finished harnesses matched to FAKRA RF connectors, used for vehicle antenna, GPS, Bluetooth and remote control RF links.

Cable assemblies matched to FAKRA connectors; factory termination and shielding treatment; suits vehicle RF links

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

Rosenberger multi-channel Mini-Coax solutions provide various multi-port coaxial connectors and cable assemblies for board-to-board interconnection at up to 40 GHz high-density board-level RF applications.

frequency up to 40 GHz; multi-port mini coaxial connectors; board-to-board applications; multi-channel cable assemblies

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

High-temperature resistant connectors are designed for high-temperature working environments, using temperature-resistant materials and structural design to maintain stable electrical and mechanical performance under high temperatures, and suit smart home and industrial equipment.

Temperature-resistant materials and structural design; maintains electrical and mechanical stability at high temperatures; suits smart home and industrial equipment

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

The Lyra intelligent micro data centre adopts a modular design concept to standardise and productise the entire infrastructure of a traditional small data centre inside a cabinet, integrating the power distribution system, cooling system, UPS, backup batteries, cabling system and power and environment monitoring management system of a data centre into a standard cabinet to achieve flexible configuration, on-demand deployment and intelligent management.

On the official website this series is presented mainly as model selection and installation compatibility guidance, covering 1 model(s); refer to the official product page/data sheets for detailed electrical, mechanical and environmental parameters; the Lyra series is abbreviated as RMDC (Rosenberger intelligent modular, mobile mini data centre)

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Rosenberger can provide customised solutions according to customer requirements and differences between industry applications, meeting varied performance demands for waterproofing, shielding, signal loss, high mating cycles, mixed configurations and high-temperature cleaning.

On the official website this series is presented mainly as model selection and installation compatibility guidance, covering 1 model(s); refer to the official product page/data sheets for detailed electrical, mechanical and environmental parameters

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

Rosenberger supplies several series of coaxial calibration kits for vector network analyser calibration. Each kit comes with laboratory calibration parameters, standard calibration products are delivered with factory calibration, and DAkkS-accredited laboratory calibration certificates compliant with DIN EN ISO 17025 can be provided on request.

Coaxial standards for vector network analyser calibration; covering multiple interface types and frequency ranges; high precision and high repeatability

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

A fast measurement system based on the triaxial method that precisely measures and analyses shielding leakage of cables and connectors.

On the official website this series is presented mainly as model selection and installation compatibility guidance, covering 1 model(s); refer to the official product page/data sheets for detailed electrical, mechanical and environmental parameters

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The Rosenberger HVR 25 is the smallest shielded connector in its class from Rosenberger: with a cable cross-section of 4 mm² it carries up to 40 A, delivering outstanding performance and a compact size while saving up to 50% in volume and cost. Technical characteristics: shielding, ambient temperature 85 °C, current-carrying capacity 10 A at 1.5 mm², 25 A at 2.5 mm², 40 A at 4 mm², operating voltage 1000 V DC, HVIL optional, vibration LV215 PG17-II, IP6K9K, IPXXB, IPXXD, operating temperature -40 °C to +125 °C, RoHS compliant. Applications: auxiliary electrical systems.

Current-carrying capacity at 85 °C ambient; 10 A at 1.5 mm²; 25 A at 2.5 mm²; 40 A at 4 mm²; operating voltage 1000 V DC; operating temperature -40 °C to +125 °C

• Auxiliary electrical consumers, e.g.
• PTC heaters
• All-in-one electric drive units
• On-board chargers (OBC)

The M8 series of industrial circular connectors uses the small M8 threaded locking interface for signal and power connections in space-constrained locations such as sensors and small actuators.

Small M8 threaded locking interface; supports signal and power transmission; suits industrial site installation and protection requirements

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

The MagCode magnetic connector uses magnetic attraction for alignment together with a safe release structure to achieve reliable power and data transmission in a miniaturised form factor, and is widely used in vehicles, industrial equipment and medical devices.

Magnetic attraction alignment; safe release structure; miniaturised design; supports power and data transmission

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Miniature design supporting connection of high-density network port equipment; fast and convenient field termination without special tools, in as little as 30 s; supports MPTL testing with performance meeting ANSI/TIA-568.2-E Cat.6A and satisfying 802.11ac Wi-Fi and 802.11ax Wi-Fi applications; supports POE++ power supply and complies with IEEE 802.3bt; patented contact spring design reduces arcing during POE hot plugging and increases reliability; 360-degree shielding structure; supports termination of conductor diameters from 22 to 26 AWG.

Supports MPTL testing with performance meeting ANSI/TIA-568.2-E Cat.6A and satisfying 802.11ac Wi-Fi and 802.11ax Wi-Fi applications; supports termination of conductor diameters from 22 to 26 AWG; supports Cat.5e, Cat6 and Cat6A shielded and unshielded applications

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

The connector dedicated to energy storage batteries addresses the electrical connection of energy storage battery packs and battery clusters, providing a reliable interface with high current and low contact resistance and meeting the safety and protection requirements for long-term operation of energy storage systems.

Connection interface dedicated to energy storage battery packs/clusters; high current carrying capacity; meets the safety and protection requirements of energy storage systems

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

The ultra-high-count fibre solution targets ultra-high-density data centres driven by AI and cloud computing, raising the fibre capacity per cabinet and per route through ultra-high-count optical cables and high-density patching systems.

For ultra-high-density data centres; ultra-high-count optical cables and high-density patching; raises fibre capacity per route

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

The feeder cable entry window seals and secures the wall penetration entry for feeder cables in base station equipment rooms, ensuring waterproofing and structural stability where the feeder cable passes through the wall.

Sealing and fixing of the feeder cable wall penetration entry; includes window frames and feeder window plugs; ensures waterproofing and structural stability at the wall penetration

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The RXC outdoor waterproof distribution box (Rosenberger X Connectivity) is designed specifically for indoor and outdoor splicing of multi-core optical fibre. It can connect base stations to RRHs, serve fibre-to-the-home FTTX, and support macro sites, small cell sites and indoor coverage cabling. It features a uniquely compact size, flexible mounting options and IP67 protection, and suits tower, pole, wall and roof mounting.

Multi-core optical/electrical centralised connection; improves installation efficiency and link density; suits base station outdoor environments

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Rosenberger optical cable splice closures are used to splice optical cables in fibre-optic networks, whether the cables are installed aerially, in ducts or directly buried. Rosenberger offers many types and structures of closures, all with excellent mechanical performance to suit complex installation environments.

Outdoor optical cable splicing protection; waterproof and moisture-proof sealing structure; suits different fibre counts and installation methods

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The intelligent monitoring host is the top-level device of the intelligent infrastructure; it uses point-to-multipoint communication to centrally monitor the working status of each intelligent management unit and to obtain, in real time, the monitoring information from the management units down to the underlying expansion devices.

Collects port, connection and environmental data; serves as the core hardware of the Pyxis iIMS; supports visualised management and alarms

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Building and campus backbone system connections; industrial-grade plant installation; data centre optical cable installation. Features and benefits: fast deployment and easy installation, reducing installation time; from factory to completed installation the cable is protected by safety devices, ensuring reliability; waterproof, deformation-resistant and impact-resistant installation conduits effectively protect the fibre and connector surfaces; cable splitters and installation protection tubes ensure a tensile strength greater than 500 N; the central loose tube and stranded loose tube structures provide good tensile strength and impact resistance; polyethylene (PE) jackets meet outdoor installation requirements; LSZH jackets comply with IEC 60332-3.

Fibre specification: 9/125 µm, 50/125 µm, 62.5/125 µm, OM3, OM4; Fibre count: 4 to 144 fibres; Jacket rating: LSZH low-smoke zero-halogen; Tensile strength: > 500 N with breakout and protection tube; Insertion loss: <= 0.35 dB; Return loss: >= 50 dB; Minimum bend radius: >= 20 x cable outer diameter; Protection: waterproof, deformation-proof and impact-resistant installation tubing; Installation temperature: -20 °C to +70 °C

• Building and campus backbone system connections
• Industrial-grade plant installation
• Data centre optical cable installation
• Features and benefits
• Fast deployment and easy installation, reducing installation time

MSO (three-in-one: open / short / load) and MSOT (four-in-one: open / short / load / through) mechanical calibration kits, small in size and easy to operate, supplied with a lanyard and a standard parameter card.

Portable structure; for calibrating vector network analysers and similar instruments; suitable for fast field and production line work

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Rosenberger low-frequency flexible cables combine flexibility with stable electrical performance, ideal for DC-to-18 GHz RF connections in laboratories, test equipment and space-constrained installations.

frequency range DC to 18 GHz; low frequency; flexible cable

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Rosenberger provides various ruggedised test port adapters for vector network analyser (VNA) test applications.

On the official website this series is presented mainly as model selection and installation compatibility guidance, covering 1 model(s); refer to the official product page/data sheets for detailed electrical, mechanical and environmental parameters

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Rosenberger offers a variety of solderless PCB connectors to meet test and measurement requirements. These PCB connectors are mounted conveniently with screws.

On the official website this series is presented mainly as model selection and installation compatibility guidance, covering 1 model(s); refer to the official product page/data sheets for detailed electrical, mechanical and environmental parameters

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Multi-type magnetic connectors are designed for small compact connector applications in tight spaces. Available designs include MultiMag 6 for USB and MultiMag 15 for general power and data transmission.

On the official website this series is presented mainly as model selection and installation compatibility guidance, covering 1 model(s); refer to the official product page/data sheets for detailed electrical, mechanical and environmental parameters

• Medical imaging and surgical equipment
• Patient monitoring devices
• Endoscopy equipment
• RF/microwave ablation therapy

High-speed FAKRA-Mini automotive connector system up to 20 GHz | 28 Gbps. The new Rosenberger HFM® connector system is the next-generation coaxial connector for the automotive industry with frequencies up to 20 GHz. Besides reducing weight and installation space, it also effectively lowers cost. This intelligent modular system enables high-speed data transmission up to 28 Gbps. Compared with conventional FAKRA, HFM® is smaller, so different components can be accommodated in a very small installation space, saving up to 80% of space. HFM® products and product features; cable-end connectors (straight and right-angle);

Automotive connector system up to 20 GHz | 28 Gbps; frequency up to 20 GHz; high-speed data transmission rate up to 28 Gbit/s; comparison of 12 FAKRA versus 3 quad-cavity HFM®; comparison of 4 FAKRA versus 1 quad-cavity HFM®

• Autonomous driving
• Driver assistance systems
• Navigation
• Infotainment systems
• Rear-seat entertainment systems

HVR® 50 connector system. Rosenberger HVR® 50 connectors are available in straight and right-angle versions. They include a secondary lock (CPA – connector position assurance) to prevent unintentional disconnection. Despite their small size, these connectors still achieve a current capacity of about 60 A at an ambient temperature of 85 °C. HVR® 50 connectors are mainly used in auxiliary units such as electric heating systems, air-conditioning units, DC/DC converters and battery charging.

Current capacity (6 mm²): 60 A at 85 °C; operating voltage 1000 V DC; test voltage 2700 V DC; temperature range -40 °C to +140 °C; compatible wire cross-sections 4 mm², 6 mm²; FHLR2G2GCB2G 4 mm² / 0.31 mm / LV216-2

• Electric heating
• Electric air conditioning
• Battery charging
• DC/DC converters

HVR® 200 connector system. Rosenberger HVR® 200 connectors offer an outstanding size-to-performance ratio, carrying 210 A at an ambient temperature of 85 °C while keeping the footprint very small. This connector is the ideal connecting element between battery and inverter or for installation in a power distribution unit (PDU). To meet the relevant installation or application requirements, the portfolio includes right-angle and straight board-end versions as well as straight cable-end versions.

Operating voltage 750 V DC; test voltage 2700 V DC; temperature range -40 °C to +140 °C; compatible wire cross-sections 16 mm², 25 mm², 35 mm²; FHLR2GCB2G 16 mm² / 0.21 mm; FHLR2GCB2G 25 mm² / 0.21 mm

• Battery link
• Battery distribution unit (BDU)
• Inverter

The MagCode® magnetic connection system consists of a MagCode® magnetic connector and a matching interface; magnetic attraction provides automatic alignment and reliable contact, together with a safe-release feature.

MagCode® magnetic connector system; automatic magnetic alignment; safe-release feature; supports data and power transmission

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

HFM® cable assemblies are finished harnesses matched to HFM® high-frequency, high-speed connectors and designed for vehicle wiring of automotive RF and high-speed data links.

Cable assemblies matched to HFM® connectors; factory termination and shielding treatment; suitable for automotive high-frequency and high-speed links

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

1/2" radiating leaky cable, foamed PE insulation, 50 ohm impedance, black flame-retardant jacket

1/2" radiating leaky cable, foamed PE insulation, 50 ohm impedance, black flame-retardant jacket; 7/8" radiating leaky cable, foamed PE insulation, 50 ohm impedance, black flame-retardant jacket; 1 1/4" radiating leaky cable, foamed PE insulation, 50 ohm impedance, black flame-retardant jacket; 1 5/8" radiating leaky cable, foamed PE insulation, 50 ohm impedance, black flame-retardant jacket

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The benchtop passive intermodulation analyser is a compact, highly integrated intermodulation analyser that measures the intermodulation distortion of connectors, cable assemblies, antennas, filters, tower-mounted amplifiers and other passive devices quickly and accurately.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Rosenberger multi-channel SLC spring-loaded contacts compensate for board-spacing errors through resilient contacts, reliably transmitting RF signals even when board spacing tolerance exceeds 0.6 mm, ideal for automated blind-mate assembly.

SLC spring-loaded contacts; board-spacing tolerance greater than 0.6 mm; normal RF signal transmission; resilient-contact compensation

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscope equipment
• RF/microwave ablation therapy

Rosenberger sensor connectors and assemblies pair with force, pressure, acceleration and torque sensors, providing highly insulated coaxial connections that keep the entire measurement chain's insulation resistance above 10^14 ohm.

force/pressure/acceleration/torque sensor interfaces; highly insulated coaxial cable and connectors; insulation resistance above 10^14 ohm; high-insulation measurement chain

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

The Rosenberger HDCS® high-density modular fibre patch panel generally supports various fibre modules applied to fibre cross connection in a data centre main distribution area or in a gathering point in a building, with the advantages listed below.

Modular high-density structure; supports fibre termination and distribution at the backbone and aggregation layers; facilitates capacity expansion and operation and maintenance

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Rosenberger quick-lock connectors feature a special coupling mechanism that enables fast, simple and reliable connection in confined spaces without tools.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Enables effective measurement and analysis of the surface transfer impedance of large connectors and shielded power cables.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Industrial M12 series circular connector with the industry-standard M12 threaded locking interface, providing a standardised signal, data and power connection solution for industrial automation equipment.

M12 threaded locking interface; supports signal, data and power transmission; suitable for industrial on-site installation and protection requirements

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

RoPD® magnetic connectors (MagCode® family) integrate power and data paths on a magnetic connection basis, providing a mis-mating-proof, blind-mateable connection experience.

Magnetic connection; integrated power and data paths; mis-mating proof and blind mateable

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

The RJ45 power connector (industrial electronics) combines data and power transmission for single-cable power supply and communication of industrial on-site network equipment.

RJ45 interface with integrated power; combined data and power transmission; industrial-grade mounting format; suitable for industrial and security scenarios

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

The DC power connector / 50 A is used in DC supply circuits of industrial equipment, with a rated current of approximately 50 A, providing a robust and reliable DC power interface.

DC power connection; rated current approx. 50 A; suitable for DC supply circuits of industrial equipment

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Rosenberger’s data centre high-speed interconnect copper cable line-up includes DAC direct-attach copper cables, ACC active copper cables and AEC active electrical cables, used for high-speed port interconnection within a rack and between adjacent racks, balancing transmission distance and cost.

Product forms: DAC direct-attach copper cable, ACC active copper cable, AEC active electrical cable; for switch-to-server and server-to-server high-speed port interconnection; selected according to data centre Ethernet rate grades

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

N-type straight male to N-type straight male, compatible cable type: 1/2" super-flexible, FRNC jacket

This series on the official website focuses on model selection and installation adaptation notes and covers 55 models; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The SiSo connector is a miniaturised connector product for base station antenna feeder systems, used for base station RF link connections and ensuring low intermodulation and stable electrical performance.

Connector for base station antenna feeder systems; miniaturised structure; low passive intermodulation (PIM); suitable for base station RF links

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The FTTA hybrid optical-power series includes optical and electrical conductors in the same cable for connecting base stations and RRUs, which simplifies installation, saves installation cost and also saves effective installation space.

Integrated hybrid optical-power cable connection; simultaneous optical and electrical connection; reduced cabling and installation workload

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Rosenberger’s fibre distribution unit (FDU) can be flexibly configured in capacity and interface type according to customer requirements. Rosenberger offers both indoor and outdoor FDUs. Distribution cables and drop cables are interconnected via the fibre distribution unit (FDU), which is an important part of the optical distribution network (ODN).

Optical signal distribution and fibre splitting; built-in splitter mounting position; supports multi-subscriber access

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Cables and cable assemblies. Rosenberger offers a comprehensive range of assembled cables for the communication, automotive and test technology sectors. Whether RF cable assemblies for large-scale production, low-cost cables, very rugged cables for outdoor applications, price-advantaged laboratory test cables or high-precision test and metrology cables, our first priority at Rosenberger is the careful selection of the highest-quality materials and the best technologies. We develop high-end products specifically for customers involved in cable assembly and define and adapt our manufacturing processes accordingly. A high rate of innovation in product development continuously drives the advancement and improvement of assembly technology. Automated cable assembly: fully automated cable assembly starts at the product development stage. The structural design of the cable assemblies is thoroughly considered,

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• UTIFLEX microwave cables

Management unit: an expansion unit in the intelligent electronic patch panel system that uses point-to-multipoint communication to centrally monitor the operating status of patch panel scanning modules, acquire monitoring information from subordinate expansion devices in real time and promptly report port link information, port status anomalies and device presence detection information to the monitoring host.

Real-time acquisition of patch port and link status; works with the intelligent patching system; provides data support for operation and maintenance management

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

1HU and 4HU modular fibre patch panels are used for fibre backbone connection and patching management in MDA, IDA or HDA distribution areas. Product features: ergonomic design; the 1HU/4HU versions can accommodate 12/48 NormaTM module cassettes or adapter panels respectively. The maximum density of 1HU reaches 144 fibres (LC connectors) and 576 fibres (MPO connectors); the maximum density of 4HU reaches 576 fibres (LC connectors) and 2304 fibres (MPO connectors). 12-fibre MPO-LC modules and adapter front panels are available for flexible configuration. Pre-terminated fibre modules are classified according to the type of internal branch fibre into multimode 50/125 μm OM2, OM3, OM4,

1HU, 4HU modular fibre patch panels are used for fibre backbone connection and patching management in MDA, IDA or HDA distribution areas.; 9/125 μm, single-mode bend-insensitive G657A 9/125 μm and other types; storage temperature range: -40 °C to 70 °C; operating temperature range: -20 °C to 60 °C

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Verification tools are used for the verification and validation of RF test links, helping to confirm the status of the test system and the reliability of measurement results.

RF test link verification; confirmation of test system status; used together with calibration and metrology processes

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Vector network analyser port test cables offer excellent phase and amplitude stability, and Rosenberger supplies both customised products and standard sets. A standard set contains two cable assemblies of 60 cm standard length and comes in a fine wooden case.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Rosenberger waveguide-to-coax adapters perform low-loss signal conversion between waveguide and coaxial interfaces up to 110 GHz, widely used in millimeter-wave test and measurement systems.

frequency up to 110 GHz; waveguide to coaxial; low-loss transmission

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The Mini-coax coaxial connector belongs to Rosenberger’s test and measurement product family; the official website product library lists 1 model in this series.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The rack-mounted passive intermodulation analyser uses a modular design: customers can choose one or several frequency bands as required. It uses a standard 19-inch rack with ample space for future upgrades and is easy to move.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

High-Speed Data connector. Rosenberger has developed an interconnect system with uniform impedance control for high-speed data transmission (RosenbergerHSD®). This is a high-performance digital system for low-voltage differential signals that prevents interference from crosstalk and external sources. Rosenberger HSD is a 100 ohm fully shielded interconnect system using shielded twisted-pair four-core cable. RosenbergerHSD® available versions:; RosenbergerHSD® – shielded single-cavity, dual-cavity and waterproof versions;

Differential high-speed data transmission; shielded structure; suitable for automotive harness and installation requirements

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

The Rosenberger HVR 260 three-pole connector system targets collective-shielded applications and carries continuous currents up to 270 A, used for high-voltage connections to electric-vehicle drive motors.

3 poles; continuous current 270 A; collective shielding application; for motor connection

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

HSD cable assemblies are finished harnesses matched to HSD high-speed data connectors; they complete the termination and shielding treatment of connector and cable and are used for high-speed data links throughout the vehicle.

Cable assemblies matched to HSD connectors; factory termination and shielding treatment; customised to vehicle wiring requirements

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

For board-to-board applications at 40 GHz/67 GHz. Rosenberger multi-port Mini-SMP is designed to achieve high-performance, highly reliable, low-wear connections. It provides perfect signal integrity for printed circuit boards at frequencies up to 67 GHz. Compression mounting on the circuit board avoids signal distortion and makes transmission efficient.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscope equipment
• RF/microwave ablation therapy

Patch cord applications; interconnection of fibres between patch panels; connection between peripheral equipment and fibre patch panel interfaces, features; outer jacket material options OFNR, OFNP or LSZH; the supplied patch cord cables have the following structures: simplex, duplex, miniature zipcord cable, multi-core breakout cable, ribbon cable fibre/cable; on request, various types of optical cable can also be supplied, such as OS2, OM2, OM3, OM4 and OM5 connection systems; Rosenberger patch cords can be supplied with the following connector types: ST, SC, FC, LC, MU, MTRJ, MTP, MPO, ESCON, SCDC, E2000, DIN and other packaging;

Transport and storage temperature: -25 °C to +70 °C; operating temperature: -5 °C to +70 °C

• Interconnection of fibres between patch panels
• Connection between peripheral equipment and fibre patch panel interfaces
• Features
• Outer jacket material options OFNR, OFNP or LSZH
• The supplied patch cord cables have the following structures: simplex, duplex, miniature zipcord cable, multi-core breakout cable, ribbon cable

RoDC® magnetic DC connectors are aimed at DC power supply scenarios: magnetic attraction provides reliable mating and quick release, making them suitable for charging and powering small DC devices.

Cable assembly 0.35 mm², 1 RoDC male connector; cable assembly 0.35 mm², 1 RoDC female connector

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Rosenberger CAT5E RJ45 Ethernet patch cords use a double-shielded twisted-pair construction for high-speed Ethernet interconnection between devices in server rooms and structured office networks.

CAT5E; double-shielded twisted pair; 24AWG; 4 pairs; RJ45 to RJ45 patch cord

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

The EBO expanded-beam optical connection solution (Expanded Beam Optical, EBO) addresses the weak points of conventional connectors in contaminated, vibrating and stressed environments and provides highly reliable expanded-beam optical connections. Thanks to expanded-beam technology, EBO is significantly less sensitive to dust, contamination and connection offset, maintaining stable optical performance even in harsh environments. Designed for mission-critical scenarios, it is suitable for industrial automation, robotics, security, rail transport and advanced sensing. With durability and operational reliability as its core design goals, EBO delivers consistent, reliable optical connection performance in environments where conventional optical interfaces struggle. Stable and reliable optical performance,

This series on the official website focuses on model selection and installation adaptation notes and covers 2 models; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

The surge arrester provides lightning protection for base station antenna feeder systems, suppressing the effect of lightning surges on RF links and equipment and ensuring safe site operation.

DIN female to DIN male, frequency range: 698 MHz-2700 MHz; DIN female to DIN male, frequency range: 698 MHz-2700 MHz

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Rosenberger’s fibre distribution unit (FDU) can be flexibly configured in capacity and interface type according to customer requirements. Rosenberger offers both indoor and outdoor FDUs. Distribution cables and drop cables are interconnected via the fibre distribution unit (FDU), which is an important part of the optical distribution network (ODN).

Terminal optical cable distribution and termination; supports multi-subscriber access; available in indoor and outdoor mounting versions

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The main function of the intelligent copper patch panel scanning module is to scan all copper cable ports on the patch panel in real time and upload the scan information to the management unit for processing. The intelligent scanning module itself has no power supply and is powered by the management unit.

Intelligent detection integrated into copper patching; real-time monitoring of port connection status; supports link management and alarms

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Fibre-optic connectors are used for fibre termination in structured cabling systems; standard interface fibre-optic connector products are offered to ensure the optical performance of the link.

Connector recommended by EN50173, mechanical locking structure, compliant with TIA/EIA 568 and IEC 874-10; connector recommended by EN50173, push-pull mechanical locking structure, compliant with TIA/EIA 568 and IEC 874-14; technical conditions compliant with IEC 61754-13, threaded screw coupling, ferrule end-face geometry: spherical, FC-APC angle: 8°

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Rosenberger calibration tools perform precise metrology and calibration of RF parameters, working with standards to build a laboratory traceability system that ensures the accuracy and consistency of test equipment.

RF parameter metrology; used with standards; measurement traceability; laboratory metrology system support

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The Rosenberger SLC spring-loaded contact series supports fast connection, high reliability and low wear, and connects directly to PCBs, suited to single- or multi-layer boards with signal layers on the top side.

fast connection; high reliability; low wear; direct PCB interconnect; frequencies 18 GHz/40 GHz/70 GHz; for top-signal-layer single and multilayer boards

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The desktop passive intermodulation analyser is suitable for production lines and tests the intermodulation of various passive devices; it is usually single-band.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

HVR 300® connector system. Rosenberger HVR® 300 connectors not only provide a maximum current capacity of 320 A but also take up very little space. The HVR® 300 series includes cable-end connectors with a two-hole right-angle design for 70 mm² shielded cable and the corresponding board-end connectors, with 50 mm² cross-sections available on request. They are secured with a pull bar and a secondary lock (CPA – connector position assurance) to prevent accidental disconnection.

Current capacity (70 mm²): 320 A at 85 °C; operating voltage 1000 V DC; test voltage 4200 V DC; temperature range -40 °C to +85 °C; IP rating (mated) IP6K9K / IP6K6K / IP6K7; compatible wire cross-sections 70 mm², (50 mm² on request)

• High-current applications

MTD® cable assemblies are finished harnesses matched to MTD® unshielded automotive Ethernet connectors and are used for vehicle wiring of automotive Ethernet links.

Cable assemblies matched to MTD® connectors; for unshielded automotive Ethernet; factory termination and customised lengths

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

Multi-channel WSMP belongs to Rosenberger’s medical electronics product family; the official website product library lists 1 model in this series.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscope equipment
• RF/microwave ablation therapy

The Vela high-density fibre patch panel provides modular high-density fibre termination and management capability, accommodating more fibre ports within a given rack space.

Product type: modular Vela high-density fibre patch panel; Rack height: 1 HU / 4 HU; 1 HU capacity: up to 144 LC fibres; Fibre compatibility: OS2 / OM3 / OM4; Coupler type: LC duplex / MPO; Application areas: MDA / IDA / HDA; Material: cold-rolled steel with powder coating; Fully loaded weight: <= 18 kg; Operating temperature: -40 °C to +70 °C; Rack standard: IEC 60297-19

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Base station power cable assemblies provide finished cable assemblies for base station DC power supply; they complete termination and protective treatment and meet the power supply and installation requirements of outdoor sites.

Finished cable assemblies for base station DC power supply; factory termination and protective treatment; suitable for outdoor site installation

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The earthing kit is suitable for feeder systems and protects system equipment from lightning damage.

Earthing protection kit for base station sites; includes earthing clamps and earthing wires; suitable for site installation and lightning earthing

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Rosenberger fibre optic faceplate boxes are mainly used as the subscriber-side interface in fibre-to-the-desk (FTTD) scenarios. Specially designed to support FTTH drop cables, they have a unique internal structure that can store excess cable and guarantee a sufficient bending radius. Rosenberger fibre optic outlets can splice cables in three ways: fusion splicing with a splicer, cold splicing with a fibre optic fast connector, or mechanical connection using a fibre optic adapter.

Indoor fibre optic terminal information point; wall or desk mounting versions; used together with patch cords and adapters

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The main function of the intelligent modular optical patch panel is patching management for fibre products; a chip in the intelligent optical module scans every optical port and sends information to the management unit in real time, so that the intelligent management software can monitor the status of every optical port in real time.

Modular high-density structure; integrated intelligent detection; real-time identification of port and link status

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

The 1HU and 4HU modular fibre patch panels are designed for standard 19-inch racks and are used for fibre backbone connection and patching management in MDA, IDA or HDA distribution areas. Product features: high-density, modular design saving rack space and simplifying expansion and maintenance. The 1HU space can accommodate 4 optical modules, achieving a high-density configuration of up to 96 fibres with LC interfaces and 384 fibres with MTP/MPO interfaces. The 4HU space can accommodate 12 optical modules, achieving a high-density configuration of up to 288 fibres with LC interfaces and 1152 fibres with MTP/MPO interfaces. Modules of various types and densities are available, such as MTP/MPO-LC, MTP/MPO-MTP/MPO and LC-LC,

1HU, 4HU modular fibre patch panels are designed for standard 19-inch racks and are used for fibre backbone connection and patching management in MDA, IDA or HDA distribution areas; MTP/MPO-LC module attenuation (typical): single-mode 0.5 dB, multimode 0.4 dB • storage temperature range: -40 °C to 70 °C; operating temperature range: -20 °C to 60 °C

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

The fibre-optic adapters are used to link fibre optic connectors terminated on a fibre optic cable and are usually mounted in 19" patch panels and wall outlets. HDCS® adapters provide a reliable, low insertion loss interconnection.

Fibre optic connector mating and coupling; multiple interface types; low insertion loss

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

The Rosenberger RPC-1.00 precision connector is rated 50 ohm with a 1 mm outer-conductor inner diameter, intended for test and measurement up to 110 GHz, ideal for high-frequency VNA and similar scenarios.

impedance 50 ohm; outer conductor inner diameter 1 mm; frequency up to 110 GHz; RPC-1.00 connector; test and measurement

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The Rosenberger PIMα field passive intermodulation analyser is a compact, band-switchable intermodulation analyser for fault location. It uses a wideband transmitter and receiver to support testing in multiple frequency bands; replaceable filter modules allow the band to be changed on site, and it offers a range of test functions.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Modular Twisted-Pair Data – modular twisted-pair data connector – Ethernet applications. The Rosenberger MTD® connection system is an Ethernet transmission system using sheathed twisted-pair cable. It is characterised by low cost, low weight and small dimensions. The MTD® system meets the high specifications of vehicle manufacturers. Compared with existing solutions on the market, the characteristic-impedance-controlled transition zone of the cable-to-connector interface offers significant advantages. Its small dimensions allow multiple wire pairs to be accommodated in a confined installation space. The honeycomb structure provides low crosstalk and good symmetry and allows modular expansion. The design is ergonomically suitable and offers excellent operating and electrical system performance.

Product series: MTD® modular twisted-pair data connector; Applicable cable: shielded twisted pair; Data rate: 100 Mbps / 1 Gbps; Pin layout: 2 pairs / 4 pairs; Characteristic impedance: 100 Ω; Insertion loss: <= 0.2 dB at 100 MHz; Mating cycles: >= 25; Wire size: AWG 22-26; Operating temperature: -40 °C to +105 °C; Applicable specification: USCAR2

• The Rosenberger MTD® connection system is an Ethernet transmission system for sheathed twisted-pair cables in vehicles.
• Meets high automotive specifications such as USCAR2.
• MTD® – assembly process
• 1. Cutting and stripping the cable jacket and cores
• 2. Crimping the terminal (centre terminal)

High-Speed Modular Twisted-Pair Data – high-speed modular twisted-pair data connector. Automotive connector system up to 20 GHz | 28 Gbps. Rosenberger H-MTD® is a 360° fully shielded differential connector system. It combines high-performance data transmission (up to 20 GHz or 28 Gbps) with a high-strength, small-volume automotive-grade plastic housing. Rosenberger H-MTD® supports high-bit-rate data transmission while saving installation space and weight. A major advantage of the system is its modularity, which gives it broad application coverage. H-MTD products; H-MTD® cable-end connectors, single cavity,

Automotive connector system up to 20 GHz | 28 Gbps; Rosenberger H-MTD® is a 360° fully shielded differential connector system. It combines high-performance data transmission (up to 20 GHz or 28 Gbps) with a high-strength, small-volume automotive-grade plastic housing.; compliant with LV214/USCAR automotive-grade differential connectors; high-frequency H-MTD® interface, up to 15 GHz / 20 Gbps; – 100BASE-T1; – 1000BASE-T1

• 4K camera systems
• Autonomous driving
• Radar
• LiDAR
• 4K high-resolution displays

HVR® 420 connector system. HVR® 420 connectors are highly compact and offer the highest current capacity in the Rosenberger portfolio. Even a 95 mm² cross-section can safely carry 420 A, and at 85 °C up to 450 A is achievable with a maximum cable cross-section of 120 mm² on request. An additional secondary lock (CPA – connector position assurance) prevents accidental disconnection. Typical applications include charging electric vehicle batteries of up to 450 kWh.

Current capacity (120 mm²): 450 A at 85 °C; operating voltage 1000 V DC; test voltage 2500 V DC; compatible wire cross-sections 35 mm², 70 mm², 95 mm², (120 mm² on request); dual board-end in design (test voltage 4300 V DC); maximum performance up to 450 A

• Charging and ultra-fast charging of electric vehicles

H-MTD® cable assemblies are finished harnesses matched to H-MTD® shielded/unshielded high-speed differential connectors and support automotive Ethernet and SerDes high-speed links.

Cable assemblies matched to H-MTD® connectors; suitable for shielded and unshielded twisted-pair cables; supports automotive Ethernet and SerDes links

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

Base station power connectors are used for the DC power supply interface of base station equipment; they provide a reliable power connection and meet the protection requirements of outdoor environments.

Base station DC power supply interface; reliable power connection; meets outdoor environmental protection requirements

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Rosenberger offers field-installable fibre optic connectors in three specifications for SC, FC and LC adapters. Based on Rosenberger’s state-of-the-art rapid pre-termination technology, this connector guarantees extremely high mechanical and optical performance, matching or exceeding factory-assembled connectors. It is widely used in FTTx network deployment.

Field-assembled fibre optic connector; no fusion splicing process required; improves deployment and maintenance efficiency

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The main function of the intelligent all-in-one optical patch panel is patching management for fibre products; a chip in the intelligent optical module scans every optical port and sends information to the management unit in real time, so that the intelligent management software can monitor the status of every optical port in real time.

Integrated all-in-one structure; built-in intelligent detection; raises the level of automation in link management

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

The Vela 1HU 96-fibre patch panel can be installed on cable trays and in standard racks in the MDA, IDA or HDA distribution areas of a data centre. The product uses a modular design and is supplied with mounting brackets, so it can be installed either on a cable tray or inside a rack.

Product type: Vela cable-tray high-density fibre patch panel; Rack height: 1 HU; Port capacity: 96 fibres; Mounting: cable-tray mounting / standard rack mounting with brackets; Structure: modular front-plate design; Coupler type: LC duplex / MPO; Material: cold-rolled SPCC steel with powder coating; Application areas: MDA / IDA / HDA; Net weight: <= 12 kg; Operating temperature: -40 °C to +70 °C

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

The growing bandwidth and security requirements of local area networks (LAN) are ultimately driving the transition from copper to fibre solutions. In future applications, not only will fibre optic cables be used in campus and building hubs, but fibre to the desk (FTTD) will also become one of the mainstream solutions. The term fibre to the desk (FTTD) describes horizontal cabling in data transmission and communication, running from the floor distribution room to the interface at the work position. In ISO/IEC 11801 and EN50173 this belongs to the third level.

Fibre extended to the office desk; includes terminal boxes, patch cords and adapters; supports high-bandwidth terminal access

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

The RF performance and quality of surface-mount connectors depend on various parameters such as substrate thickness and board layer count. Professional solutions and recommendations can be provided for customer-specific applications.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

Rosenberger codes: 60S101-KIMN1, 60S101-SIMN1, 60K101-KIMN1, 60S153-KIMN1, 53S160-KIMN1

This series on the official website focuses on model selection and installation adaptation notes and covers 5 models; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyser testing
• Optical module testing

The Aptiv and Rosenberger AMEC connectors will be 100% compatible, giving customers a fully approved second source.

This series on the official website focuses on model selection and installation adaptation notes and covers 1 model; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

HPK connector. The Rosenberger HPK system reaches 275 A at voltages up to 1000 V. Thanks to its outstanding vibration and current performance, the HPK connector is ideally suited to typical high-voltage electric vehicle applications such as connections between battery, inverter and PDU. The series includes single-hole, two-hole and three-hole connectors that offer great flexibility and can be used with copper or aluminium cables in four different cable cross-sections. Right-angle cable couplers with or without HVIL (high-voltage interlock) and the corresponding headers are available as options.

The Rosenberger HPK system reaches 275 A at voltages up to 1000 V. Thanks to its outstanding vibration and current performance, the HPK connector is ideally suited to typical high-voltage electric vehicle applications such as connections between battery, inverter and PDU.; current capacity (50 mm²): 275 A at 85 °C; operating voltage 1000 V DC; test voltage 3200 V DC; temperature range -40 °C to +140 °C; compatible wire cross-sections (copper) 16 mm², 25 mm², 35 mm², 50 mm²

• Battery
• Inverter
• Power distribution unit (PDU)

RoPD® cable assemblies are finished cables matched to RoPD® power-data connectors; they are terminated and assembled according to vehicle application requirements to ensure the overall performance of the connection system.

Cable assemblies matched to RoPD® connectors; factory termination and assembly; lengths and specifications customised to vehicle application requirements

• High-voltage battery and electric drive systems of new energy vehicles
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

Rosenberger offers PLC optical splitter modules in a wide range of specifications; their main function is to split the signal in the downstream direction and to aggregate signals in the upstream channel. TDM technology is used downstream, while RDM-related access protocols are used upstream. Rosenberger designs, manufactures and supplies multiple formats, including modular, 19" rack-mounted and standalone versions, to suit different application scenarios. The planar lightwave circuit (PLC) optical splitter is an optical power management device that uses silica optical waveguide technology. It is small, highly reliable and offers good channel uniformity, and is widely used in PON networks (including EPON and GPON), cable television networks and FTTx access networks (including FTTH,

PLC planar lightwave splitting technology; multiple split ratios and package formats; low insertion loss and high uniformity

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Provides optical cables with LC connectors between equipment and MTP/MPO pre-terminated optical cables, and equipment interconnection between MTP/MPO connectors, for use in data centre MDA, HDA and EDA areas, physically converting 40G into 4×10G or 100G into 4×25G.

MTP/MPO-to-LC breakout structure; factory pre-termination and testing; supports high-density backbone distribution

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

HDCS® fibre patch panels are mounted in standard 19-inch network cabinets and can be installed pre-terminated or field-spliced; in particular, they can be used together with Rosenberger’s patented pre-terminated optical cable system.

Fibre link termination and distribution; rack-mounted structure; supports standardised operation, maintenance and expansion

• Data centre network cabling
• Enterprise structured cabling
• Intelligent micro-modular data centres
• AI and hyperscale data centre interconnection

Double-sided contact design; waterproof against 30 kPa air pressure for 5 minutes (male end only); smaller dimensions, high integration and flexible design. Technical data; operating voltage: 12 V DC; withstand voltage: 500 V DC (terminal to terminal); contact resistance: < 30 mΩ; mating cycles: > 30,000

Contact resistance: < 30 mΩ

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscope equipment
• RF/microwave ablation therapy

Rosenberger fibre patch cords are available in many specifications — single-core, dual-core or other customised versions — and are mainly used for indoor fibre interconnection. All Rosenberger industrial-standard connectors are tested to TIA/IEC standards, and every product is 100% tested before leaving the factory.

Fibre type: OS2 / OM3 / OM4 singlemode and multimode; Configurations: simplex / duplex / custom multi-fibre; Connector styles: LC / SC / FC / E2000; End face: PC / UPC / APC; Minimum bend radius: 7.5-15 mm for ultra-flexible types; Insertion loss: <= 0.3 dB; Return loss: >= 50 dB UPC / >= 60 dB APC; Factory testing: 100 % tested; Applicable standards: TIA / IEC

• Mobile communication base station infrastructure construction
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Fiber-optic interconnection between patch panels and fiber-optic interconnection equipment, and between fiber-optic interconnection equipment and patch panels

LC interface fiber optic patch cord; suitable for high-density cabling; balances operational convenience

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The Rosenberger DCS direct-contact system features a high-capacity, compact design and is ideal for space-constrained high-voltage applications requiring direct connection. With a cable cross-section of only 70 mm², it carries 340 A at 85 °C, making it ideal for battery charging or for implementing direct connections between the battery and the motor components in an electric vehicle. The combination of contact blade and retaining blade ensures the simple insertion operation required for a fully secure connection. In addition, this robust and versatile connection system is available in detachable and non-detachable variants.

Current capacity (70 mm²): 340 A at 85 °C; operating voltage 1000 V DC; test voltage 4300 V DC; temperature range -40 °C to +130 °C; compatible wire sizes 35 mm², 50 mm², 70 mm²; FHLR2GCB2G 35 mm² / 0.21 mm

• en
• es
• ar
• ru
• fr

Fiber optic adapters are generally used to connect two fiber optic patch connectors and are typically mounted on 19-inch fiber optic units or fiber optic outlets. A ceramic sleeve precisely aligns the ferrules, ensuring that insertion loss stays at a low level during connection. Rosenberger offers a wide range of common adapters: SC/LC/FC/E2000, etc. Metal ST and FC adapters ensure high and long-term stable mechanical performance, guaranteeing no degradation after repeated use. Compact LC and MT-RJ adapters can increase the number of ports by 100% when dual ports are used.

Connector mating and coupling; multiple interface types; low insertion loss

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Used for data center fiber optic cabling, providing the connection between equipment and MTP/MPO pre-terminated optical cables; for 40G and 100G, where the equipment provides multi-fiber parallel optical transmission ports

MTP/MPO multi-fiber interface; high-density fiber optic connection; factory pre-termination and testing

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

High-voltage fuse. The Rosenberger HV fuse ensures the safety of the high-voltage PDU used in electric vehicles. It features HVIL (high-voltage interlock loop) functionality, is waterproof and vibration-resistant, and has a lightweight plastic housing. The fuse and the corresponding insert can be easily replaced without opening the component housing. Technical characteristics: range 10-40 A, operating voltage max. 850 V DC, test voltage 2700 V DC, temperature range -40 °C to +125 °C, vibration class LV215, PG17-III, IP rating (mated) IPX4, mating cycles ≥ 25. Applications: high-voltage safety of the PDU (power distribution unit). Features and benefits: lightweight, waterproof, versatile.

Range 10-40 A; operating voltage max. 850 V DC; test voltage 2700 V DC; temperature range -40 °C to +125 °C

• en
• es
• ar
• ru
• fr

High-performance input/output for storage networks; network-attached storage and storage servers; input/output for high-bandwidth switches and routers; data center structured cabling; PCI-Express interface interconnection

Integrated optical-electrical conversion within the cable; designed for high-speed data center interconnection; supports longer-distance transmission

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The compact and lightweight low-voltage Rosenberger LVR® 120 connector is ideal for applications such as electric superchargers. With a cable cross-section of 16 mm², it reaches a current of about 120 A at 85 °C and is certified to vibration class 4. In addition, a secondary lock (CPA – connector position assurance) prevents accidental disconnection.

Current capacity (16 mm²): 120 A at 85 °C; operating voltage 48 V DC; test voltage -40 °C to +150 °C; compatible wire size 16 mm²

• en
• es
• ar
• ru
• fr

The multi-purpose indoor distribution optical cable uses several 900 μm flame-retardant tight-buffered fibers as the transmission medium, is covered with a layer of aramid as a tensile strength member, and is finally extruded with a polyvinyl chloride (PVC) or low-smoke halogen-free LSZH jacket.

Various indoor and outdoor construction types; covers different fiber counts and installation methods; suitable for access networks and backbone networks

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The RDC, RQC, NEX10-FO, RMC & QRMC multi-fiber optical connection solutions are mainly used in outdoor scenarios. They are suitable for fiber optic communication between the process level and the bay level in smart substations, including outdoor connections between the bay level and the station control level. The RDC, RQC & RMC™ connection solution can be used, with the fiber distribution frames inside the cabinets connected at both ends; the fiber distribution frame inside the cabinet connects multi-fiber patch cords, which can be connected to equipment ports via ST or LC patch cords. Withstands a wide temperature range from -40 to 85 °C; uses multi-fiber outdoor connectors achieving a protection rating of IP67 or higher; optical cables are required to reach a rodent-resistant grade.

Multiple interface types; low insertion loss and high return loss; compatible with single-mode and multimode fibers; withstands a wide temperature range from -40 to 85 °C; multi-fiber outdoor connectors achieving a protection rating of IP67 or higher; optical cables required to reach a rodent-resistant grade

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems
• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

High-performance input/output for storage networks; network-attached storage; storage servers; input/output for high-bandwidth switches and routers; data center structured cabling; high-density interconnection of network equipment

Direct attach copper cable construction; short-distance high-speed interconnection; low power consumption and low cost

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

Rosenberger data cables are designed specifically for structured cabling systems. The HDCS® cabling system offers a variety of LAN cables ranging from Class C to Class F solutions. CAT. 3; CAT. 5; CAT. 5e; CAT. 6; CAT. 6A (10G); CAT. 7

Product series: HDCS® structured cabling LAN cable; Category: Cat. 6A; Data rate: 10 Gbps; Usable bandwidth: >= 500 MHz; Conductor size: 23 AWG oxygen-free copper; Cable construction: S/FTP double shielded; Characteristic impedance: 100 Ω; Attenuation: <= 35 dB/100 m at 500 MHz; Flame-retardant rating: IEC 60332-1; Minimum bend radius: >= 8 x cable outer diameter

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The newly developed Rosenberger RoDI® connector offers good data transmission performance and is used in medical equipment construction services, industrial control and bus systems. Its unique 5-contact design, combined with a magnetic locking structure, enables fast connection in harsh environments.

Magnetic connection interface; designed for data transmission; supports fast mating and safe disconnection

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

High-voltage components include terminals, shielding, sealing and interlock components that complement high-voltage connectors; together with high-voltage connectors such as HVR®, they form a complete high-voltage connection system.

Terminals, shielding and sealing components for high-voltage connectors; includes high-voltage interlock structures; used together with HVR® series connectors

• NEV high-voltage battery and electric drive systems
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

The Rosenberger 2.0 mm indoor single-core optical cable (CPR Dca) is designed specifically for indoor communication. Rosenberger's consistently high standards in material selection ensure excellent flame-retardant performance, making it an ideal solution for applications with strict flame-retardant rating requirements.

Rosenberger 2.0 mm indoor single-core optical cable (CPR Dca) designed specifically for indoor communication; Rosenberger's consistently high standards in material selection ensure excellent flame-retardant performance, making it an ideal solution for applications with strict flame-retardant rating requirements; Rosenberger 3.0 mm indoor single-core optical cable (CPR Dca) designed specifically for indoor communication; Rosenberger's consistently high standards in material selection ensure excellent flame-retardant performance, making it an ideal solution for applications with strict flame-retardant rating requirements

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The Rosenberger HDCS® CAT.3 module is designed specifically for telephone cabling systems. It is part of the HDCS® structured cabling system, fits all structural hardware designs in this series, and can be mounted on information panels or fixed in desktop information boxes. The product is available in an RJ11 version and is used with transmission protocols such as 10Base-T Ethernet, 155 Mbps ATM and TR-16.

Data and voice information outlet module; for mounting together with panels; suitable for structured cabling horizontal links

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The Rosenberger RoPD® power and data connector is a magnetic connection product capable of transmitting data signals and electrical signals simultaneously. The voltage can reach up to 60 V and the current load up to 40 A. The RoPD® connector uses a magnetic locking design with excellent mating capability, so forced disconnection will not damage the device's connection port.

Magnetic connection method; simultaneous power and data transmission; designed for light electric vehicle (LEV) charging and communication

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

The Taurus modular hybrid optical-copper patch panel is typically used for EDA cabling in data center equipment cabinets, as well as in other areas with hybrid optical-copper patching requirements.

On the official website this series is documented mainly through model selection and installation adaptation notes, covering 2 models; detailed electrical, mechanical and environmental parameters are subject to the official product page/data sheet

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

Faceplates are used for installing information outlets in structured cabling systems, are available in different specifications, and work with data/voice modules to complete desktop termination.

Information outlet mounting faceplate; various specifications and port cutouts; used with data/voice modules

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The magnetic XLR plug uses magnetic mating on XLR audio interfaces, balancing reliable audio transmission with ease of plugging and unplugging, and is suitable for medical, stage and professional audio equipment.

Magnetic mating on XLR audio interfaces; balances transmission reliability with plugging convenience; suitable for professional audio and medical equipment

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

The Pegasus pre-terminated copper cable is used for horizontal links between data center cabinets. Product features: pre-installed copper cables enable rapid on-site installation and reduce on-site labour costs; product performance is guaranteed by the manufacturer, with 100% testing before shipment to ensure product reliability; shielded and unshielded versions in CAT.6 & CAT.6A are available; pre-terminated copper cables with various jacket types such as CM, CMR, CMP and LSZH are available; all pre-terminated copper cables exceed the permanent link performance requirements of TIA 568C and ISO11801, with particularly good short-link performance. Technical requirements: storage temperature range -40 °C to 70 °C.

CAT.6 & CAT.6A shielded and unshielded versions available; storage temperature range -40 °C to 70 °C; operating temperature range -20 °C to 60 °C; ANSI/TIA-568-D; TIA-942-B

• en
• es
• ar
• ru
• fr

The Rosenberger HDCS® voice patch panel offers excellent high-frequency characteristics, is easy to install and can be used with all standard RJ45 connectors. It also provides high flexibility, adaptability and a maximally integrated design. Available in 1HU 25-port and 1HU 50-port versions.

Copper link termination and distribution; rack-mount construction; supports labelling and operations management

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The Rosenberger magnetic RJ45 is an innovative magnetic connector solution for Ethernet connections. Ideal for applications that frequently need to be connected and disconnected, its unique self-aligning and locking magnetic plug ensures correct connection every time, even in the most hard-to-reach places. The RJ45 assembly is easy to clean, and the rugged housing and magnetic construction make the product a durable solution.

RJ45 interface combined with a magnetic structure; supports quick magnetic mating and safe disconnection; suitable for frequent plugging scenarios

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

The Apus high-density modular patch panel is typically used for copper cabling in the various distribution areas of a data center, and is especially suited to areas with high cabling density requirements and limited cabinet space, such as EDA server cabinets, MDA distribution cabinets and SAN network patch cabinets.

48-port high-density copper patching; saves cabinet space; modular termination and operations management

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The Rosenberger HDCS® cable manager is designed to the 19-inch rack standard and is used for horizontal cable management of patch panels and equipment patch cords. Available in plastic and metal versions, in 1U and 2U heights, and in standard and extra-deep variants.

Patch cord routing and fixing; used with fiber optic and copper patch panels; simplifies operations and expansion

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

PowerSystem products are 12 V and 24 V magnetic connectors with a mechanical twist lock. Available designs include straight power receptacles and right-angle power receptacles.

Magnetic power system; provides power transmission and power supply management; supports convenient plugging and safe disconnection

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

The Apus CAT.6 unshielded copper cabling system was developed specifically for unshielded cabling systems. It is used for copper system cabling within the various distribution areas of a data center, supports Ethernet transmission such as 10BaseT/100BaseTX Fast/1000BaseTX Gigabit Ethernet, satisfies high-bandwidth applications for current and future data services over a long period, and is particularly suited to transmission applications of Fast Ethernet protocols at all performance classes.

CAT.6 unshielded copper cabling system; supports gigabit-class copper links; modular termination

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

Application: 10Base-T Ethernet; 100Base-TX Fast Ethernet; 1000Base-T; 155 Mbit ATM; 622 Mbit ATM; TR-16 Active; TR-16 Passive; freely connects with any kind of 1, 2, 4 or 5-pair standard modules; accepts 22-26 AWG wires. Features and benefits.

155 Mbit ATM; 622 Mbit ATM; TR-16 Active; accepts 22-26 AWG wires

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

Quick plugging and unplugging; self-locking function; long service life; high-density mounting

24-pin magnetic connection interface; supports combined data and power; pin count and structure customizable on request

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

Rosenberger copper patch cords and connectors, based on the HDCS series, target structured cabling and transmit voice, data and video signals, supporting future-proof high-bandwidth applications such as Class Ea.

HDCS CAT.6A LAN patch cord; transmits voice/data/video; supports Class Ea; matching CAT.6/CAT.5e/CAT.3 plugs; RJ45 and RJ11 types; for shielded and unshielded cabling

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

Developed and designed for Apus, used for copper system cabling within the various distribution areas of a data center, supporting Ethernet transmission such as 10BaseT/100BaseTX Fast/1000BaseTX Gigabit Ethernet, satisfying high-bandwidth applications for current and future data services over a long period, and particularly suited to transmission applications of Fast Ethernet protocols at all performance classes. Product features: innovatively designed tool-free modules for easy cabling installation; advanced production processes ensure stable cable performance; data patch cords in various design structures are available; each port of the patch panel has a push-pull dust cover providing good dust protection for the module; the patch panel is equipped with a colour labelling system.

Wire gauge: 22-26 AWG; Transmission standard: IEEE 802.3; Frequency range: ≤250 MHz; Shielding type: S/FTP; Impedance: 100 Ω; Insertion life: ≥750 cycles; Category: CAT.6

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The Draco CAT.6A unshielded copper cabling system was developed specifically for unshielded cabling systems. The system meets a bandwidth of 500 MHz and is used for copper system cabling within the various distribution areas of a data center, supporting Ethernet transmission such as 10BaseT/100BaseTX Fast/1000BaseTX Gigabit Ethernet/10GBase-T, satisfying high-bandwidth applications for current and future data services over a long period, and particularly suited to transmission applications of Fast Ethernet protocols at all performance classes.

CAT.6A (Class Ea) unshielded copper cabling system; supports higher bandwidth and frequency; modular termination

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The Draco CAT.6A shielded copper cabling system, developed and designed for this purpose, is used for copper system cabling within the various distribution areas of a data center, supports Ethernet transmission such as 10BaseT/100BaseTX Fast/1000BaseTX Gigabit Ethernet, satisfies high-bandwidth applications for current and future data services over a long period, and is particularly suited to transmission applications of Fast Ethernet protocols at all performance classes. Product features: innovatively designed tool-free modules for easy cabling installation; advanced production processes ensure stable cable performance; data patch cords in various design structures are available; each port of the patch panel has an automatic dust cover with a push-pull self-resetting design.

Wire gauge: 22-26 AWG; Transmission standard: IEEE 802.3; Frequency range: ≤500 MHz; Shielding type: S/FTP; Impedance: 100 Ω; Insertion life: ≥750 cycles; Category: CAT.6A

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The punch-down base used when terminating HDCS® modular jacks has a safety protection function and enables fast installation; the 110-type punch-down tool is suitable for all HDCS® Category 3, Category 5e, Category 6 and Category 6A modular jacks and 110 modules used in structured cabling; the IDC 4&5 pair crimping tool is used to terminate 4-pair or 5-pair 110 modules; the HDCS® rotary cable stripping knife performs excellently when stripping HDCS® Category 3, Category 5e, Category 6 and Category 6A UTP as well as FTP/SFTP cables; the HDCS® RJ45 crimping pliers are suitable for crimping all HDCS® Category 5e, Category 6 and Category 6A modular plugs used in structured cabling as well as telephone modular plugs.

Structured cabling on-site installation tools; matching installation accessories; suitable for fiber optic and copper cabling work

• en
• es
• ar
• ru
• fr

The Rosenberger server cabinet is a high-quality standard 19-inch cabinet with an innovative modular design, ideal for rack-mounted IT equipment. It can be used in various data centers, especially cloud data centers. Product features: static load 1400 kg, dynamic load 1200 kg; IP20 rating; perforation rate above 70%; textured powder coating with a fine feel; suitable for all cabinet equipment complying with the EIA-310 standard; vertical mounting posts with 'U' markings for easy installation; depth-adjustable posts compatible with all IT equipment; two standard cable managers at the rear of the rack.

Operating temperature: -10 to +80 °C; humidity: 5-95 %

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

Waterproof accessories are used for waterproof sealing at base station antenna feeder joints and include waterproof boxes and waterproof tape, ensuring long-term protection of outdoor connection points.

Insulating tape 19 mm x 20 m, used with waterproof putty, suitable for waterproofing feeder joints; insulating tape 50 mm x 10 m, used with waterproof putty, suitable for waterproofing feeder joints; premium insulating tape 19 mm x 20 m, used with waterproof putty, suitable for waterproofing feeder joints; premium insulating tape 50 mm x 10 m, used with waterproof putty, suitable for waterproofing feeder joints; self-adhesive tape 19 mm x 9 m, used with insulating tape, suitable for waterproofing feeder joints

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

A PDU (power distribution unit) is a power distribution socket product designed to provide power distribution for rack-mounted electrical equipment. It is available in multiple series and specifications with different functions, mounting methods and socket combinations, providing a suitable rack-mount power distribution solution for different power environments. The use of a PDU makes power distribution in a cabinet neater, more reliable, safer, more professional and better looking, and makes power maintenance in the cabinet more convenient and reliable. Rosenberger offers three PDU series: standard, smart basic and smart monitoring. The standard PDU is a multi-outlet, cost-effective power product.

In-cabinet power distribution; supports multiple outputs and monitoring; suitable for data center cabinets

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The cable tray system is used for laying and supporting cables in data centers and equipment rooms, provides routing channels that carry optical and copper cables, and works with patch panels and cable management products to build standardized cabling pathways.

Routing channels carrying optical and copper cables; suitable for cable laying and support in data centers; used with patching and cable management products

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

Power cables are used for power supply wiring at base stations and communication sites, offering cable products in different specifications to meet the power transmission needs of site equipment.

Site power supply cables; various core counts and cross-section specifications; suitable for base station DC power supply wiring

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Other installation materials are auxiliary materials for base station and communication site installation, covering cable ties, tape, conduit and other installation consumables.

Site installation auxiliary materials; includes cable ties, tape, conduit, etc.; used together with feeder system installation

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Rosenberger base station solutions are renowned in the industry for their outstanding on-site support and attention to meeting customer expectations. These solutions cover fiber optic, power and RF products as well as installation materials, and are widely used in connection systems for indoor and outdoor sites such as base station towers, rooftop installations, street furniture and lamp posts.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The remote radio unit has become one of the important subsystems in today's and tomorrow's wireless distributed network transmission facilities, used to improve existing signal transmission efficiency and expand network coverage under an easily deployable network architecture. It separates part of the former base station module, separating the radio baseband control (Radios Server, RS) from the RRH, simplifying maintenance work to the RS side; one radio baseband RS can connect several RRHs via fiber optic links, saving space, reducing costs and improving networking efficiency. Remote radio units are generally equipped with standard or customized interfaces for fiber optics, power, data and RF transmission for network transmission and connection.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

High-speed data transmission in modern mobile communication networks requires more efficient network infrastructure support. Passive intermodulation in the network causes a series of interference problems that seriously affect network quality and KPI indicators. Drawing on many years of experience in low-PIM connector design, Rosenberger developed the NEX10 connector, an extremely reliable, miniaturized low-PIM product. The 4.3-10 RF coaxial connector solution: as a global leader in RF connector technology, Rosenberger actively participated in the design and development of the 4.3-10 connector. This product is widely used as the standard interface for communication base station antenna connections. Advantages: stable and reliable low-PIM performance; three selectable styles (screw-on, quick-lock and hand-tight) that fit universal female receptacles.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

In telecommunication systems, if the feeder system and the various devices connected to it are not well protected, signal transmission may become unreliable, with signal attenuation and rising VSWR, which affects the customer experience. Rosenberger feeder system waterproofing solutions are easy to install and provide reliable protection for connections on the feeder system. They are widely used in 3G, 4G, 5G and LTE telecommunication projects for customers worldwide. The waterproofing solutions used in feeder systems cover exposed metal connectors to protect the connection against water accumulation and corrosion and to maintain good radio signals in the feeder system. For different scenarios and requirements, the choice of waterproofing solution also differs. Waterproof tape: waterproof tape has excellent conformability.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

Various conduits and cable protection accessories are widely used in telecommunication systems to protect all kinds of cables in the system from external impact or abrasion.

Recommended operating temperature -15 °C to +70 °C, usually for indoor use; suitable sizes and colours can be selected or designed according to customer requirements; recommended ambient temperature -40 °C to +90 °C, widely used inside outdoor conduits in telecommunication projects

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

In large and complex telecommunication systems, many different cables are deployed indoors and outdoors; Rosenberger cable marking solutions make it easy to define cables and to locate the right cable during maintenance.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Mobile communication base station infrastructure
• Base station FTTA/PTTA interconnection
• FTTx optical access networks
• RF and antenna feeder systems

The Pyxis intelligent infrastructure management system is an IT infrastructure management system combining hardware and software. By monitoring device port status and system connection status in real time and combining this with the algorithms of the software management platform, it provides real-time guidance for IT infrastructure operations and maintenance management, thereby significantly improving the efficiency of IT infrastructure operations and maintenance.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

Rosenberger has more than 25 years of experience in providing data center network infrastructure solutions and is the pioneer of the patented PreCONNECT pre-terminated technology for data centers.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

Rosenberger's HDCS® structured cabling system provides integrated structured cabling solutions based on two major product lines, fiber optic and copper. With high bandwidth, high quality and practicality as its goals, this integrated cabling solution holds a leading position in the cabling industry.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

With the rapid development and wide application of FTTx technology, Rosenberger is committed to providing end-to-end network infrastructure solutions, with product series suitable for the following application scenarios: central office (CO), optical distribution network (ODN), end-user access and in-building applications. Rosenberger's optical products are suitable for end-to-end EPON and GPON systems and meet the upgrade requirements of next-generation networks. Rosenberger's structured and modular product design and configuration not only meet your existing network conditions but can also be economically upgraded to next-generation networks.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

AI and cloud computing are reshaping digital infrastructure. Our fiber optic solutions, centred on scalability, high performance and high reliability, provide a solid foundation for next-generation networks.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Data center network cabling
• Enterprise structured cabling
• Smart micro-module data centers
• AI and hyperscale data center interconnection

The Rosenberger FAKRA connector is a connector used for RF signal transmission. Its excellent electrical, mechanical and environmental performance enables wide application in the automotive antenna field.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• NEV high-voltage battery and electric drive systems
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

A surround view system usually has at least four cameras (one front camera, one rear camera and two side cameras) and requires at least four harnesses to transmit data. In the past, conventional FAKRA and HSD were used, which took up more space on the PCB and in terms of installation space.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• NEV high-voltage battery and electric drive systems
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

Rosenberger has developed two connectors for automotive Ethernet: the unshielded MTD® connector and the H-MTD® connector, which accommodates shielded and unshielded cables. MTD® supports 100M and 1000M Ethernet, while H-MTD® specifies transmission speeds of up to 28 GBit/s.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• NEV high-voltage battery and electric drive systems
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

Rosenberger HFM (High Speed Fakra-Mini) connectors and HSD connectors mainly target in-vehicle 5G applications, in-vehicle infotainment systems and high-speed data transmission.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• NEV high-voltage battery and electric drive systems
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

To provide data communication and power transmission for the light electric vehicle (LEV) industry, Rosenberger has developed a magnetic connector system called RoPD – the Rosenberger power and data connector RoPD.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• NEV high-voltage battery and electric drive systems
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

Thanks to many years of close cooperation with automotive manufacturers in component supply, Rosenberger plays an important role in EMC development and is very familiar with vehicle EMC testing procedures. In addition, Rosenberger has its own in-house EMC laboratory and associated test equipment, enabling it to carry out test development at the subsystem level in accordance with the CISPR 25 radiated emission standard and for immunity, for example according to ISO 11452-4 (BCI method) or ISO 11452-5 (stripline method). In the area of connectors, Rosenberger cooperates with Bedea as a supplier of measuring equipment for triaxial shielding measurement technology in accordance with IEC 62153-4-x.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• NEV high-voltage battery and electric drive systems
• Automotive Ethernet and intelligent driving
• Vehicle antennas and infotainment systems
• Light electric vehicles (LEV)

RF chip and semiconductor test solutions increasingly depend on the high-speed RF transmission performance of connectors and cables. To meet the ever-rising technical requirements and demands of the semiconductor test industry, Rosenberger develops and manufactures multi-port micro coaxial cables and SLC series products with frequencies up to 40 GHz.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyzer testing
• Optical module testing

To meet the stringent requirements of R&D, test laboratories or quality departments, Rosenberger offers a range of high-precision RF test and measurement products.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyzer testing
• Optical module testing

Rosenberger has developed the WSMP series connectors based on the SMP series. These connectors are small in size with frequencies up to 10 GHz, 45% smaller in volume than SMP connectors and 35% smaller than miniSMP (SMPM) connectors.

Application frequency up to 67 GHz; frequency can reach 100 GHz; centre-to-centre spacing 2.15 mm; board-to-board height 3.05 mm

• Solderless mounting to PCB
• Phase matching up to 2 ps
• High-density, small-size, high-stability and highly flexible cable assemblies
• Repairable assembly configurations with 8 and 16 channels available
• WSMP connectors

For microwave measurement and vector network analyzer calibration, Rosenberger develops, manufactures and supplies test and measurement products that meet the requirements of industrial test applications.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyzer testing
• Optical module testing

With the widespread use of all kinds of electrical and electronic equipment, electromagnetic pollution is increasing. To reduce this electromagnetic pollution, shielding measures should be taken for all unit components throughout the electronic system, especially connecting cables and connectors, which requires a standardized measurement method to compare the shielding effectiveness of various shielding structures.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Semiconductor and wafer testing
• Laboratory RF measurement and calibration
• Vector network analyzer testing
• Optical module testing

With the rapid development of medical technology, ablation surgery is widely used for different human organs. The principle of ablation is that when the temperature exceeds 60 °C it causes irreversible damage to human tissue cells; the high temperature generated is used to thermally ablate and destroy diseased cell tissue for therapeutic purposes. Ablation mainly includes RF ablation, microwave ablation, laser ablation, focused ultrasound ablation and so on. In recent years, clinical trials have proven that RF ablation and microwave ablation technologies are mature and effective, and they are increasingly used to treat diseases of different organs.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

Today's medical imaging equipment has many external connector interfaces, mainly for power signals, image signals, control signals and extended processing output signals. Rosenberger is committed to providing innovative quick-plug SLC connection solutions for medical imaging equipment, which can effectively address the above issues.

Frequency range DC to 6 GHz; typical rated current 1.5 A; transmission rate 10 Gbps

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

A medical monitor is an important device for detecting physiological parameters such as the patient's ECG, respiration, non-invasive blood pressure, blood oxygen saturation, pulse and body temperature. If a parameter becomes abnormal, the device issues an alarm so that the doctor can take rescue measures in time. Therefore, connectors for medical monitoring equipment must meet the requirements of high stability, high reliability and high continuity of signal transmission; Rosenberger has introduced interconnect solutions for the medical monitoring category. Rosenberger replaces the push-pull self-locking connection structure with a magnetic structure, which offers excellent performance such as high-frequency signal transmission, high-speed data transmission and high-current transmission; the product's automatic magnetic attachment enables 'zero insertion force' connection by the user to the monitor; a service life of tens of thousands of mating cycles ensures the stability of the device.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

Endoscopes are currently very mainstream medical devices. Through endoscopic imaging technology, doctors can directly observe the shape of tissues inside the human body and pathological changes, especially lesions that X-rays cannot detect, providing an accurate basis for diagnosis. With the use of endoscopes and the help of special surgical instruments, operations that traditionally required large incisions can now be completed with very small incisions, which not only effectively reduces surgical trauma but also improves accuracy and safety. This requires that the connectors and cable assemblies of endoscopy equipment meet strict standards.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

The Rosenberger RoSPE-HMTD is a 360° fully shielded differential connector system for single-pair Ethernet applications. The newly developed system uses a compact and rugged industrial-grade housing suitable for high-speed data transmission, with transmission frequencies up to 15 GHz or 20 Gbps.

The Rosenberger RoSPE-HMTD is a 360° fully shielded differential connector system for single-pair Ethernet applications; the newly developed system uses a compact and rugged industrial-grade housing suitable for high-speed data transmission, with transmission frequencies up to 15 GHz or 20 Gbps; impedance 100 Ω; DC frequency range up to 15 GHz; high data rate up to 20 Gbps; high-frequency range up to 15 GHz; high data rate up to 20 Gbps; high-bit-rate data transmission; compact and rugged miniaturized housing

• Suitable for Ethernet applications
• Internal wiring of SPE machines
• All SPE connections not subject to the IEC 63171 standard
• Suitable for STP, UTP and SPP cables
• Medical imaging and surgical equipment
• Patient monitoring equipment
• Endoscopy equipment
• RF/microwave ablation therapy

Safe and reliable connection solutions for the robotics field — dedicated connectors for motion control, data transmission and power supply in modern robot systems

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

To meet ever more demanding technical requirements and the growing needs of the semiconductor test equipment industry, Rosenberger offers multi-port RF products for 20 GHz, 40 GHz, 70 GHz and 110 GHz applications.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

In response to the rapidly growing global demand for unmanned ground vehicles (UGVs) and delivery robots, Rosenberger now offers a portfolio of high-quality connector solutions suited to the intended purpose.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Antennas
• GPS telematics or navigation
• Mobile communication
• RF Bluetooth/WLAN applications
• Sensors

Rosenberger has a broad range of connection solutions that combine excellent design with high performance, high quality and safety. In addition, our drone portfolio can withstand vibration, is waterproof, adapts to extreme operating temperatures and does so without compromising performance.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Rosenberger's power and data connectors meet the technical requirements of high-speed data transmission in terms of data rate, voltage, current and EMI. Application areas include automotive, industrial and medical, various battery power supplies and charging systems, outdoor equipment, AC/DC converters, industrial vehicles and factory automation.

Current 200 A, 10 kV voltage; data transmission 10 Gbps; frequency range 5.3 GHz; temperature range -40 °C to +140 °C

• Equipment emergency and rescue services
• Battery power supplies and charging systems
• Mobile and professional systems
• Industrial automation

Rosenberger offers a variety of connection solutions for the smart home, such as innovative magnetic interfaces and high-temperature connectors. Rosenberger high-temperature connectors are generally used in utility compartments, boilers and ovens. These durable, quickly recoverable and customizable connector systems are suitable for environments with temperatures up to 450 °C. Rosenberger has expertise in thermal and electrical simulation as well as in processing high-temperature-resistant materials such as ceramics and stainless steel. We work closely with customers and partners to develop cable assemblies, housing connectors and matching antenna systems and other accessories. Features: temperatures up to 450 °C; resistance to corrosion and chemical substances; frequencies up to 2.4 GHz; contactless connection; a variety of suitable form factors; available in various design versions.

Temperature up to 450 °C; frequency up to 2.4 GHz

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT

Reliable communication connection systems have become part of our daily lives. As a well-known manufacturer of connector solutions that provide the necessary infrastructure, Rosenberger offers a comprehensive range of products, services and expertise to meet the growing demands for quality, efficiency and cost-effectiveness.

Solution composition: combination of corresponding Rosenberger product series; system-level electrical, mechanical and environmental parameters are determined by the selected product model

• Industrial automation and robotics
• Machine vision
• Drones and logistics robots
• Smart home and industrial IoT