Suzhou Recodeal Interconnect System

The first major product line under the "Products & Solutions" section of RecoDal's official website, and the business segment with the highest revenue share. It consists of three parts: the power connection system (high-voltage high-current connectors, CCS battery connection systems), the energy-replenishment connection system (battery swap connectors, AC/DC charging guns, charging piles and ultra-fast charging systems) and the intelligent connection system (FAKRA/Mini-FAKRA RF connectors, HSD high-speed data connectors, automotive Ethernet, floating board-to-board connectors). Its customers include mainstream domestic vehicle makers and three-electric system suppliers, and the line has entered the supply chains of well-known overseas automakers.

Voltage platforms covering 400V/600V/750V/800V/1000V DC; rated current from 40A to 500A; ingress protection from IP54 to IP68 and IP6K9K; operating temperature -40°C to +140°C; mechanical life 2,000 to 10,000 mating cycles; salt-spray resistance 48 h to 720 h

• New energy vehicle complete vehicles
• Traction battery packs
• Electric drive and three-electric systems
• Battery swap stations
• Charging piles and ultra-fast charging stations

RecoDal's core electrification product family for new energy vehicles, offering 1-pole to 3-pole high-voltage high-current connection solutions for the vehicle high-voltage loop. It is divided into a plastic-housing series (REB/REG/REG1) and a metal-housing series (RQD/RQF/REQ4/REX/RET/REG2/RQAII/RIPT II). The line covers both circular and rectangular interface forms, and the metal series mostly adopts a push-pull quick-locking structure with integrated high-voltage interlock and shielding. It addresses the connection needs of battery packs, MCUs, PDUs and other high-voltage components.

Rated voltage 1000V DC; rated current 80A to 400A (RQAII 300-400A, REQ4 250A, RQF 180-250A, RQD 80-250A, REG2 120-280A, REX/RET 200-250A, RIPT II 120-300A); 1 to 3 poles; wire range 35 mm² to 70 mm² for the metal series; ingress protection IP6K9K and IP68; 6 anti-mismating keying positions; integrated shielding and high-voltage interlock; operating temperature -40°C to +140°C

• Traction battery packs
• Motor control units (MCU)
• High-voltage power distribution units (PDU)
• Electric drive systems
• High-voltage loops of new energy vehicles

A high-voltage connector family for the medium- and low-current branches of a new energy vehicle high-voltage loop, such as air-conditioning compressors, PTC heaters, DC/DC converters and on-board chargers. The plastic series includes REM, REH, REK and RED, while the metal series includes RQB and RQH. The metal series has a shielded structure with two interface options, the 3-pole C-4 and the 2-pole C-5, suitable for high-voltage auxiliary loads rated 16A to 40A.

Rated voltage 1000V DC; rated current 16A to 40A; 2-pole and 3-pole options; shielded metal housing; optional high-voltage interlock; compatible with 16A/40A class high-voltage conductors

• Electric air-conditioning compressors
• PTC heaters
• On-board chargers (OBC)
• DC/DC converters
• High-voltage auxiliary loads of new energy vehicles

A key component for battery swapping technology that RecoDal continuously develops and mass-produces, used in passenger cars, logistics vehicles, light commercial vehicles and battery swap heavy trucks; the company is one of China's leading battery swap connector manufacturers. The series uses a proprietary X/Y/Z three-axis floating compensation structure, ring-spring female terminals for reliable high-current contact, and a split modular design that separates the connector from the harness. The latest mainstream 12-pin battery swap connector follows the interface defined in national standard GB/T 32879-2025.

PF series: 800V DC/350A (DC), 8A (signal), 3,000 mating cycles, 720 h salt spray, vehicle-side 226×135×94.5 mm, 2 DC pins/1 PE/22 signal/2 interlock, floating X/Y ±8 mm, Z -15 mm; SK series: 600V/250A, 2,000 cycles, IP67; RQ series (logistics vehicles): 600V/135A, 96 h salt spray; PFSC: 600V/125A, IP54, floating ±2.5 mm; PFSC-Y: 400V/160A, IP67; HW: 600V/125A, 3,000 cycles; EB (light commercial vehicles): 800V/100A, 10,000 cycles; ET: 400V/40A; WL (logistics vehicles): 750V/300A, 480 h salt spray, floating X/Y ±5 mm; 12-pin national-standard battery swap connector: 1,500V, 400A continuous, 800A peak for 60 s, IP68/IP6K9K, for 70-120 mm² shielded cable, floating X/Y ±10 mm, Z ±15 mm

• Passenger car battery swapping
• Commercial vehicle and heavy truck battery swapping
• Logistics vehicle battery swapping
• Light commercial vehicle battery swapping
• Battery pack docking at swap stations

A charging gun and charging system line developed by RecoDal for the energy-replenishment scenarios of new energy vehicles, covering AC guns, DC guns and liquid-cooled guns. Leveraging the company's connector technology base, the products use two-shot injection moulding and an ergonomic grip design that improves handling and reduces cost, and can be supplied together with charging pile makers as a one-stop vehicle-to-pile connection system. The liquid-cooled charging gun was launched in recent years, further completing the company's charging gun portfolio.

Covers both AC and DC charging modes; the liquid-cooled charging gun delivers up to 600A at a 1000V voltage platform; high-voltage charging pins handle 500A continuously for 30 min and 660A for 10 min, with a 3-second peak current of 2,000A; about 40% lighter than conventional designs; a liquid-cooling circuit lowers the temperature of the DC terminal hotspot; supports regional interface types such as the European standard

• AC charging piles
• DC charging piles
• High-power liquid-cooled ultra-fast charging piles
• Megawatt-level charging scenarios
• Vehicle energy replenishment for new energy vehicles

A liquid-cooled ultra-fast charging line that RecoDal is focusing on expanding within its energy-replenishment connection systems. By placing a heat-exchange module inside the conventional charging interface and pairing it with liquid-cooled charging cables and liquid-cooling equipment, it enables high-power charging and effectively solves the temperature-rise problem in ultra-fast charging scenarios. The company's liquid-cooled ultra-fast charging technology ranks in the industry's first tier, and the related high-power DC charging gun and European-standard DC liquid-cooled charging gun have been granted utility model patents.

Up to 600A output on a 1000V voltage platform; the liquid-cooled power module consists of a liquid-cooled power terminal and a cooling box in a one-inlet, two-outlet non-isolated cooling structure; the liquid-cooled cable contains several inlet pipes, outlet pipes and power conductors forming a split-flow cooling circuit; meets megawatt-level charging requirements with small, lightweight components

• High-power liquid-cooled ultra-fast charging piles
• Megawatt-level charging stations
• Highway ultra-fast charging networks
• Fast charging of new energy commercial vehicles
• Liquid-cooled cable supply for charging stations

A product line built around complete charging piles and their internal connection systems, including charging interfaces for piles, high-current connectors inside the pile, signal connectors, high- and low-voltage harnesses and ultra-fast charging systems. The company is committed to building one-stop vehicle-to-pile connection system capability and works closely with a number of domestic charging pile makers. This line is an important part of the new energy vehicle energy-replenishment connection system.

High-current connectors with a robust housing and locking structure, available in straight and right-angle versions; metal high-current connectors designed for 30A to 500A, plastic types up to 250A; supplied with high- and low-voltage harnesses and an in-line automatic test system for power cables; supports AC piles, DC piles and ultra-fast charging piles

• AC charging piles
• DC charging piles
• Ultra-fast charging stations
• High-voltage power distribution inside charging piles
• Vehicle-to-pile connection systems

The CCS product line listed separately under the "Products & Solutions" section of RecoDal's official website, an important part of the new energy vehicle power connection system. CCS integrates the cell sensing harness, connection plates and busbars into one unit for voltage and temperature acquisition of the cells inside the traction battery pack and for their series/parallel connection. Together with high-voltage high-current connectors it forms the company's power connection system solution.

Integrated design of busbar, sensing harness and connection plates; supports cell voltage and temperature signal acquisition; compatible with prismatic, cylindrical and other cell formats; mounts together with battery pack structural parts; meets automotive-grade vibration, thermal cycling and dielectric withstand requirements

• Traction battery packs
• Energy storage battery modules
• Cell voltage and temperature sensing
• Series and parallel connection of battery modules

RecoDal's comprehensive intelligent connectivity solution for vehicles, fully self-developed, including FAKRA and Mini-FAKRA RF connectors, HSD high-speed data connectors, automotive multi-gigabit Ethernet connectors, automotive-grade Type-C interfaces and floating board-to-board high-speed connectors. The main applications are infotainment systems, automotive safety systems driven mainly by autonomous driving needs, and in-vehicle high-speed network (Ethernet) systems. The related products have passed AEC-Q100 automotive qualification and entered the supply chains of leading automakers.

FAKRA and Mini-FAKRA RF interfaces; HSD high-speed data transmission; automotive multi-gigabit Ethernet; automotive-grade Type-C interface; floating board-to-board high-speed connectors; compliant with AEC-Q100 automotive qualification; for signal and data transmission in intelligent driving, smart cockpits and in-vehicle high-speed networks

• Intelligent driving systems
• Smart cockpits
• In-vehicle infotainment systems
• In-vehicle high-speed Ethernet
• Automotive safety systems

The MSD is mainly used in the high-voltage main loop of electric vehicles to provide safe and reliable power disconnection during vehicle servicing, and usually integrates a fuse for short-circuit protection. RecoDal's MSDs fall into three categories by application: MSDs for passenger and logistics vehicles (generally below 500V DC with a rated operating current of 200A and fuse currents of 200A to 400A, requiring small size and relatively low cost, typically MSD7 and MSD3), the Mini MSD, and the high-current MSD series for commercial vehicles (MSD, MSD1, MSD2, MSD4, MSD5, MSD9).

Passenger car/logistics vehicle MSD: rated voltage below 500V DC, rated operating current 200A, fuse 200A to 400A, small size and low cost, typical models MSD7 and MSD3; portfolio also includes Mini MSD and MSD, MSD1, MSD2, MSD3, MSD4, MSD5, MSD7, MSD9; integrated fuse for short-circuit protection

• High-voltage main loop of electric vehicles
• Power disconnection for vehicle maintenance
• Short-circuit protection of traction battery packs
• High-voltage loops of energy storage systems
• High-voltage power distribution on commercial vehicles

One of RecoDal's system module products, used for power distribution and protection in the high-voltage loop of new energy vehicles. The PDU integrates high-voltage relays, fuses, pre-charge resistors, current sensing and high-voltage connectors so as to distribute, protect and monitor power between the battery pack and the various high-voltage loads. It is supplied together with the company's high-voltage connectors and harness assemblies.

Integrates high-voltage relays, fuses, a pre-charge circuit and a current sensing unit; includes high-voltage input/output interfaces and signal control interfaces; supports high-voltage interlock loops; the enclosure meets automotive-grade sealing and vibration requirements; customizable to the vehicle high-voltage architecture

• High-voltage power distribution in new energy vehicles
• Output distribution from traction battery packs
• Power supply for electric drive systems
• High-voltage electrical architecture of commercial vehicles

One of RecoDal's system module products, installed inside or close to the traction battery pack and responsible for on/off control of the battery main loop, over-current protection and status monitoring. Together with the PDU, the BDU forms the company's high-voltage electrical system module portfolio for new energy vehicles, and works with the company's in-house high-voltage connectors and busbars for a highly integrated design.

Integrates main-loop relays and fuses; built-in current sensing and high-voltage interlock detection; mounted integrated with the battery pack enclosure; supports an integrated interface for high-voltage connectors and busbars; meets automotive-grade sealing, insulation and vibration requirements

• Main loop of traction battery packs
• Over-current protection of battery packs
• High-voltage electrical systems of new energy vehicles

Part of RecoDal's system module products, integrating electronic control functions with the connection system. The multi-in-one controller combines on-board charging, DC/DC conversion and high-voltage power distribution; the motor controller handles power conversion and control of the drive motor; and the remote monitoring module acquires and uploads vehicle data. These modules are supplied together with the company's connectors and harness assemblies.

Multi-in-one controller integrates OBC, DC/DC and high-voltage power distribution; motor controller for power conversion of the main drive motor; remote monitoring module with data acquisition and remote transmission; module interfaces matched to the company's in-house high-voltage connectors and harness assemblies; customized development per vehicle platform

• Electric drive systems of new energy vehicles
• Integrated high-voltage control of vehicles
• Connected-vehicle data acquisition and remote monitoring

Drawing on a complete industrial chain from mould design and manufacturing through progressive stamping to precision machining, RecoDal supplies automotive connector terminals and matching precision structural parts to external customers. The products include terminals for high-voltage connectors, anti-loosening sleeves for locking screws and interlock pin assemblies for temperature sensors; they can either match the company's own connectors or be supplied independently as components.

Covers connector terminals, fastening and anti-loosening parts and sensor interlock pin assemblies; produced by progressive stamping and precision machining; terminals suited to high-voltage high-current and signal transmission; interlock protection function together with temperature sensors; materials and platings meet automotive-grade corrosion resistance and current-carrying requirements

• High-voltage connectors for new energy vehicles
• Temperature monitoring of traction battery packs
• Anti-loosening locking structures for connectors
• Components for industrial and communication connectors

A product line formed by RecoDal through differentiated design and development for the technical requirements of energy storage products, based on its technology accumulation in new energy vehicle power connection systems. It focuses on commercial and residential energy storage, providing high- and low-voltage energy storage connectors, manual service disconnectors, electrical busbars, high-voltage harnesses and battery connection systems. Residential energy storage projects mainly serve overseas customers, supplying control cabinet assemblies for home PV-storage-charging systems.

Covers both high-voltage and low-voltage energy storage connectors; supplied with manual service disconnectors, electrical busbars and high-voltage harnesses; compatible with commercial energy storage cabinets and residential energy storage systems; supports C&I, large grid and integrated PV-storage-charging smart sites; differentiated design for energy storage duty (weathering, current carrying, ingress protection)

• Commercial energy storage systems
• Residential energy storage systems
• Large-scale grid energy storage
• Integrated PV-storage-charging smart sites
• High-power charge and discharge interfaces for energy storage cabinets

A high- and low-voltage connector series for energy storage systems and the core device of the energy storage connection system line. The products are designed differently for the outdoor and in-cabinet operating conditions of energy storage equipment, meeting the connection requirements between battery clusters, PCS units and cabinets in terms of weather resistance, current-carrying capability and ingress protection. The series can be supplied together with the company's manual service disconnectors, electrical busbars and high-voltage harnesses.

Two voltage classes, high-voltage and low-voltage; differentiated design for energy storage conditions (weathering, corrosion resistance, high current); for power connections between energy storage battery clusters and PCS units; supports quick installation and serviceable removal inside cabinets; can be used with electrical busbars and high-voltage harnesses

• Energy storage battery clusters
• Energy storage PCS converters
• Energy storage cabinets
• Commercial and industrial energy storage systems

A system-level product combination within the energy storage connection system, comprising the battery connection system, high-voltage harnesses, electrical busbars and manual service disconnectors. In commercial energy storage the company cooperates with a number of domestic customers; residential energy storage projects mainly target overseas customers, for which the company supplies control cabinet assemblies for home PV-storage-charging systems. This line reflects the company's ability to extend from components to system modules.

Integrates the battery connection system, high-voltage harnesses, electrical busbars and manual service disconnectors; complete control cabinet assemblies for home PV-storage-charging systems; supports both commercial and residential energy storage duty; harnesses and busbars designed for energy storage current-carrying and temperature-rise requirements

• Home PV-storage-charging systems
• Commercial energy storage plants
• Energy storage control cabinets
• Electrical connection of battery clusters

A connector and structural part line that RecoDal formed by entering the photovoltaic field through solar tracking systems, mainly supplying connectors and structural parts for tracker support systems. The company is also continuously strengthening its technology and market reserves in PV junction boxes and PV controllers, gradually completing its connection system layout in the photovoltaic direction.

Connectors and structural parts for PV tracking systems; outdoor weathering and corrosion resistance; meets the mechanical strength and connection reliability requirements of tracker support systems; complementary reserves in PV junction boxes and PV controllers

• PV solar tracking systems
• PV mounting structures
• PV power plants

One of the products for which RecoDal is continuously building technology and market reserves in the photovoltaic field, used for the electrical connection and bypass protection at the output of PV modules. Together with the company's PV connectors and structural parts and PV controllers, it forms the company's photovoltaic product reserve portfolio, an extension of its industrial and other connection system solutions into the renewable power generation field.

For electrical connection at the output of PV modules; bypass diode protection; meets long-term outdoor weathering and waterproofing requirements; used together with PV connectors and controllers

• PV modules
• Distributed PV power plants
• Centralized PV power plants

One of the products for which RecoDal holds technology and market reserves in the photovoltaic field, used for charge and discharge control and power management in PV power generation systems. Entering through the PV tracking system field and building on its supply of PV connectors and structural parts, the company keeps strengthening its technology and market reserves in PV junction boxes and PV controllers; this is a product extension in its renewable power generation direction.

Charge and discharge control for PV power generation systems; used with PV modules, junction boxes and energy storage batteries; supports integrated PV-storage-charging systems; available in multiple specifications for different generation scales

• PV power generation systems
• Integrated PV-storage-charging systems
• Off-grid and grid-connected PV plants

The communication product line under the "Products & Solutions" section of RecoDal's official website, covering two main solutions: mobile communication base stations and data centres. In mobile base stations the company has established engineering technology research centres such as HTTA (Hybrid to the antenna), becoming an important supplier to the world's leading communication equipment manufacturers in the 5G era. In data centres the company has developed high-speed cable products such as passive copper cables (DAC) and active copper cables (ACC, AEC).

Covers mobile communication base stations and data centres; the base station side includes board-to-board RF blind-mate connectors, optical-electrical module integrated connectors and RSMP/SCC/millimeter-wave connectors; the data centre side includes DAC, ACC and AEC high-speed cables, high-speed board-to-board connectors, backplane connectors and the SFP+/CAGE series; AEC has reached volume delivery at 400G/800G, with 1.6T samples sent to North American customers

• 5G/5.5G mobile communication base stations
• Data centres
• AI and servers
• 6G communication and LEO satellite communication
• Commercial space

Board-to-board RF blind-mate connectors developed by RecoDal for 5G Massive MIMO antennas and the core product of the company's communication business. The company uses a multi-split insulator to compensate impedance, achieving low insertion loss, low VSWR and low microwave leakage under floating-tolerance mounting and breaking the patent blockade held by overseas connector companies in the 4G era. The portfolio covers the WSMP, GSMP and RSMP series and is continuously iterated for 5.5G and 6G requirements.

Multi-split insulator impedance compensation technology; supports blind mating and floating-tolerance mounting; low insertion loss, low VSWR and low microwave leakage; for 5G Massive MIMO antenna and RF unit interconnection; portfolio includes WSMP, GSMP and RSMP; suited to 5.5G base station build-out, with multiple project nominations from benchmark customers

• 5G/5.5G Massive MIMO base station antennas
• Radio remote units (RRU)
• 6G communication equipment
• LEO satellite communication

Optical-electrical module integrated connectors developed by RecoDal for wireless base stations, integrating the transmission of optical and electrical signals in a single connection interface; one of the important new connectors in the company's 5G base station connection system portfolio. The product helped the company become an important supplier to the world's leading communication equipment manufacturers in the 5G era and can be used together with the HTTA hybrid optical-electrical tower-mounted connection system.

Integrated transmission of optical and electrical signals; for optical-electrical module interconnection in wireless base stations; supports miniaturized and highly integrated base station design; used together with the HTTA hybrid optical-electrical tower system

• 5G wireless base stations
• Base station optical-electrical module interconnection
• Integrated design of communication equipment

Floating integrated SCC-type connectors independently developed by RecoDal, a next-generation communication connector for 5.5G base station build-out. The floating integrated structure absorbs installation tolerances, making it suitable for scenarios requiring blind-mate alignment such as base station antennas and RF units. The series has won multiple project nominations from benchmark customers and is continuously upgraded in line with emerging needs such as 6G and LEO satellite communication.

Floating integrated structure absorbs installation tolerances; supports blind mating; for 5.5G base station build-out; multiple project nominations from benchmark customers; upgradeable for 6G and LEO satellite communication requirements

• 5.5G base stations
• Blind-mate interconnection of antennas and RF units
• 6G communication equipment

Millimeter-wave connectors independently developed by RecoDal for 5.5G and higher-frequency communication needs. The products suit 5.5G base station build-out and have won multiple project nominations from benchmark customers, while being continuously upgraded for emerging needs such as 6G and LEO satellite communication. Together with board-to-board RF blind-mate connectors and SCC-type connectors, they form the company's base station RF interconnection product matrix.

RF transmission in the millimeter-wave band; suited to 5.5G base station build-out; project nominations from benchmark customers; iterative upgrades for 6G and LEO satellite communication requirements

• 5.5G base stations
• Millimeter-wave communication systems
• LEO satellite communication
• 6G communication equipment

RecoDal's RF product line, covering standard RF connectors such as SMA and MCX as well as RF coaxial cable assemblies. The products are used for signal interconnection in communication equipment, base station antenna feeder systems and test instruments, and are representative of the microwave direction among the company's five connection capabilities: optical, electrical, microwave, fluid and data. The company also offers Mini BTB high-speed board-to-board products.

Standard RF interfaces including SMA and MCX; RF coaxial cable assemblies; Mini BTB high-speed board-to-board products; for base station antenna feeder and in-equipment RF interconnection; meets high-frequency, low-loss transmission requirements

• Mobile communication base station antenna feeder systems
• RF interconnection in communication equipment
• Test and measurement equipment
• RF cable assembly supply

The product line corresponding to the HTTA (Hybrid to the antenna) engineering technology research centre built by RecoDal, providing hybrid optical-electrical connection solutions for base station tower-top antenna feeder systems. The company hosts the Jiangsu Provincial Engineering Technology Research Centre for Hybrid Cable-to-Tower Antenna Feeder Connection Systems, and this line is one of its core technology carriers in the mobile communication base station direction.

Integrated hybrid optical-electrical transmission; for base station tower-top antenna feeder systems; supports hybrid cable-to-tower connection; developed by the Jiangsu Provincial Engineering Technology Research Centre for Hybrid Cable-to-Tower Antenna Feeder Connection Systems; resistant to outdoor base station environments with lightning protection and grounding

• 5G base station tower-top antenna feeder systems
• Hybrid optical-electrical cable-to-tower connection
• Mobile communication base station construction

RecoDal's layout in optical connectivity: the company has R&D and production capability for optical, electrical, microwave, fluid and data connection system products, and is progressively establishing a passive optical device R&D and manufacturing business. This line focuses on various optical fiber connectors, meeting the growing demand of downstream optical module makers, and can be supplied together with the company's optical cable assemblies.

Focused on various optical fiber connectors; covers R&D and manufacturing of passive optical devices; meets the supporting needs of optical module makers; can be supplied together with optical cable assemblies; capable of supplying integrated optical-electrical connection products

• Optical fiber communication networks
• Optical module supply
• Data centre optical interconnection
• Optical connection in communication equipment

High-speed cable products for data centres that RecoDal prioritised for development based on its high-speed connection system technology reserves in mobile communication base stations, including passive copper cables (DAC) and active copper cables (ACC, AEC). These products are mainly used for short-distance high-speed data communication within data centres, partly replacing the fiber-plus-optical-module approach and reducing data centre construction cost and energy consumption. 400G/800G AEC is now being delivered in volume, and 1.6T products have been sampled to North American customers.

Includes passive copper cable DAC and active copper cables ACC and AEC; for short-distance high-speed data communication inside data centres; 400G/800G AEC in progressive volume delivery; 1.6T products sampled to North American customers; can partly replace fiber-plus-optical-module solutions, cutting construction cost and energy consumption

• Intra-data-centre interconnection
• AI and server clusters
• High-speed switch interconnection
• Short-reach communication within and between racks

A product line created by RecoDal through breakthroughs in high-speed board-to-board and backplane connectors based on its own technical strengths, forming a rich product portfolio that has gained customer recognition. The products address board-level high-speed signal interconnection inside data centres, communication equipment and servers, and together with the company's high-speed cable products form its high-speed communication interconnection solution.

Covers both high-speed board-to-board and backplane connectors; for board-level high-speed signal transmission; forms a combined solution with high-speed cable products; for interconnection inside data centres and communication equipment; rich portfolio already recognised by customers

• Data centre equipment
• Server motherboard interconnection
• Communication equipment backplanes
• AI computing equipment

RecoDal's product line for optical module interfaces in data centres and communication equipment, including SFP+ connectors and the CAGE series. The company has achieved technical breakthroughs in both products, forming a rich portfolio that supports its data communication connection system solutions together with high-speed cables, high-speed board-to-board connectors and backplane connectors.

Covers SFP+ connectors and the CAGE series; for the interface between optical modules and equipment mainboards; supports high-speed signal transmission with shielding and heat dissipation; for data centre and communication equipment ports; used together with high-speed cable products

• Data centre switching equipment
• Optical module ports of communication equipment
• Server network interface cards
• SFP+ optical module supply

Input/output connection solutions developed by RecoDal for the radio remote unit (RRU) and antenna ports of mobile communication base stations, used for power and signal interconnection between the tower-top RF unit and the antenna. This line forms part of the company's mobile communication base station connection system portfolio and is supplied together with board-to-board RF blind-mate connectors and HTTA systems.

For RRU and antenna port interconnection; supports combined power and signal transmission; withstands outdoor and tower-top installation environments; designed for water and dust protection and lightning protection; used with HTTA hybrid optical-electrical systems

• Mobile communication base station RRUs
• Base station antenna ports
• Tower-top RF interconnection

RecoDal's cable assembly system solutions for communication base stations and networks, covering fiber optic cable assemblies, RF cable assemblies and AISG control cables. Supplied together with the company's connectors and connection systems, the products serve base station antenna feeder and inter-equipment signal transmission scenarios, demonstrating the company's system-level supply capability in communication interconnection.

Covers fiber optic, RF and AISG cable assemblies; for base station antenna feeder and inter-equipment interconnection; supplied as a set with the company's connector products; meets the weathering and protection requirements of outdoor communication environments

• Mobile communication base station antenna feeder systems
• Signal transmission between communication equipment
• AISG remote electrical tilt antenna control
• Communication network cabling

The industrial product line under the "Products & Solutions" section of RecoDal's official website, mainly used in rail transit, medical devices, robotics, wind power, photovoltaics and power industries. The line includes heavy-duty connectors, coupler connectors, industrial connectors, special connectors, robot connectors and medical connectors, and is the company's third major business direction after new energy and communications.

Covers rail transit, medical, robotics, wind power, photovoltaics and power applications; products include heavy-duty connectors, coupler connectors, industrial connectors, special connectors, robot connectors and medical connectors; resistant to harsh environments and vibration; available in circular, rectangular and other formats

• Rail transit
• Medical devices
• Robotics
• Wind power and photovoltaics
• Power and industrial control

RecoDal's industrial connector line for industrial control, data processing equipment, test and medical equipment, including circular and rectangular connectors in various specifications for power and signal transmission and industrial Ethernet systems. The portfolio also includes plastic and metal signal connectors, with the metal types offered in bayonet-lock and push-pull locking structures.

Circular and rectangular connectors in multiple specifications; plastic signal connectors rated 7A, 300V DC, with 8, 12, 18 and 32 poles; metal bayonet circular signal connectors in 5/7/8/12/19/26/37/46 poles; metal push-pull signal connectors in 6/8/12/14 poles; supports industrial Ethernet transmission

• Industrial control
• Data processing equipment
• Test and medical equipment
• Industrial Ethernet systems
• Power and signal transmission

The heavy-duty connector within RecoDal's industrial connection system line is a high-current, high-voltage rectangular connector mainly used in rail transit, wind power and other power and energy scenarios. With good environmental and vibration resistance, it maintains connection reliability under harsh conditions and is one of the company's flagship products in the power and energy direction of its industrial and other connection systems.

High-current, high-voltage rectangular connector construction; for rail transit, wind power and other power and energy scenarios; good environmental and vibration resistance; meets long-term connection reliability requirements under harsh industrial conditions

• Rail transit vehicles
• Wind power generation equipment
• Power and energy equipment
• Harsh industrial environments

Coupler connectors developed by RecoDal for rail transit vehicles, featuring up to 216 contact pairs and used for overall signal and power connection and transmission between carriages in rail transit, with a quick-coupling interchange function. The product is a core device of the company's rail transit connection system solution.

Up to 216 contact pairs; for overall signal and power connection between carriages; quick-coupling interchange function; meets the vibration and environmental reliability requirements of rail transit vehicles

• Rail transit vehicles
• Inter-carriage signal and power connection
• Metro and urban rail vehicles

A series of connectors developed by RecoDal according to the needs of the robotics industry, used for batteries, controllers, actuators and in-body power and covering robot power, control and signal connections. The company's self-developed humanoid robot products are mainly low-voltage connectors, power connectors, and Type-C and Ethernet harness series. This line is an important part of the company's positioning in emerging fields such as humanoid robots and low-altitude flight.

Covers robot power, control and signal connectors; includes low-voltage connectors, power connectors and Type-C and Ethernet harness series; for batteries, controllers, actuators and in-body power connections; the company participates in drafting group and local standards for humanoid robots

• Humanoid robots
• Industrial robots
• Robot controllers and actuators
• Robot battery and power systems

A line of high- and low-voltage connectors and harness assemblies developed by RecoDal for the low-altitude aircraft field (including flying cars and eVTOL). Building on its technical accumulation in automotive-grade high-voltage high-current connectors and harness assemblies, the company extends into low-altitude aircraft electrical systems; the related products are one of its emerging business layouts in industrial and other connection systems.

Covers both high-voltage and low-voltage connectors; supplied with matching harness assemblies; for low-altitude aircraft electrical systems; the company participates in drafting group and local standards for low-altitude flight; designed for lightweight and high reliability

• Low-altitude aircraft
• Flying cars and eVTOL
• UAV electrical systems

The endoscope insertion section series within RecoDal's connector and assembly line for medical devices. The products include insertion sections for ureteroscopes, cystoscopes, choledochoscopes and hysteroscopes and can be used with electronic endoscope image processors for the examination, diagnosis and treatment of urinary and gynaecological diseases. The series belongs to the company's single-use endoscope related connectors and assemblies.

Includes insertion sections for ureteroscopes, cystoscopes, choledochoscopes and hysteroscopes; used with electronic endoscope image processors; single-use design; meets precision and biocompatibility requirements for medical devices; supplied with matching connectors and assemblies

• Diagnosis and treatment of urinary system diseases
• Diagnosis and treatment of gynaecological diseases
• Electronic endoscope image processor supply
• Single-use endoscopic instruments

The ablation series within RecoDal's connector and assembly line for medical devices, mainly comprising semi-rigid wires, RF connectors and puncture needles and used chiefly with radiofrequency, microwave and cryogenic ablation devices. These products destroy diseased tissue by physical means and are widely used in tumour treatment, cardiovascular disease treatment and gynaecological treatment.

Mainly includes semi-rigid wires, RF connectors and puncture needles; used with radiofrequency, microwave and cryogenic ablation devices; destroys diseased tissue by physical means; meets precision machining and biocompatibility requirements for medical devices

• Tumour ablation therapy
• Cardiovascular disease treatment
• Gynaecological disease treatment
• Radiofrequency, microwave and cryogenic ablation devices

A connection system solution formed by RecoDal for the rail transit equipment field, including heavy-duty connectors, coupler connectors and locomotive air-conditioning connectors and mainly serving inter-carriage signal and power connections and on-board equipment interconnection. The company has passed IRIS international railway industry standard certification and its products are used in rail transit equipment.

Includes heavy-duty connectors, coupler connectors and locomotive air-conditioning connectors; coupler connectors with up to 216 contact pairs and quick-coupling interchange; meets the vibration and environmental reliability requirements of rail transit vehicles; the company is certified to the IRIS international railway industry standard

• Rail transit vehicles
• Locomotive air conditioning
• Urban rail transit equipment
• Railway signal and power connection

The vehicle communication (connected car) connection system product line listed separately under the "Products & Solutions" section of RecoDal's official website, addressing in-vehicle high-speed network needs and communication between the vehicle and the outside world. Centred on automotive Ethernet connectors, HSD high-speed data connectors and FAKRA/Mini-FAKRA RF connectors, the products are used in signal and high-speed data connection scenarios such as intelligent driving, smart cockpits and infotainment systems.

Core products are automotive Ethernet, HSD high-speed data and FAKRA/Mini-FAKRA RF connectors; supports in-vehicle high-speed data transmission and off-board communication; meets automotive-grade vibration, temperature and EMC requirements; related products have passed AEC-Q100 automotive qualification

• Connected car communication
• Intelligent driving
• Smart cockpits
• In-vehicle infotainment systems
• In-vehicle high-speed networks

The electrical busbar (BUSBAR copper bar system) product line listed separately under the "Products & Solutions" section of RecoDal's official website, used for high-current electrical energy transmission and distribution in new energy vehicles, energy storage and industrial equipment. The laminated structure of the busbar reduces loop inductance, and together with the company's high-voltage connectors and high-voltage distribution units it forms a complete power connection solution, an important part of the company's power connection system.

Laminated busbar structure reduces loop inductance; for high-current power transmission and distribution; used with high-voltage connectors and PDU/BDU; materials and insulation meet dielectric withstand and temperature requirements; custom development to customer structures

• High-voltage power distribution in new energy vehicles
• Battery cluster connection in energy storage systems
• Motor controllers and electric drive systems
• High-current transmission in industry

The cable assembly and wiring harness product line listed separately under the "Products & Solutions" section of RecoDal's official website, covering RF cable assemblies, signal cable assemblies, power cable assemblies, optical cable assemblies and automotive wiring harnesses. The company has high- and low-voltage harness production capability and is equipped with an in-line automatic test system for power cables to ensure product quality; the harness products are widely used in new energy vehicles, communication equipment and industrial equipment.

Covers RF, signal and power cable assemblies and optical cable assemblies; includes automotive wiring harnesses and high-voltage harnesses; equipped with an in-line automatic test system for power cables; most products are UL and TUV certified; meets vehicle and equipment-level routing requirements

• Vehicle wiring in new energy vehicles
• High-voltage harnesses for traction battery packs
• Cable assemblies for communication equipment
• Internal cabling of industrial equipment

RecoDal's main business covers the R&D, production and sale of connection systems, microwave components and other products, with microwave components and connection systems being the company's two main product categories. The company is one of the few in China with simultaneous R&D and production capability for optical, electrical, microwave, fluid and data connection system products; its microwave components mainly serve communication and RF applications.

Microwave components are one of the company's two main product categories; based on the company's microwave and RF connection technology platform; for communication and RF application scenarios; forms a product combination with RF connectors and RF cable assemblies

• Mobile communication base stations
• RF and microwave transmission systems
• Interconnection of communication equipment